Netstor NC430C Bedienungsanleitung

- 0 -

Mini-2Bay RAID Subsystem,

(RAID 0,1 selectable)

w/ combo 1*USB 2.0 Connector

and 1*eSATA (SATAII shielding) Connector

User’s Manual

- 1 -

Features:

*Aluminum housing, anodized surface, benefits for cooling and durability

* Small, compact, and light weight

*Backplane design for two removable SATA drive trays

*Built-in thermo speed control fan for self-contained ventilation

*Individual key lock of each HDD tray for physical security

*LED indicators on each HDD tray, support HDD activity, HDD fail, RAID Level,

FAN/TEMP (environmental monitoring)

*Built-in microprocessor for hardware RAID 0, 1 (selectable)

*Built-in buzzer alarm

*Support RAID 1 mode capability of Hot-Swap, AUTO rebuilding

Descriptions:

External Dual 3.5” HDD Enclosure support Hardware RAID, Host Interface support

USB 2.0 and Serial ATA.

Specifications:

Host Interface USB2.0 and SATAII

HDD Interface SATA I, II

Data Transfer

Rate

USB 2.0 480Mbps ( 60MB/sec )

SATA 1.5/3.0 Gbps

RAID Level Hardware RAID 0 , 1 (selectable)

Hot-Swap Both on Host and Device (RAID 1 only )

LED Display

1. LED for RAID

RAID 0-->orange

RAID 1-->green

2.LED for FAN/TEMP detect

Normal-->green

Fan failure-->red

Over temperature-->orange

3.LED for each HDD

Access-->blue

Fail-->red

Rebuilding-->pink/blue flashing

1. Product Overview

- 2 -

Alarm Buzzer beeping when any event occur

Temperature too high (over 50°C), Fan fail and HDD Fail

Environment

Management

Thermo Detect.- threshold temperature is 50℃

Fan Detect – Fan speed too low or fan stop

Fan speed control according to detected temperature

HDD status detect

Power Supply External Power Adapter (AC input:100-240V~1.0A 50-60Hz /

DC output:+5V/2A,+12V/2A)

Cooling

4.0 x 4.0 x 1.0 mm cooling Fan with FAN speed control

(If temperature goes up, fan will turn faster for better

self-ventilation.)

O.S. support OS independent

Dimension Enclosure only: (L):23.5cm (W):6.5cm (H):12cm

Including Stand: (L):26.9cm (W):8.7cm (H):14.1cm

Material Plastic and Aluminum alloy

Package Content:

- Enclosure x 1

- Stand x 1

- HDD Tray x 2

- USB2.0 Cable x 1

- SATAII Shielding x Cable x 1

- Power Adapter w/ Power Cord x 1

- Hard Disk Drive mounting screw x 8

- Key for HDD tray x 2

- 3 -

2. Quick Installation Guide

a. Connect USB cable from host to USB port; or, connect SATA cable

from host to eSATA port.

b. Connect power cord from power adapter to DC power receptacle.

c. Select RAID level, RAID 0(striping) or RAID1(mirroring).

d. Turn on power switch, then you can start playing this unit.

USB Port Power Switch

DC Power Receptacle

RAID Switch

eSATA Port

RS-232 Port

- 4 -

3. RAID Level Re-configuration

For re-configuring the RAID microprocessor, please

1. Change RAID level

2. Turn off power

3. Turn on power

※CAUTION: After changing the RAID level, HDDs will be

reconfigured on restarting the device.

4. AUTO-Rebuilding / Hard-Copy – RAID 1 support only

Auto rebuilding can be applied for data security, which ensures the

data recover with AUTO rebuilding function, Hot-Copy features HDD

duplicating with or without host connection.

For hot-swapping,

1. Remove one HDD from any of equipped subsystem without

shutting down the Operating System.

2. Keep accessing with the HDD left, you’d hear the buzzer beeping

due to the missing HDD.

3. Re-plug the removed HDD, then buzzer will stop beeping and you’ll

see the LED for HDD flashing while AUTO rebuilding.

For duplicating data to another disk,

1. Ensure the subsystem is under RAID 1 mode.

2. Ensure which HDD contains complete data and plug the HDD into

any bay of it first, before or after powering on.

3. Ensure the firstly installed HDD has been recognized by

subsystem – the firstly installed HDD will be regarded as SOURCE.

Meanwhile, you’d hear the buzzer beeping due to the missing HDD.

4. Plug another HDD into another drive bay - the newly installed HDD

will be regarded as DESTINATION

Then buzzer will stop beeping and you’ll see the LED for HDD

flashing while data duplicating.

- 5 -

5. Frequently Asked Questions

Q: Why RAID 0 works well, but RAID 1 seems not work?

A: Please reconfigure the RAID chip – just refer to RAID Level

Reconfiguration.

Q: Why RAID 1 works well, but RAID 0 seems not work?

A: Please reconfigure the RAID chip – just refer to RAID Level

Reconfiguration.

Q: Why does the Buzzer keep beeping?

A: Please refer to LED Display of Product Overview to check:

1) if the fan/tempt error,

the environment might be too hot, or you’ve run the

subsystem too long.

Æplease try to make your environment cooler or let your

subsystem take a short rest

higher rpm (i.e. Western Digital Raptor 10K rpm) or

various brand HDDs may create more heat inside

enclosure

Æaccording to our internal test, Seagate HDDs are less hot

2) if HDD fail, under RAID 1 mode

you may just swap one HDD,

Æplease plug another HDD ASAP

※Caution: only RAID1 mode can support hotswap, the

subsystem will start AUTO rebuilding after re-plugging

the removed HDD

Or, one HDD may fail,

Æplease replace your HDD

※Caution: only RAID1 mode can support hotswap, the

subsystem will start AUTO rebuilding after re-placing

HDD

3) if HDD fail, under RAID 0 mode

you may just swap one HDD, or one HDD may fail,

Æunfortunately, we have to inform you the RAID volume

just crashed, just kiss your data goodbye.

※Caution: RAID0 mode can’t support hotswap, HDD

fail or swap the HDD may cause data destroyed

Q: If powering off during AUTO rebuilding will it start from beginning

or continue from the last track?

A: Continue from the last track.

Inhaltsverzeichnis

Andere Netstor Netzwerkspeicherserver Handbücher

Netstor

Netstor NA762TB3 Bedienungsanleitung

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Seagate

Seagate U10 ST320423A Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung