NETGEAR WNAP210 Bedienungsanleitung

350 East Plumeria Drive

San Jose, CA 95134

USA

December 2011

202-10474-02

1.0

ProSafe Wireless-N Access

Point WNAP210

User Manual

ProSafe Wireless-N Access Point WNAP210

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form or by any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or

for more information about the topics covered in this manual, visit the Support website at:

http://support.netgear.com

Phone (US & Canada only): 1-888-NETGEAR

Phone (Other Countries): Check the list of phone numbers at:

http://support.netgear.com/app/answers/detail/a_id/984

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

without notice. Other brand and product names are registered trademarks or trademarks of their respective

Statement of Conditions

To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes

to the products described in this document without notice. NETGEAR does not assume any liability that may occur

due to the use, or application of, the product(s) or circuit layout(s) described herein.

Contents

Chapter 1 Getting Started

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

What Is In the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Hardware Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Chapter 2 Installation and Configuration

Wireless Equipment Placement and Range Guidelines. . . . . . . . . . . . . . .10

Prepare to Install the Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connect to the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Configure LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Set Basic IP Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

IP Settings Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set Up and Test Basic Wireless Connectivity . . . . . . . . . . . . . . . . . . . . . .15

Basic Wireless Setting Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

QoS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Deploy the Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Wall Mount Kit (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Wireless Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Security Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Profile Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Network Authentication Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

RADIUS Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Change or Edit a Security Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Restrict Wireless Access by MAC Address . . . . . . . . . . . . . . . . . . . . . . . .29

Chapter 3 Management

Change the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Remote Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Remote Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Management Using Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Upgrade the Access Point Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Save or Restore the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Enable the Syslog Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Restore Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

ProSafe Wireless-N Access Point WNAP210

Chapter 4 Monitoring

System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Wireless Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Enable Rogue AP Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Import a Rogue AP List from a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

View and Save AP Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Create AP Lists Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Network Traffic Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Chapter 5 Advanced Configuration

802.1Q VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Untagged VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Management VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Hotspot Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Advanced Wireless Settings Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Advanced QoS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Wireless Bridging and Repeating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Point-to-Point Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Point-to-Multi-Point Wireless Bridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Wireless Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Client Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Chapter 6 Troubleshooting and Debugging

Troubleshooting with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

All LEDs Are Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

LAN LED Is Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

WLAN LED Is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Cannot Connect to the Access Point to Configure It . . . . . . . . . . . . . . . . . 60

Wireless Access to the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Time-Out Error for URL or IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix A Supplemental Information

Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Appendix B Command Line Reference

Command Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Appendix C Notification of Compliance

Index

1. Getting Started

The ProSafe Wireless-N Access Point WNAP210 is the basic building block of a wireless LAN

infrastructure. It provides connectivity between Ethernet wired networks and radio-equipped

wireless computers, wireless devices, print servers, and other devices.

This chapter covers the following topics:

• System Requirements

• What Is In the Box

• Hardware Description

For more information about the topics covered in this manual, visit the support website at

http://support.netgear.com.

Getting Started

ProSafe Wireless-N Access Point WNAP210

System Requirements

Before installing the access point, make sure that your system has the following:

• A 10/100/1000 Mbps local area network device such as a hub or switch

• The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the

package, or one like it

• A 100–120 V, 50–60 Hz AC power source

• A web browser for configuration such as Microsoft Internet Explorer 5.0 or later, or Mozilla

3.0 or later

• At least one computer with the TCP/IP protocol installed

• 802.11b/g- or 802.11b/g-compliant devices

What Is In the Box

The product package should contain the following items:

• ProSafe Wireless-N Access Point WNAP210

• Power adapter and cord (12V DC, 1.0A)

• Straight-through Category 5 Ethernet cable

• Product Installation Guide

• Resource CD, which includes this manual

• Vertical stand feet (2)

• Wall-mount kit made up of brackets (2) and hardware

Contact your reseller or customer support in your area if there are any missing or damaged

parts. Refer to the NETGEAR website at http://kbserver.netgear.com/main.asp for the

telephone number of customer support in your area. You should keep the Product Installation

Guide along with the original packing materials, and use the packing materials to repack the

access point if you need to return it for repair. To qualify for product updates and product

warranty, NETGEAR encourages you to register on the NETGEAR website at

http://my.netgear.com/registration/login.aspx.

Getting Started

ProSafe Wireless-N Access Point WNAP210

Hardware Description

This section describes the front and rear hardware functions of the access point.

Front Panel

The front hardware functions are described in the following figure and table.

Power Test Ethernet WLAN

LAN

Figure 1. Front view

The following table explains the LEDs:

Table 1. Front panel LEDs

LED Description

Power • Off. Power is off.

• On. Power is on.

Test Blinking. The device is running a self-test or is loading software. This LED might blink for

a minute before going off. If it continues to blink, it indicates a system fault.

Ethernet

LAN • Off. A 10 Mbps link or no link is detected.

• Amber. A 10/100 Mbps link is detected.

• Green. A 1000 Mbps link is detected.

WLAN Blinking (blue). Wireless activity has been detected.

Getting Started

ProSafe Wireless-N Access Point WNAP210

Rear Panel

Power Ethernet Restore

Factory

Settings

Figure 2. Rear panel

The access point rear panel functions are described in the following list:

• Power socket. This socket connects to the 12V 1.0A power adapter.

• RJ-45 Ethernet port. Use the Ethernet RJ-45 port to connect to an Ethernet LAN through

a device such as a hub, switch, router, or PoE switch.

• Restore Factory Settings button. This button restores the access point to the factory

default settings.

2. Installation and Configuration

This chapter describes how to set up your access point for wireless connectivity to your LAN.

This basic configuration will enable computers with 802.11b/g/n wireless adapters to connect

to the Internet, or access printers and files on your LAN. This chapter covers the following

topics:

• Wireless Equipment Placement and Range Guidelines

• Prepare to Install the Access Point

• Connect to the Access Point

• Log In to the Access Point

• Configure LAN Settings

• Set Basic IP Options

• Set Up and Test Basic Wireless Connectivity

• QoS Settings

• Deploy the Access Point

• Wireless Security Options

• Security Profiles

• Restrict Wireless Access by MAC Address

You need to prepare these three things before you can establish a connection through your

wireless access point:

• A location for the access point that conforms to the guidelines in the following section,

Wireless Equipment Placement and Range Guidelines on page 10.

• The wireless access point connected to your LAN through a device such as a hub,

switch, router, or cable or DSL gateway.

• One or more computers with correctly configured 802.11b/g/n wireless adapters.

Installation and Configuration

ProSafe Wireless-N Access Point WNAP210

Wireless Equipment Placement and Range Guidelines

The operating distance or range of your wireless connection can vary significantly based on

the physical placement of the access point. The latency, data throughput performance, and

notebook power consumption of wireless adapters also vary depending on your configuration

choices.

Note: Failure to follow these guidelines can result in significant

performance degradation or inability to wirelessly connect to the

access point. For complete performance specifications, see

Appendix A, Supplemental Information.

For best results, place your access point:

• Near the center of the area in which your computers and wireless devices operate.

• In an elevated location such as a high shelf where the wirelessly connected PCs have

line-of-sight access (even if through walls).

• Away from sources of interference, such as computers, microwaves, and 2.4 GHz

cordless phones.

• Away from large metal surfaces.

A wall-mount kit is provided with your access point. For installation instructions, see Wall

Mount Kit (Optional) on page 19.

If using multiple access points, it is better if adjacent access points use different radio

frequency channels to reduce interference. The recommended channel spacing between

adjacent access points is five channels (for example, use Channels 1 and 6, or 6 and 11).

The time it takes to establish a wireless connection can vary depending on both your security

settings and placement. Some types of security connections can take slightly longer to

establish and can consume more battery power on a notebook computer.

Prepare to Install the Access Point

Before installing the access point, you should make sure that your Ethernet network is up and

working. You will be connecting the access point to the Ethernet network so that computers

with 802.11b/g/n wireless adapters will be able to communicate with computers on the

Ethernet network. For this to work correctly, you should verify that you have met all of the

system requirements, shown in System Requirements on page 6.

Andere Handbücher für WNAP210

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR ProSAFE WN203-200PES Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE WNDAP380R Bedienungsanleitung

NETGEAR

NETGEAR WN802T Bedienungsanleitung

NETGEAR

NETGEAR HE102 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAC730 Bedienungsanleitung

NETGEAR

NETGEAR WAX615 Bedienungsanleitung

NETGEAR

NETGEAR WN604 - Wireless-N 150 Access Point Bedienungsanleitung

NETGEAR

NETGEAR WPN802 Bedienungsanleitung

NETGEAR

NETGEAR WAG302v2 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNDAP330 Bedienungsanleitung

NETGEAR

NETGEAR WAC104 Bedienungsanleitung

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Montageanleitung

NETGEAR

NETGEAR ProSafe WG102-500 Bedienungsanleitung

NETGEAR

NETGEAR WAG302v1 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Kurzanleitung

NETGEAR

NETGEAR WAC510 Bedienungsanleitung

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR Orbi Pro Satellite Bedienungsanleitung

NETGEAR

NETGEAR WN370 Bedienungsanleitung

NETGEAR

NETGEAR WN802T Bedienungsanleitung

NETGEAR

NETGEAR WNAP210 Bedienungsanleitung

NETGEAR

NETGEAR WAG102 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WiFi 6 AX1800 Bedienungsanleitung

NETGEAR

NETGEAR WG602v3 - Wireless Access Point Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung