NETGEAR WNTR2001 Bedienungsanleitung

350 East Plumeria Drive

San Jose, CA 95134

USA

May 2011

202-10822-01

v1.0

Wireless Access Point

(WNTR2001)

User Manual

Wireless Travel Router WNTR2001

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form or by any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online,

visit us at http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR

Phone (Other Countries): See Support information card.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc.and/or its subsidiaries in the United States and/or other countries. Information is subject to change

without notice. Information is subject to change without notice. Other brand and product names are registered

trademarks or trademarks of their respective holders.

Statement of Conditions

To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes

to the products described in this document without notice. NETGEAR does not assume any liability that may occur

due to the use, or application of, the product(s) or circuit layout(s) described herein.

Contents |3

Table of Contents

Chapter 1 Getting Started

Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Top Panel with LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Power Connection Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Preparing to Change Your Internet Adapter Settings. . . . . . . . . . . . . . . . . . 6

Using the Smart Wizard to Change the Setup . . . . . . . . . . . . . . . . . . . . . . .8

Chapter 2 Advanced Settings

Device Status Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Show Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

DHCP Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Managing Your Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Backing Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Restoring Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Erasing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Upgrading the Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Using Push 'N' Connect (WPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Chapter 3 Troubleshooting

Using the USB Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Connecting to http://www.mywifiext.net . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Connecting to Wireless Networks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Appendix A Factory Settings and Technical Specifications

Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Appendix B Related Documents

Appendix C Notification of Compliance

Chapter 1. Getting Started |4

1. Getting Started

Hardware Features

Top Panel with LEDs

Top Panel LED Activity

Power • Solid green: Unit is powered on and operating

normally.

• Solid or blinking amber: Unit is busy.

• Solid red: Power source does not provide enough

power.

• Off: Unit is not powered on.

LAN • On: The Ethernet cable is connected.

• Off: No Ethernet cable is connected.

WLAN • Green: The connection to the router is excellent.

• Amber: The connection to the router is good.

• Red: The connection to the router is poor.

• Off: No wireless connection.

Rear Panel

Ethernet port

Power

Reset WPS

button

Figure 1. Rear panel

Chapter 1. Getting Started |5

Wireless Travel Router WNTR2001

Power Connection Options

Depending on the cable that you received with your product, you might need a plug converter

to connect the wireless access point to the power adapter. If it is needed, the plug converter

is included in the box.

Figure 2. Plug converter

You can power on your wireless access point using either of these methods:

• Method 1: Connect the wireless access point to an electrical outlet with the included

power adapter.

Figure 3. Power adapter

• Method 2: Connect the wireless access point to a USB port on a nearby computer or

device with the USB power cable:

Figure 4. USB power cable

Make sure that the device where you connect the USB power cable is powered on. Some

USB ports on consumer electronic devices cannot provide the power that the wireless

access point requires. In such cases, the power LED turns solid red and the wireless

access point may reset itself or turn itself off. If this happens, try connecting the USB

cable to a different device, or use the wireless access point power adapter instead.

6|Chapter 1. Getting Started

Wireless Travel Router WNTR2001

Installation

The Wireless Access Point (WNTR2001) Installation Guide included in the package, explains

how to install your wireless access point. The steps are summarized in this section.

1. You use a computer to set up the wireless access point. During setup, make sure that

your computer is not connected to a router. You can restore the connection after the

wireless access point installation is complete.

• Disconnect the Ethernet cable from your computer if you use it for a wired network

connection.

• If your computer is wirelessly connected to a network, stop your wireless connection.

2. Connect the wireless access point.

• Use an Ethernet cable (included) to connect the wireless access point to your

computer.

• Use either the USB power cable or the power adapter to provide power to the wireless

access point. (See Power Connection Options on page 5.)

3. Open your Internet browser. It automatically displays the setup page. Follow the instructions

on the setup page.

4. Disconnect the Ethernet and USB cables from your computer.

5. Connect the wireless access point to your TV, Box, or Blu-ray player.

If your device doesn’t have a USB port, then use the power adapter cable that came with

your wireless access point and plug it into an electrical outlet.

6. Congratulations! Your installation is complete. You can return your computer to its usual set

up and begin using the wireless access point.

Preparing to Change Your Travel Router Settings

If you want to change the settings for the wireless access point after installation, then you

need to connect it to a computer while you are making changes.

1. Connect your wireless access point to a computer with an Ethernet cable.

2. Connect either the USB power cable or the power adapter cable that came in the product

package to the rear panel of your wireless access point.

Chapter 1. Getting Started |7

Wireless Travel Router WNTR2001

To supply power to your wireless access point, use whichever method is more convenient

for you. See Power Connection Options on page 5.

Figure 5. Connecting the wireless access point to a laptop

3. Launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer. In the

address field, enter http://www.mywifiext.net.

Unless you changed the settings on the Firmware Upgrade screen (see Upgrading the

Firmware on page 15), the software automatically checks for new firmware at the

NETGEAR website. Then the following screen displays:

The Device Status screen shows what the current settings are for the wireless access

point. A menu in the left pane allows you to view or change the settings.

8|Chapter 1. Getting Started

Wireless Travel Router WNTR2001

Using the Smart Wizard to Change the Setup

The Smart Wizard helps you set up your wireless access point. For information about

advanced configuration, see Chapter 2, Advanced Settings.

The Wireless Access Point (WNTR2001) Installation Guide included in the package, explains

how to install your wireless access point. During installation, when you launch your Internet

browser, the Smart Wizard automatically displays.

After installation, to use the Smart Wizard again:

1. Connect the wireless access point to a computer and go to http://www.mywifiext.net as

described in Preparing to Change Your Travel Router Settings on page 6.

2. From the menu on the left, select Setup Wizard. The following screen displays:

This is the same Smart Wizard that displays during installation as described in the

Installation Guide.

3. You can select a network from the list, or select the Manually input my wireless SSID

radio button. Click Continue. When you have chosen the network that you want to join, the

next wizard screen displays. Follow the onscreen prompts to connect to a wireless network:

4. When the Review Settings screen displays, click Finish. If you are done making changes,

disconnect your wireless access point from your computer, and reconnect it to the device on

which you want to use it.

Chapter 2. Advanced Settings |9

2. Advanced Settings

To change advanced settings, connect the Travel router to your computer and use your Internet

browser to go to http://www.mywifiext.net as described in Preparing to Change Your Travel

Router Settings on page 6.

Device Status Screen

When you connect to http:/www.mywifiext.net, after the automatic firmware check, the

Device Status screen displays:

This screen shows the current settings and the status of your Travel router.

• You can click Show Statistics to see device performance statistics such as the number

of packets sent and number of packets received for each port. See Show Statistics on

page 11.

• Click DHCP Status to see information about your current DHCP connection. See DHCP

Connection Status on page 12.

• The following table describes the fields in the Device Status screen.

Table 1. Device Status Settings

Field Description

Device Status Hardware Version The hardware version of the Travel router.

Firmware Version The current firmware version of the Travel router. If

you upgrade the firmware, this field changes.

GUI Language Version The language version running on the Travel router. If

you upgrade the firmware, this field changes.

Wireless Connection

Status

Wireless Connection The status of your wireless connection (connected or

disconnected).

Link Rate The actual transmission (Tx) and receive (Rx) link

rate in the current wireless connection

Name (SSID) Your Travel router is set up to connect to this SSID,

also called the wireless name.

Region The location of the Travel router.

Channel The wireless channel of the network.

Security Type The security setting for the wireless network.

LAN Port MAC Address The physical address of the Travel router, as seen

from the local area network (LAN).

IP Address The IP address of the Travel router. The default is

192.168.1.251.

DHCP Server Identifies the network DHCP server on the wireless

network.

IP Subnet Mask The IP subnet mask associated with the LAN IP

address of the Travel router. The default is

255.255.255.0.

Gateway IP Address The IP address of the wireless network gateway.

DNS Server The IP address of the Domain Name Server (DNS)

of the wireless network.

10 |Chapter 2. Advanced Settings

Wireless Travel Router WNTR2001

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX618 Bedienungsanleitung

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR Orbi Pro Satellite Bedienungsanleitung

NETGEAR

NETGEAR WN802T Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG602v4 - Wireless Access Point Handbuch

NETGEAR

NETGEAR WN203 Bedienungsanleitung

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Montageanleitung

NETGEAR

NETGEAR WND930 Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAC505 Bedienungsanleitung

NETGEAR

NETGEAR WG103 ProSafe Bedienungsanleitung

NETGEAR

NETGEAR WAX204 Bedienungsanleitung

NETGEAR

NETGEAR WAC120 Bedienungsanleitung

NETGEAR

NETGEAR WAC505 Bedienungsanleitung

NETGEAR

NETGEAR WAX214v2 Bedienungsanleitung

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Montageanleitung

NETGEAR

NETGEAR WG602NA Bedienungsanleitung

NETGEAR

NETGEAR WG602v4 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR Insight WAC540 Bedienungsanleitung

NETGEAR

NETGEAR WiFi 6 AX1800 Bedienungsanleitung

NETGEAR

NETGEAR WAC730 Bedienungsanleitung

NETGEAR

NETGEAR WAX204 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung