NETGEAR WAC510 Bedienungsanleitung

User Manual

Insight Managed Smart Cloud

Wireless Access Point

Model WAC510

NETGEAR, Inc.

350 E. Plumeria DriveAugust 2019

San Jose, CA 95134, USA202-11840-06

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you use

only official NETGEAR support resources.

Compliance and Conformity

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Do not use this device outdoors. If you connect cables or devices that are outdoors to

this device, see http://kb.netgear.com/000057103 for safety and warranty information.

Trademarks

Any non-NETGEAR trademarks are used for reference purposes only.

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

Revision History

CommentsPublish DatePublication

Part Number

We added the following sections:

AP mode only: Specify an existing domain name on page 142

Set up and manage captive portals for WiFi networks on page 64 and Set up an

external captive portal for a WiFi network on page 67

You enter the wrong password and can no longer log in to the access point on

page 224

We made major changes to the following sections:

point, you now must use an HTTPS browser connection.)

Manage user accounts on page 117

Change the admin user account password on page 164

Back up the access point configuration on page 176 and Restore the access point

configuration on page 178

In other sections, we made minor changes in relation to the new features.

We removed the section about enabling and disabling Telnet. A Telnet connection

to the access point is no longer supported.

August 2019202-11840-06

We published the manual in a new style and added About NETGEAR Insight on

page 13.

We made major changes to the following sections:

Connect over WiFi using a WiFi-enabled computer or mobile device on page 29

Connect over Ethernet using a computer connected to the same network on

page 33

Connect over Ethernet using a directly connected computer on page 37

Set up an open or secure WiFi network on page 45

Enable or disable band steering with 802.11k RRM and 802.11v WiFi network

management on page 57

Change the channel width for a radio on page 83

Manage load balancing for the radios on page 97

Manage the maximum number of clients for a radio on page 94

Change the management mode to NETGEAR Insight or Web-browser on page

160

View the access point Internet, IP, and system settings on page 189

View the WiFi radio settings on page 192

Factory default settings on page 228

We made other minor changes and corrections throughout the manual.

We removed Set up a WiFi on/off schedule for the radios, which is replaced by

Disable or enable a WiFi network or set up a WiFi activity schedule on page 52.

We removed information about the Power LED alternating green and amber,

which is not an option for the Power LED.

February 2019202-11840-05

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

(Continued)

CommentsPublish DatePublication

Part Number

We added the following sections:

Safety instructions and warnings on page 17

Enable or disable URL tracking for a WiFi network on page 60

Set a data volume limit for the access point on page 98

Router mode: Specify WAN Point-to-Point Protocol over Ethernet settings on

page 132

Schedule the access point to reboot on page 180

View or download tracked URLs on page 203

View the data volume consumption on page 208

Check the Internet speed on page 216

We made major changes to the following sections:

Set up an open or secure WiFi network on page 45

Disable or enable a WiFi network or set up a WiFi activity schedule on page 52

Manage the advanced WiFi settings for the radios on page 91

Add a user account on page 117

Disable the DHCP client and configure a LAN or WAN IP address on page 129

Router mode: Disable the DHCP client and specify a fixed WAN IP address on

page 131

Router mode: Enable the DHCP client and let the access point obtain a WAN IP

address on page 136

Perform a ping test on page 214

We made other minor changes and corrections throughout the manual.

July 2018202-11840-04

We added Connect over the Internet using the NETGEAR Insight Cloud portal

on page 27, and, throughout the manual, information about the NETGEAR Insight

Cloud portal.

We made major changes to the following sections:

Top panel with LEDs on page 14

Manage local MAC access control lists on page 110, including Manually set up a

MAC access control List on page 110 and Import an existing MAC access control

list on page 114

Enable or disable inter-VLAN routing on page 157

Insight LED is off on page 220

We made other minor changes and corrections throughout the manual.

The client separation feature is now referred to as the client isolation feature (see

Set up an open or secure WiFi network on page 45 and Enable or disable client

isolation for a WiFi network on page 55)

February 2018202-11840-03

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

(Continued)

CommentsPublish DatePublication

Part Number

We added or made major changes to the following sections:

Set up an open or secure WiFi network on page 45

Enable or disable PMF for a WiFi network on page 59

Manage local MAC access control lists on page 110, including Manually set up a

MAC access control List on page 110 and Import an existing MAC access control

list on page 114

Change the management mode to NETGEAR Insight or Web-browser on page

160

Manually download firmware and upgrade the access point on page 171

Revert to the backup firmware on page 173

Perform a ping test on page 214

Technical specifications on page 231

For all sections to which it applies, we added a step that describes the action that

is required in the pop-up warning window.

December

2017

202-11840-02

We added or made major changes to the following sections:

Connect over WiFi using a WiFi-enabled computer or mobile device on page 29

Connect over Ethernet using a computer connected to the same network on

page 33

Connect over Ethernet using a directly connected computer on page 37

Set up an open or secure WiFi network on page 45

Set up a click-through captive portal for a WiFi network on page 65

Unregister the access point from Facebook Wi-Fi on page 75

Manage the advanced WiFi settings for the radios on page 91

Manage neighbor AP detection on page 120

Set up RADIUS servers on page 126

Disable the DHCP client and configure a LAN or WAN IP address on page 129

September

2017

202-11840-01

(202-11840-01, September 2017, Continued)

Enable the DHCP client on page 135

Set the 802.1Q VLAN and management VLAN on page 138

Enable or disable IGMP snooping on page 145

Router mode only: Manage DHCP servers on page 148, including Manage the

default DHCP server on page 149 and Enable or disable inter-VLAN routing on

page 157

Change the management mode to NETGEAR Insight or Web-browser on page

160

Manage the LEDs on page 186

View unknown and known neighbor access points on page 195

View client distribution, connected clients, and client trends on page 197

View WiFi and WAN traffic, traffic statistics, and channel utilization on page 201

View a WiFi bridge connection on page 207

Capture WiFi and Ethernet packets on page 212

In addition, we made minor changes to other sections and updated some figures.

September

2017

202-11840-01

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

(Continued)

CommentsPublish DatePublication

Part Number

We made major changes to the following sections:

Connect over WiFi using the NETGEAR Insight App on an iOS or Android mobile

device on page 26

Connect over WiFi using a WiFi-enabled computer or mobile device on page 29

Connect over Ethernet using a computer connected to the same network on

page 33

Connect over Ethernet using a directly connected computer on page 37

Set up an open or secure WiFi network on page 45

Block specific URLs and keywords for Internet access on page 108

Change the system mode to Router mode or AP mode on page 162

In addition, we made minor changes to other sections and updated some figures.

April 2017202-11686-02

First publication.December

2016

202-11686-01

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

Contents

Chapter 1 Hardware Overview of the Access Point

About NETGEAR Insight....................................................................13

Related documentation.....................................................................13

Unpack the access point....................................................................13

Top panel with LEDs...........................................................................14

Back panel...........................................................................................15

Product label.......................................................................................16

Safety instructions and warnings......................................................17

Chapter 2 Install the Access Point in Your Network and Access It

for Initial Configuration

Position your access point.................................................................21

Set up and connect the access point to your network or Internet

modem.................................................................................................22

Set up the access point with a PoE network connection..........22

Set up the access point with a non-PoE network connection...23

Set up the access point with a connection to your Internet

modem............................................................................................24

Connect to the access point for initial configuration.....................25

Connect over WiFi using the NETGEAR Insight App on an iOS or

Android mobile device.................................................................26

Connect over the Internet using the NETGEAR Insight Cloud

portal...............................................................................................27

Connect over WiFi using a WiFi-enabled computer or mobile

device..............................................................................................29

Connect over Ethernet using a computer connected to the same

network............................................................................................33

Connect over Ethernet using a directly connected computer..37

Chapter 3 Manage the Basic WiFi and Radio Features

Set up and manage WiFi networks..................................................45

Set up an open or secure WiFi network......................................45

View or change the settings of a WiFi network..........................51

Disable or enable a WiFi network or set up a WiFi activity

schedule..........................................................................................52

Remove a WiFi network.................................................................54

Enable or disable client isolation for a WiFi network................55

Hide or broadcast the SSID for a WiFi network..........................56

Enable or disable band steering with 802.11k RRM and 802.11v

WiFi network management..........................................................57

Change the VLAN ID for a WiFi network.....................................58

Enable or disable PMF for a WiFi network..................................59

Enable or disable URL tracking for a WiFi network...................60

Select a MAC ACL for a WiFi network.........................................61

Set bandwidth rate limits for a WiFi network..............................63

Set up and manage captive portals for WiFi networks..................64

Set up a click-through captive portal for a WiFi network..........65

Set up an external captive portal for a WiFi network................67

Set up a Facebook Wi-Fi captive portal for a WiFi network.....73

Unregister the access point from Facebook Wi-Fi....................75

Manage the basic radio features......................................................76

Manage the basic settings for the radios....................................76

Turn a radio on or off.....................................................................80

Change the WiFi mode for a radio..............................................81

Change the MCS index and data rate for a radio......................82

Change the channel width for a radio.........................................83

Change the output power for a radio.........................................85

Change the guard interval for a radio.........................................86

Change the channel for a radio...................................................87

Manage Quality of Service for a WiFi radio................................88

Chapter 4 Manage the Advanced WiFi and Radio Features

Manage the advanced radio features..............................................91

Manage the advanced WiFi settings for the radios...................91

Manage the maximum number of clients for a radio................94

Manage the broadcast and multicast settings for a radio........95

Manage load balancing for the radios........................................97

Set a data volume limit for the access point....................................98

Set up a WiFi bridge between access points................................102

Chapter 5 Manage Access and Security

Block specific URLs and keywords for Internet access................108

Manage local MAC access control lists.........................................110

Manually set up a MAC access control List...............................110

Import an existing MAC access control list..............................114

Manage user accounts.....................................................................117

Add a user account......................................................................117

Change the settings for a user account....................................119

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

Remove a user account...............................................................120

Manage neighbor AP detection.....................................................120

Enable neighbor access point detection and move access points

to the Known AP List....................................................................121

Import an existing neighbor access point list in the Known AP

List..................................................................................................123

Set up RADIUS servers.....................................................................126

Chapter 6 Manage the Local Area Network and IP Settings

Disable the DHCP client and configure a LAN or WAN IP

address..............................................................................................129

AP mode: Disable the DHCP client and specify a fixed IP

address..........................................................................................129

Router mode: Disable the DHCP client and specify a fixed WAN

IP address.....................................................................................131

Router mode: Specify WAN Point-to-Point Protocol over Ethernet

settings..........................................................................................132

Enable the DHCP client...................................................................135

AP mode: Enable the DHCP client............................................135

Router mode: Enable the DHCP client and let the access point

obtain a WAN IP address............................................................136

Set the 802.1Q VLAN and management VLAN............................138

AP mode: Set the 802.1Q VLAN and management VLAN.....138

Router mode: Set the 802.1Q VLAN and management VLAN.140

AP mode only: Specify an existing domain name........................142

Enable or disable Spanning Tree Protocol...................................143

Enable or disable the network integrity check function..............144

Enable or disable IGMP snooping.................................................145

Enable or disable Ethernet LLDP....................................................146

Enable or disable UPnP...................................................................147

Router mode only: Manage DHCP servers...................................148

Manage the default DHCP server..............................................149

Add a DHCP server for a WiFi network.....................................151

View or change the settings for a DHCP server.......................153

Disable a DHCP server................................................................154

Remove a DHCP server...............................................................155

Enable or disable inter-VLAN routing.......................................157

Chapter 7 Manage and Maintain the Access Point

Change the management mode to NETGEAR Insight or

Web-browser....................................................................................160

Change the system mode to Router mode or AP mode.............162

Change the country or region of operation..................................163

Change the admin user account password..................................164

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

Change the system name................................................................165

Specify a custom NTP server...........................................................166

Set the time zone..............................................................................168

Manage the syslog settings.............................................................169

Manage the firmware of the access point.....................................170

Check for new firmware and upgrade the access point.........170

Manually download firmware and upgrade the access point.171

Revert to the backup firmware...................................................173

Use an SFTP server to upgrade the access point....................175

Manage the configuration file of the access point.......................176

Back up the access point configuration....................................176

Restore the access point configuration.....................................178

Reboot the access point from the local browser interface.........179

Schedule the access point to reboot.............................................180

Return the access point to its factory default settings.................181

Use the Reset button to reset the access point........................181

Use the local browser interface to reset the access point......182

Enable or disable Secure Shell.......................................................183

Enable SNMP and manage the SNMP settings............................184

Manage the LEDs.............................................................................186

Chapter 8 Monitor the Access Point and the Network

View the access point Internet, IP, and system settings..............189

View the WiFi radio settings............................................................192

View unknown and known neighbor access points.....................195

View client distribution, connected clients, and client trends....197

View WiFi and WAN traffic, traffic statistics, and channel

utilization...........................................................................................201

View or download tracked URLs.....................................................203

View, save, download, or clear the logs........................................205

View a WiFi bridge connection.......................................................207

View the data volume consumption..............................................208

View alarms and notifications.........................................................209

Chapter 9 Diagnostics and Troubleshooting

Capture WiFi and Ethernet packets...............................................212

Perform a ping test...........................................................................214

Check the Internet speed................................................................216

Quick tips for troubleshooting.......................................................217

Troubleshoot with the LEDs............................................................218

Power LED is off...........................................................................219

Power LED remains solid amber................................................219

Power LED is blinking amber continuously..............................220

Insight LED is off..........................................................................220

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

Andere Handbücher für WAC510

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR WG103 ProSafe Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S Bedienungsanleitung

NETGEAR

NETGEAR WAC124 Bedienungsanleitung

NETGEAR

NETGEAR WAC104 Bedienungsanleitung

NETGEAR

NETGEAR Orbi Pro Satellite Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Premium WNDAP660 Bedienungsanleitung

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Premium WNDAP660 Bedienungsanleitung

NETGEAR

NETGEAR WG602v3 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX630E Bedienungsanleitung

NETGEAR

NETGEAR WAX615-100NAS Bedienungsanleitung

NETGEAR

NETGEAR WAC104 Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR PowerLine XWNB5602 Bedienungsanleitung

NETGEAR

NETGEAR Insight WAC540 Bedienungsanleitung

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Kurzanleitung

NETGEAR

NETGEAR WAC510 Bedienungsanleitung

NETGEAR

NETGEAR WN370 Bedienungsanleitung

NETGEAR

NETGEAR WND930 Bedienungsanleitung

NETGEAR

NETGEAR WG602v4 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Montage- und Wartungsanleitung

NETGEAR

NETGEAR WN604 - Wireless-N 150 Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG602v3 - Wireless Access Point Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung