NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Bedienungsanleitung

)NSTALLATION'UIDE

ProSafe SSL VPN Concentrator 25 SSL312

Start Here

Follow these instructions to set up your SSL VPN Concentrator. You can also

consult the documentation links on the Resource CD or the NETGEAR

Knowledgebase link at http://kbserver.netgear.com.

The ProSafe SSL VPN Concentrator 25 is a browser-based VPN portal that is

compatible with Microsoft Internet Explorer 6.5.1 or above, or Apple Safari.1.2 or

above. However, for the initial administrative setup of the SSL312, you can also

use Mozilla 1.x. (End Users will need IE or Safari browsers that support

JavaScript, Java, cookies, SSL and ActiveX to take advantage of the full suite of

applications.)

First, Set up the SSL VPN Concentrator

1. CONNECT THE SSL VPN CONCENTRATOR TO YOUR COMPUTER

a. Unpack the box and verify the contents.

b. Prepare a PC with an Ethernet adapter. If this PC is already part of your

network, record its TCP/IP configuration settings. Configure the PC with

a static IP address of 192.168.1.10 and 255.255.255.0 as the subnet mask.

c. Securely connect the Ethernet cable to Ethernet Port 1 (1) on the front of

the SSL VPN Concentrator; securely insert the other end of the cable into

the Ethernet port on your computer.

d. Connect the power cord to the SSL312 and turn on your computer.

e. Turn the SSL312 power switch to On, and verify the following:

•Power. The power light should be lit (2). If the power light is not lit,

check the connections and check to see if the power outlet is

controlled by a wall switch that is turned off.

•Test. The test light should blink when the SSL312 is first turned on

(3). When the system has initialized, the light will turn off.

•LAN. Either the 10 Mbps or the 100 Mbps LED should light to show

that a connectivity link as been established (4). If not, make sure the

Ethernet cable is securely attached at both ends.

2. CONFIGURE THE MANAGEMENT INTERFACE OF THE SSL VPN

CONCENTRATOR

Note:You must have administrative access to your network’s gateway device

to configure the Management Interface settings.

a. Connect to the SSL312 by opening your browser and entering

https://192.168.1.1 in the address field. A security warning may appear.

Click Yes or OK to continue.

b. When prompted, enter admin for the user name and password for the

password, both in lower case letters. Select geardomain from the Domain

drop-down menu and click Login.

c. Configure the network settings to deploy the SSL VPN Concentrator in

your network. Typical scenarios for deployment would be

• As a standalone SLL VPN device connected to a separate access

router or firewall performing perimeter security.

• Connecting the SSL VPN Concentrator to an existing LAN behind a

firewall.

https://192.168.1.1

• Connecting the SSL VPN Concentrator to a DMZ interface.

• Deployed online with two network interfaces enabled; or as a bridge

to a special network.

See the online help or the Reference Manual for full instructions on selecting

the appropriate settings for the deployment option for your network.

After you have finished the setup steps, you are ready to deploy the SSL312 in

your network. If needed, you can now reconfigure the PC you used in step 1

back to its original TCP/IP settings.

Deploy the SSL312

1. Disconnect the SSL312 and position it where you will deploy it in your

network based on the configuration scenario you selected above.

2. Connect an Ethernet cable from your SSL312 to an Ethernet port on your

firewall, router, switch, or hub.

3. Connect the power cord to the SSL VPN Concentrator and to a power outlet.

The PWR, TEST, and 10M/100M lights should light up.

Now, Test your Configuration

1. From a PC on your network, open a browser window using Internet Explorer

6.5.1 or higher or Apple Safari 1.2 or higher.

2. Enter the default IP address of the SSL312 (https://192.168.1.1) or, if you

changed the default address, enter your new SSL312 address.

3. When prompted, enter admin for the user name and password for the

password or, if you changed the password, enter your new password. Select

geardomain from the Domain drop-down menu and click Login.

You should now be logged in to the SSL VPN Concentrator.

June 2006

This symbol was placed in accordance with the European Union

Directive 2002/96 on the Waste Electrical and Electronic Equipment (the

WEEE Directive). If disposed of within the European Union, this

product should be treated and recycled in accordance with the laws of

your jurisdiction implementing the WEEE Directive.

United States and/or other countries. Other brand and product names are trademarks or registered trademarks of

Troubleshooting Tips

Here are some tips for correcting simple problems you may have.

No lights are lit on the SSL VPN Concentrator.

The SSL VPN Concentrator has no power.

• Make sure the power cord is connected to the concentrator and plugged in to a

working power outlet or power strip.

• Make sure that the power outlet is turned on (if controlled by an On/Off switch).

The Ethernet light is not lit.

There is a hardware connection problem.

• Make sure the cable connectors are securely plugged in at the concentrator

and the network device (hub, switch, or router).

• Make sure the connected device is turned on.

I cannot configure the concentrator from a browser.

Check these items:

• The SSL312 is properly installed: the Ethernet cable is plugged into the

Ethernet Port 1 on the SSL VPN Concentrator and to your Ethernet port on

your computer and it is powered on. Check that the 10/100 port LED is green

to verify that the Ethernet connection is OK.

• Make sure you using Microsoft Internet Explorer Browser 6.5.1 or above to

configure your management interface.

• Make sure that your PC’s Static IP address is set to 192.168.1.10 and the

default Subnet Mask to 255.255.255.0. Your domain should be set to

geardomain on the login screen.

I cannot access the SSL VPN Concentrator remotely.

There is a configuration problem. Check these items:

• Check the network settings for the configuration scenario you selected (see

the Reference Manual).

• Make sure that you do not have an IP addressing conflict on your network; for

example, no other device has the same Ethernet Port 1 IP address or Static IP

address as the SSL VPN Concentrator. For full instructions on changing the

SSL VPN Concentrator default values, see the Reference Manual on the

Resource CD.

Technical Support

Thank you for selecting NETGEAR products.

To register your product, go to: http://www.netgear.com/register

Go to http://www.netgear.com/support for support information.

Andere Handbücher für SSL312 - ProSafe SSL VPN Concentrator 25

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Betriebsanleitung

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX220 Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR Orbi Pro Satellite Bedienungsanleitung

NETGEAR

NETGEAR FWG114Pv2 - Wireless Firewall With USB Print... Bedienungsanleitung

NETGEAR

NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WG102-500 Bedienungsanleitung

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

NETGEAR

NETGEAR FUSE Technisches Datenblatt

NETGEAR

NETGEAR ProSafe Premium WNDAP660 Bedienungsanleitung

NETGEAR

NETGEAR WND930 Bedienungsanleitung

NETGEAR

NETGEAR WAG302v1 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WNDR4300-TN Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNAP320 Bedienungsanleitung

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE WN203-200PES Bedienungsanleitung

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Montage- und Wartungsanleitung

NETGEAR

NETGEAR WAG102 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WN370 Bedienungsanleitung

NETGEAR

NETGEAR WG103 ProSafe Bedienungsanleitung

NETGEAR

NETGEAR WAB102 - 802.11a+b Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR N150 WN604 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung