Netvox R311A Bedienungsanleitung

Model：R311A

Wireless Window Door Sensor

Window/Door Sensor

User Manual

Table of Content

1. Introduction................................................................................................................................................................ 2

2. Appearance................................................................................................................................................................. 3

3. Main Features............................................................................................................................................................. 3

4.Set up Instruction.........................................................................................................................................................4

4.1 Power on and Turn on / off...............................................................................................................................4

4.2 Join Into Lora Network.................................................................................................................................... 4

4.3 Function Key.................................................................................................................................................... 4

4.4 Data Report.......................................................................................................................................................4

5. Restore to Factory Setting.......................................................................................................................................... 5

6. Sleeping Mode............................................................................................................................................................5

7. Low Voltage Alarming............................................................................................................................................... 6

8. MyDevices Dashboard Interface Demonstration.......................................................................................................6

9. Installation.................................................................................................................................................................. 6

10. Important Maintenance Instruction.......................................................................................................................... 7

1. Introduction

R311A is a long-distance window/door sensor based on the LoRaWAN open protocol (Class A).

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

This device has been certified by the LoRa Alliance and is allowed to use the following logo on the

product:

2. Appearance

3. Main Features

Compatible with LoRaWAN

2 section 3V CR2450 button battery powered

Report voltage status, window/door status

Easy set up and installation

Indicator

Magnet

Base

Function Key

4.Set up Instruction

4.1 Power on and Turn on / off

(1) Power on = Insert batteries: open the battery cover (users may need a flat blade screwdriver to

open); insert two sections of 3V CR2450 button batteries and close the battery cover.

(2) Turn on. If the device had never joined in any network or at factory setting mode, after powering

on, the device is at off mode by default setting. Press function key and release to turn on the device.

The green and red indicator will flash once to show that R311A is turned on.

(3) Turn off. Press and hold function key for 5 seconds till the green indicator flashes quickly and

release. The green indicator will flash 20 times to show that R311A is turned off.

(4) Remove batteries (power off) when R311A is on. Wait till 10 seconds after the capacitance

discharging. Insert batteries again, R311A will be setted to be on mode by default. There is not need

to press function key to turn on the device. The red and green indicators will both flash and then

light off.

Note:

1. The interval between turning on/off or powering off/on is suggested to be about 10 seconds to

avoid the interference of capacitor inductance and other energy storage components.

2. Do not press function key and insert batteries in the same time, otherwise, it will enter engineer

testing mode.

4.2 Join Into Lora Network

To join R311A into LoRa network to communicate with LoRa gateway.

The network operation is as following:

(1) If R311A had never joined any network or at factory setting mode, turn on the device; it will

search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it

joins into the network, otherwise, the green indicator does not work.

(2) If R311A had been joined into a LoRa network, remove and insert the batteries; the green

indicator will stay on for 5 seconds to show it joins into the network.

4.3 Function Key

(1) Press and hold function key for 5 seconds to reset to factory setting. After restoring to

factory setting successfully, the green indicator will flashes quickly 20 times.

(2) Press function key; the green indicator will flash once and the device will send a data report.

4.4 Data Report

When the device is turned on, it will immediately send a version package.

The transmission frequency of sending version package is once every 24 hours.

Data will be reported once per hour by default setting.

Maximum time: 3600s

Minimum time: 3600s (Detect the current voltage value every 3600s by default setting)

Default reportchange:

Battery ---- 0x01 (0.1V)

R311A sensor is triggered:

When the R311A status changes, it will send warning report.

Window/Door sensor open:1

Window/Door sensor close:0

Note: MinInterval is the sampling period for the Sensor. Sampling period >= MinInterval.

Data report configuration and sending period are as following:

5. Restore to Factory Setting

R311A saves data including network key information, configuration information, etc. To restore to

factory setting, users need to execute below operations.

1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LED

flashes quickly 20 times.

2. R311A will be turned off mode after restoring to factory setting.

6. Sleeping Mode

R311A is designed to enter sleeping mode for power-saving in some situations:

(A) While the device is in the network → the sleeping period is one hour. (During this period,

if the reportchange is larger than setting value, it will wake up and send a data report).

(B) When it is not in the network → R311A will enter sleeping mode and wake up every 15

seconds to search a network to join in the first two minutes. After two minutes, it will wake up

every 15 minutes to request to join the network.

If it’s at (B) status, to prevent this unwanted power consumption, we recommend that users

Min Interval

(Unit:second)

Max Interval

(Unit:second)

Reportable

Change

Current Change≥

Reportable Change

Current Change ＜

Reportable Change

Any number

between 1~65535

Any number

between 1~65535 Can not be 0. Report

per Min Interval

Report

per Max Interval

remove the batteries to power off the device.

7. Low Voltage Alarming

The operating voltage threshold is 2.4V. If the voltage is lower than 2.4V, R311A will send a

low-power report to the Lora network.

8. MyDevices Dashboard Interface Demonstration

9. Installation

(1) This product does not have a waterproof function. After the screening is completed, please place

it indoors.

(2) The door magnetic magnet part and the body part are installed on both sides of the door joint or

the window joint, and the distance between the two needs to be less than 2cm; the dust in the

installation position of the equipment needs to be wiped clean and then affixed to the equipment.

(3) The battery installation method is shown in the figure below (battery with "+" facing outward).

Note: To install the battery, use a screwdriver or similar tool to assist in opening the battery cover.

10. Important Maintenance Instruction

The OEM integrator has to be aware of not to providing information to end users regarding how to install or

remove this RF module in the user manual of the end product.The user manual which is provided by OEM

integrators for end users must

Include the following information in a prominent location.

“ To comply with FCC RF exposure compliance requirement, the antenna user for this transmitter must be

installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating

in conjunction with any other antenna or transmitter .”

Label for the end product must include “Contains FCC ID :NRH-ZB-Z100B”or “A RF transmitter inside,FCC

ID :NRH-ZB-Z100B”.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance

could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is to the following two conditions:(1)this device

may not cause harmful interference and (2)this device must accept any interference received, including interference

that may cause undesired operation.

FCC RF Radiation Exposure Statement:

1This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and

your body.

Andere Handbücher für R311A

Inhaltsverzeichnis

Andere netvox Sicherheitssensor Handbücher

netvox

netvox R313W Bedienungsanleitung

netvox

netvox R718WB2 Bedienungsanleitung

netvox

netvox R718WB2 Bedienungsanleitung

netvox

netvox R718B Bedienungsanleitung

netvox

netvox ZB11C Bedienungsanleitung

netvox

netvox R313WA Bedienungsanleitung

netvox

netvox R718WBA Bedienungsanleitung

netvox

netvox RA0708 Bedienungsanleitung

netvox

netvox R718WA Bedienungsanleitung

netvox

netvox S31502 Bedienungsanleitung

netvox

netvox R313FC Bedienungsanleitung

netvox

netvox R718WB2 Bedienungsanleitung

netvox

netvox R718WA2 Bedienungsanleitung

netvox

netvox R313CB Bedienungsanleitung

netvox

netvox R718PA9 Bedienungsanleitung

netvox

netvox R719A Bedienungsanleitung

netvox

netvox RA02A Bedienungsanleitung

netvox

netvox RA08D Series Bedienungsanleitung

netvox

netvox R718WB Bedienungsanleitung

netvox

netvox ZB11D Bedienungsanleitung

netvox

netvox R718B Bedienungsanleitung

netvox

netvox R313WA Bedienungsanleitung

netvox

netvox R313A Bedienungsanleitung

netvox

netvox Z801TXB Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

netvox R311A Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken