Netstor NA341TB3 Bedienungsanleitung
Second edition, Mar. 2019
User Manual
NA341TB3
Rackmount 2U 8 bay (3.5"/ 2.5") Thunderbolt™ 3 RAID Storage
1. Unpack the NA341TB3
2. Storage Enclosure Description
3
3
5. Verification 10
6. Thunderbolt 3 Card LEDs Status 17
4. Power On/Off NA341TB3 9
3
2.1 Panel Layout
5
2.2 Environmental Control Board LED Status
3. Setup Procedure 6
6
3.1 Storage Setup
8
3.2 Blower Fan Speed Adjustment
10
5.1 macOS
13
5.2 Windows Operating System
3Go Top ↑
1. Unpack the NA341TB3
2. Storage Enclosure Description
2.1 Panel Layout
The box contains the following items:
。Netstor NA341TB3 storage
。HDD tray × 8 (installed in enclosure)
。Thunderbolt 3 cable (2 meters) × 1
。Power cord × 1
。HDD mounting screws
。Key for HDD tray × 2
1. HDD Power LED
。White - Power On Indicator
4. Fan LED
。Green – normal
。Red – fan failure (low frequency of RPM or stop)
5. Temperature LED
。Green – normal
。Red – over temperature
3. Mute Button
。Mute Buzzer Beeping
2. HDD Status LED
。Flash Blue - HDD Accessing Indicator
。Red - HDD Failure Indicator
4Go Top ↑
8. Hot-Swappable Blower Fan 1
。75 × 75 × 28 mm
9. Hot-Swappable Blower Fan 2
。75 × 75 × 28 mm
10. Inner Cooling Fan 3
。60 × 60 × 25 mm
11. Inner Cooling Fan 4
。60 × 60 × 25 mm
12. Thunderbolt 3 Connectors
。Connecting Thunderbolt 3 cables to host
and downstream device
6. Power Cord Receptacle
7. PSU Power Switch
13. Thumbscrews to loosen/
tighten the top cover
5Go Top ↑
2.2 Environmental Control Board LED Status
D2 LED: fan failure indicator
。D2 LED no light: all cooling fans are normal
。D2 LED red light: one of the fans fails
D4 LED: fan 1 status
。D4 LED no light: fan 1 is normal
。D4 LED red light: fan 1 fails
D5 LED: fan 2 status
。D5 LED no light: fan 2 is normal
。D5 LED red light: fan 2 fails
D6 LED: fan 3 status
。D6 LED no light: fan 3 is normal
。D6 LED red light: fan 3 fails
D7 LED: fan 4 status
。D7 LED no light: fan 4 is normal
。D7 LED red light: fan 4 fails
6Go Top ↑
3. Setup Procedure
3.1 Storage Setup
1. Place NA341TB3 storage on a level surface on a stable table.
2. Take out all the eight HDD trays.
7Go Top ↑
3. Place HDDs in the trays and fix them with the included hard drive mounting
screws. And then put the trays with HDDs back to NA341TB3 storage.
4. Connect NA341TB3 and Thunderbolt 3 computer with Thunderbolt cable,
and then connect Netstor storage with power source.
Host
Power
8Go Top ↑
3.2 Blower Fan Speed Adjustment
1. There are two hot-swappable 75×75×28 mm blower fans for ventilation at rear of NA341TB3.
After loosening the two thumbscrews on the fan module, the blower fan can be pulled out of
the storage enclosure.
2. The rear 75×75×28 mm blower fan speed can be adjusted. As the blower fan module is
pulled out, there are four sets of jumpers labeled with 6V, 8V, 10V, 12V from top to
bottom on the fan connector board. The default setting is the jumper being placed over
pin 7 and 8 for label 6V for slowest speed. The speed increases from label 8V to label 12V.
As jumper is not placed over pins, the fan will spin at 12V full speed.
6V
8V
10V
12V
9Go Top ↑
4. Power On/Off NA341TB3
1. NA341TB3 storage is designed to be powered on/off simultaneously with
the Thunderbolt 3 computer as NA341TB3 is connected to computer by
Thunderbolt cable. Therefore, power on computer first, and then NA341TB3
will be powered on automatically.
2. As NA341TB3 storage is connected to computer by Thunderbolt cable, when
shutting down computer, the NA341TB3 will be shut down automatically as well.
※ NA341TB3 supports hot-plug and hot-unplug for powering on and off.
※ If there is a PSU power switch on Netstor storage, remember to switch it
to “I” position to enable the PSU first.
10 Go Top ↑
5. Verification
5.1 macOS
1. Verify Netstor NA341TB3 is recognized by computer. Click Apple icon at the top
menu bar, select About This Mac, and click System Report button. Click Thunderbolt
in the left column, as NA341TB3 appears in the information, it means Netstor storage
is recognized correctly by computer.
2. Verify RAID controller of NA341TB3. Right after the above point 1, click PCI in the left column,
and information about NA341TB3 RAID controller will appear. (For RAID controller, from starting
up, it will take more time for its info to be shown)
Inhaltsverzeichnis
Andere Netstor Gehäuse Handbücher
Netstor
Netstor TurboBox Xtreme NA265A Bedienungsanleitung
Netstor
Netstor NS722TB3 Bedienungsanleitung
Netstor
Netstor NS385S-8028 Bedienungsanleitung
Netstor
Netstor NA333A-G3 Bedienungsanleitung
Netstor
Netstor NS780S-G3 Bedienungsanleitung
Netstor
Netstor 6Gb/s SAS JBOD Bedienungsanleitung
Netstor
Netstor NA211TB Bedienungsanleitung
Netstor
Netstor NA341A Bedienungsanleitung
Netstor
Netstor NS780TB3 Bedienungsanleitung
Netstor
Netstor TurboBox Pro NA250A Bedienungsanleitung
