Netvox R718WB2 Bedienungsanleitung

Model：R718WB2

Wireless 2-Gang Water Leak Detector with Rope Sensor

Wireless 2-Gang Water Leak Detector

with Rope Sensor

R718WB2 User Manual

Table of Content

1. Introduction................................................................................................................................................................ 2

2. Appearance................................................................................................................................................................. 3

3. Main Features.............................................................................................................................................................4

4.Set up Instruction........................................................................................................................................................ 4

4.1 Power on and Turn on / off.............................................................................................................................. 4

4.2 Join Into Lora Network.................................................................................................................................... 4

4.3 Function Key....................................................................................................................................................4

4.4 Data Report...................................................................................................................................................... 5

5. Restore to Factory Setting..........................................................................................................................................5

6. Sleeping Mode............................................................................................................................................................6

7. Low Voltage Alarming............................................................................................................................................... 6

8. Installation method.....................................................................................................................................................6

9. Important Maintenance Instruction............................................................................................................................7

1. Introduction

R718WB2 is a LoRaWAN device compatible with LoRaWAN protocol (ClassA). When the

R718WB2 water rope sensor detects a leak, it will send an alarm message to the gateway. When the

water rope sensor detects no leaks, it will send a message that shows no leak to the gateway.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

2. Appearance

3. Main Features

Compatible with LoRaWANTM

2 section 3.6V ER14505 button battery powered

Report voltage and two water rope sensor status

Easy set up and installation

4.Set up Instruction

4.1 Power on and Turn on / off

(1) Power on = Insert batteries: open the battery cover (users may need a flat blade screwdriver to

open); insert two sections of 3.6V ER14505 button batteries and close the battery cover.

(2) If the device had never joined in any network or at factory setting mode, after powering on, the

device is at off mode by default setting. Press any function key and release to turn on the device. The

green indicator will flash once to show that R718WB2 is turned on.

(3) Press and hold both function keys for 5 seconds till the green indicator flashes quickly and

release. The green indicator will flash 20 times to show that R718WB2 is turned off.

Note: the interval between shutting down twice or power off/on is suggested to be about 10 seconds

to avoid the interference of capacitor inductance and other energy storage components.

4.2 Join Into Lora Network

To join R718WB2 into LoRa network to communicate with LoRa gateway.

The network operation is as following:

(1) If R718WB2 had never joined any network or at factory setting mode, turn on the device; it will

search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it

joins into the network, otherwise, the green indicator will be off.

(2) If R718WB2 had been joined into a LoRa network, remove and insert the batteries; the green

indicator will stay on for 5 seconds to show it joins into the network.

4.3 Function Key

(1) Press and hold both function keys for 5 seconds to reset to factory setting. After restoring to

factory setting successfully, the green indicator will flashes quickly 20 times.

(2) Press any function key to turn on the device; the green indicator flashes once and it will send a

data report.

4.4 Data Report

When the device is turned on, it will immediately send a version package and a data report of water

leakages/voltage.

Data will be reported once per hour by default setting.

Maximum time: 3600s

Minimum time: 3600s

Default reportchange:

Battery ---- 0x01 (0.1V)

R718WB2 sensor is triggered:

When the R718WB2 status changes, it will send warning report.

No water leak:0

Water leak:1

Data report configuration and sending period are as following:

5. Restore to Factory Setting

R718WB2 saves data including network key information, configuration information, etc. To restore

to factory setting, users need to execute below operations.

1. Press and hold both function keys for 5 seconds till the green indicator flashes and then release;

LED flashes quickly 20 times.

2. R718WB2 is at off mode by default after restoring to factory setting.

Note: The device operation of turning off is the same as the device restore factory settings.

Min Interval

(Unit:second)

Max Interval

(Unit:second)

Reportable

Change

Current Change≥

Reportable Change

Current Change ＜

Reportable Change

Any number

between 1~65535

Any number

between 1~65535 Can not be 0. Report

per Min Interval

Report

per Max Interval

6. Sleeping Mode

R718WB2 is designed to enter sleeping mode for power-saving in some situations:

(A) While the device is in the network → the sleeping period is Min Interval. (During this

period, if the reportchange is larger than setting value, it will wake up and send a data report).

(B) When it is not in the network → R718WB2 will enter sleeping mode and wake up every

15 seconds to search a network to join in the first two minutes. After two minutes, it will wake

up every 15 minutes to request to join the network.

If it’s at (B) status, to prevent this unwanted power consumption, we recommend that users

remove the batteries to power off the device.

7. Low Voltage Alarming

The operating voltage threshold is 3.2V. If the voltage is lower than 3.2V, R718WB2 will send a

low-power report to the Lora network.

8. Installation method

This product comes with waterproof function. When using it, the back of it can be adsorbed on the

iron surface, or the two ends can be fixed to the wall with screws.

Note: When installing the battery, use a screwdriver or similar tool to assist in opening the battery

cover.

As shown in the schematic diagram, the water rope sensor is placed in a position where leakage is

required and fixed by the tape.

9. Important Maintenance Instruction

Your device is a product of superior design and craftsmanship and should be used with care. The

following suggestions will help you use the warranty service effectively.

• Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that

can corrode electronic circuits. In case the device is wet, please dry it completely.

• Do not use or store in dusty or dirty areas. This can damage its detachable parts and electronic

components.

• Do not store in excessive heat. High temperatures can shorten the life of electronic devices, destroy

batteries, and deform or melt some plastic parts.

• Do not store in a cold place. Otherwise, when the temperature rises to normal temperature,

moisture will form inside, which will destroy the board.

• Do not throw, knock or shake the device. Rough handling of equipment can destroy internal circuit

boards and delicate structures.

• Do not wash with strong chemicals, detergents or strong detergents.

• Do not apply with paint. Smudges can block debris in detachable parts and affect normal operation.

• Do not throw the battery into a fire to prevent the battery from exploding. Damaged batteries may

also explode.

All of the above suggestions apply equally to your device, battery and accessories. If any device is

not working properly.

Please take it to the nearest authorized service facility for repair.

Andere Handbücher für R718WB2

Inhaltsverzeichnis

Andere netvox Sicherheitssensor Handbücher

netvox

netvox R313WA Bedienungsanleitung

netvox

netvox ZB11C Bedienungsanleitung

netvox

netvox R313A Bedienungsanleitung

netvox

netvox R718WA2 Bedienungsanleitung

netvox

netvox R718WB Bedienungsanleitung

netvox

netvox ZB11D Bedienungsanleitung

netvox

netvox RA02C Bedienungsanleitung

netvox

netvox R719A Bedienungsanleitung

netvox

netvox R718PA9 Bedienungsanleitung

netvox

netvox R313CC Bedienungsanleitung

netvox

netvox S31502 Bedienungsanleitung

netvox

netvox RA02A Bedienungsanleitung

netvox

netvox R718WB2 Bedienungsanleitung

netvox

netvox R313LA Bedienungsanleitung

netvox

netvox S31501 Bedienungsanleitung

netvox

netvox RA08D Series Bedienungsanleitung

netvox

netvox R718B Bedienungsanleitung

netvox

netvox R311W Bedienungsanleitung

netvox

netvox Z801TXB Bedienungsanleitung

netvox

netvox R718WAA Bedienungsanleitung

netvox

netvox R313WA Bedienungsanleitung

netvox

netvox R311CB Bedienungsanleitung

netvox

netvox R718WA Bedienungsanleitung

netvox

netvox R313CB Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung