NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

BETA

December 2005

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

Reference Manual for the

NETGEAR ProSafe

802.11g Wireless Access

Point WG302

v0.1, December 2005

Technical Support

Please register to obtain technical support. Please retain your proof of purchase and warranty

information.

To register your product, get product support or obtain product information and product

documentation, go to http://www.NETGEAR.com. If you do not have access to the World Wide

Web, you may register your product by filling out the registration card and mailing it to

NETGEAR customer service.

You will find technical support information at:

http://www.NETGEAR.com/through the customer service area. If you want to contact technical

support by telephone, see the support information card for the correct telephone number for your

country.

Trademarks

NETGEAR is a registered trademark of NETGEAR, INC. Windows is a registered trademark of Microsoft Corporation.

Other brand and product names are trademarks or registered trademarks of their respective holders. Information is

Statement of Conditions

NOTE: In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the

right to make changes to the products described in this document without notice. NETGEAR does not assume

any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

NOTE: Modifications made to the product, unless expressly approved by Netgear, could void the user’s authority to

operate the equipment. NETGEAR does not assume any liability that may occur due to such condition.

FCC Statement.

Declaration of Conformity

We Netgear,

4500 Great America Parkway

Santa Clara, CA 95054, USA

Tel: +1 408 907 8000

declare under our sole responsibility that the product(s)

WG302 (Model Designation)

802.11g ProSafe Wireless Access Point (Product Name)

complies with Part 15 of FCC Rules.

v0.1, December 2005

iii

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try and correct the interference by one or more of the following measures:

•Reorient or locate the receiving antenna.

• Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Placement and Range Guidelines

Indoors, computers can connect over 802.11 wireless networks at a maximum range of several hundred feet for 802.11b/

g devices. However, the operating distance or range of your wireless connection can vary significantly, based on the

physical placement of the wireless access point.

For best results, identify a location for your wireless access point according to these guidelines:

•Away from potential sources of interference, such as PCs, large metal surfaces, microwaves, and 2.4 GHz cordless

phones.

•In an elevated location such as a high shelf that is near the center of the wireless coverage area for all mobile

devices.

Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to

the wireless access point.

RF Exposure Warning for North America, and Australia

Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below)

must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not

be colocated with other antenna or radio transmitter.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables

when connecting to computer or peripheral devices).

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

 We declare that the product is limited in CH1~CH11 by specified firmware controlled in the USA.

v0.1, December 2005

Please go to www.netgear.com/go/wg102_fcc for an updated list of wireless accessories approved to be used with

the WAG302 in North America and Australia.

Industry Canada Compliance Statement

This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations

ICES 003.

Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur NMB-003.

The device is certified to the requirements of RSS-210 for 2.4 GHz spread spectrum devices. The use of this device in a

system operating either partially or completely outdoors may require the user to obtain a license for the system according

to the Canadian regulations. For further information, contact your local Industry Canada office.

Approved

Antennas

Antenna Gain and

type

Approved Antenna

Cable

Antenna Cable

Length

a. WG302 maximum radiated power in North America and Australia: 19 dBm ñ cable loss + antenna gain

NETGEAR

ANT24D18

14 dBi, directional

outdoor/indoor

NETGEAR ACC-10314-

01 thru 05

30 m

NETGEAR

ANT2409

8.5 dBi,

omnidirectional

outdoor/indoor

NETGEAR ACC-10314-

01 thru 05

NETGEAR

ANT24O5

5 dBi, ceiling/wall

indoor

NETGEAR ACC-10314-

01 thru 05

Antenna Statement for North America and Australia

In addition to its own antenna, the WG302 device has been approved for use with the following detachable antennas and

antenna cables.

IC statement

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate with an antenna having a maximum gain of 4.59352 dBi. Antenna having a

higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must

follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

10 m

v0.1, December 2005

viii

v0.1, December 2005

Contents

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point

WG302

Chapter 1

About This Manual

Audience, Scope, Conventions, and Formats ................................................................1-1

How to Use This Manual ................................................................................................1-2

How to Print this Manual .................................................................................................1-2

Chapter 2

Introduction

About the NETGEAR ProSafe 802.11g Wireless Access Point WG302 ........................2-1

Key Features ..................................................................................................................2-2

AutoCell—The Self-Organizing Wireless Network ...................................................2-4

802.11g Standards-based Wireless Networking ......................................................2-4

Autosensing Ethernet Connections with Auto Uplink ...............................................2-5

Compatible and Related NETGEAR Products .........................................................2-5

System Requirements ....................................................................................................2-6

What’s In the Box? .........................................................................................................2-6

Hardware Description .....................................................................................................2-7

Front Panel ...............................................................................................................2-7

Rear Panel ...............................................................................................................2-8

Chapter 3

Basic Installation and Configuration

Wireless Equipment Placement and Range Guidelines .................................................3-1

Cabling Requirements ..............................................................................................3-2

Default Factory Settings .................................................................................................3-2

Understanding WG302 Wireless Security Options .........................................................3-3

Installing the WG302 Wireless Access Point ..................................................................3-5

Logging in to the WG302 Using Its Default IP Address ..................................................3-9

v0.1, December 2005

Basic IP Settings ..........................................................................................................3-10

Wireless Settings ..........................................................................................................3-11

Security Profiles ............................................................................................................3-13

Before You Change the SSID and WEP Settings ..................................................3-17

Setting up and Testing Basic Wireless Connectivity .....................................................3-18

Configuring the Radius Server Settings .......................................................................3-19

Configuring Network Authentication .............................................................................3-20

Entering WEP Data Encryption Keys ...........................................................................3-21

Restricting Wireless Access by MAC Address .............................................................3-21

Chapter 4

Management

Remote Management .....................................................................................................4-1

Using the Secure Telnet Interface ..................................................................................4-2

How to Use the CLI via the Console Port .................................................................4-2

CLI Commands ........................................................................................................4-3

SNMP Remote Management ..........................................................................................4-3

Viewing the Activity Log ..................................................................................................4-4

Viewing General Information ..........................................................................................4-5

Viewing Statistics ............................................................................................................4-7

Viewing the Available Wireless Station List ....................................................................4-8

Upgrading the Wireless Access Point Firmware ............................................................4-9

Configuration File Management ...................................................................................4-10

Backing up and Restoring the Configuration ..........................................................4-10

Erasing the Configuration .......................................................................................4-11

Using the Reset Button to Restore Factory Default Settings .................................4-11

Changing the Administrator Password .........................................................................4-12

AutoCell Rogue AP Detection ......................................................................................4-13

AutoCell Rogue Station Detection ................................................................................4-14

Chapter 5

Advanced Configuration

Understanding Advanced IP Settings for Wireless Clients .............................................5-1

Configuring Advanced Wireless LAN Settings ...............................................................5-3

AutoCell Overview ....................................................................................................5-3

AutoCell Configuration Options ................................................................................5-5

Auto RF Management ..............................................................................................5-5

Andere Handbücher für WG302 - 802.11g ProSafe Wireless Access...

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR WAX638E Bedienungsanleitung

NETGEAR

NETGEAR EX7000 Bedienungsanleitung

NETGEAR

NETGEAR WAX202 Bedienungsanleitung

NETGEAR

NETGEAR FWG114Pv2 - Wireless Firewall With USB Print... Bedienungsanleitung

NETGEAR

NETGEAR WAG102NA Bedienungsanleitung

NETGEAR

NETGEAR WAC510 Bedienungsanleitung

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

NETGEAR

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR FUSE Technisches Datenblatt

NETGEAR

NETGEAR WN203 Bedienungsanleitung

NETGEAR

NETGEAR WN802T Bedienungsanleitung

NETGEAR

NETGEAR N150 WN604 Bedienungsanleitung

NETGEAR

NETGEAR WAX204 Bedienungsanleitung

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR PowerLEAP WiFi 1000 Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX610 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Premium WNDAP620 Bedienungsanleitung

NETGEAR

NETGEAR WAG302v2 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAC124 Bedienungsanleitung

NETGEAR

NETGEAR AirBridge WBC502 Handbuch

NETGEAR

NETGEAR WG602v3 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung