Nibe F2030 Bedienungsanleitung
User manual
LEK
NIBE™ F2030
Air/water heat pump
UHB GB 1317-1
231116
Table of Contents
1 Important information 2
Installation data 2
Safety information 4
Safety precautions 5
Serial number 7
Contact information 8
F2030 - An excellent choice 10
2 The heat pump – the heart of the house 11
Heat pump function 11
Contact with F2030 13
Maintenance of F2030 14
3 Disturbances in comfort 19
Troubleshooting 19
4 Technical data 22
5 Glossary 23
Item register 28
1NIBE™ F2030Table of Contents |
1Important information
Installation data
F2030Product
Serial number
Installation date
Installer
Serial number must always be given
Certification that the installation is carried out according to instructions
in NIBE's installer manual and applicable regulations.
_________________________Signed__________________Date
Accessories
✔
SetDefault
set-
tings
NameChan-
nel
1Communications ad-
dress
A1
4°CConnection diff. re-
turn temp.
A3
20 minStart interval com-
pressor
A4
0°CBalance temperatureA5
120 minTime delay addition
relay
A6
-20 °CStop temperatureA7
NIBE™ F2030Chapter 1 | Important information2
Accessories
✔
SetDefault
set-
tings
NameChan-
nel
65Min. interval between
defrosting
A8
-3 °CStart defrostingA9
+20 °CStop defrostingA10
0Activation collar heat-
er
A14
0Activation de-icing fanA15
1Defrosting typeA16
3NIBE™ F2030Chapter 1 | Important information
Safety information
This appliance is designed for use in a home environ-
ment and not intended to be used by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person respons-
ible for their safety. This in accordance to applicable
parts of the low-voltage directive 2006/95/EC, LVD.
The appliance is also intended for use by experts or
trained users in shops, hotels, light industry, on farms
and in similar environments. This in accordance to ap-
plicable parts of the machinery directive 2006/42/EC.
Children should be supervised to ensure that they do
not play with the appliance.
This is an original instruction manual. Translation is
not allowed without approval from NIBE.
Rights to make any design or technical modifications
are reserved.
©NIBE 2013.
Symbols
NOTE
This symbol indicates danger to machine or person.
Caution
This symbol indicates important information about what you should ob-
serve when maintaining your installation.
TIP
This symbol indicates tips on how to facilitate using the product.
NIBE™ F2030Chapter 1 | Important information4
Marking
The CE marking means that NIBE ensures that the product meets all regu-
lations that are placed on it based on relevant EU directives. The CE mark
is obligatory for most products sold in the EU, regardless where they are
made.
Safety precautions
Caution
The installation must be carried out by a qualified installer.
If you install the system yourself, serious problems may occur, for example water leaks,
refrigerant leaks, electric shocks, fire and personal injury, as a result of a system malfunc-
tion.
Use original accessories and the stated components for the installation.
If parts other than those stated by us are used, water leaks, electric shocks, fire and
personal injury may occur as the unit may not work properly.
Install the unit in a location with good support.
Unsuitable installation locations can cause the unit to fall and cause material damage
and personal injury. Installation without sufficient support can also cause vibrations and
noise.
Ensure that the unit is stable when installed, so that it can withstand earthquakes
and strong winds.
Unsuitable installation locations can cause the unit to fall and cause material damage
and personal injury.
The electrical installation must be carried out by a qualified electrician and the
system must be connected as a separate circuit.
Power supply with insufficient capacity and incorrect function can cause electric shocks
and fire.
Do not perform any repairs yourself. Consult the dealer if the system requires repair.
Incorrectly performed repairs can cause water leakage, refrigerant leakage, electric
shocks or fire.
Consult the dealer or an expert regarding removal of the heat pump.
Incorrect installation can cause water leakage, refrigerant leaks, electric shocks or fire.
Switch off the power supply in the event of a service or inspection.
If the power supply is not shut off, there is a risk of electric shocks and damage due to
the rotating fan.
Do not run the unit with removed panels or protection.
Touching rotating equipment, hot surfaces or high voltage parts can cause personal
injury due to entrapment, burns or electric shocks.
Cut the power before starting electrical work.
Failure to cut the power can cause electric shocks, damage and incorrect function of
the equipment.
Care
Do not use the unit where water splashes may occur, for example in laundries.
The indoor section is not waterproof and electric shocks and fire can therefore occur.
5NIBE™ F2030Chapter 1 | Important information
Do not use the unit for specialist purposes such as for storing food, cooling precision
instruments, freeze-conservation of animals, plants or art.
This can damage the items.
Do not install the outdoor unit in the locations stated below.
- Locations where leakage of combustible gas can occur.
- Locations where carbon fibre, metal powder or other powder that can enter the air.
- Locations where substances that can affect the unit, for example, sulphide gas, chlorine,
acid or alkaline substances can occur.
- Locations with direct exposure to oil mist or steam.
- Vehicles and ships.
- Locations where machines that generate high frequency harmonics are used.
- Locations where cosmetic or special sprays are often used.
- Locations that can be subjected to direct salty atmospheres. In this case, the outdoor
unit must be protected against direct intakes of salty air.
- Locations where large amounts of snow occur.
- Locations where the system is exposed to chimney smoke.
If the bottom frame of the outdoor section is corroded, or in any other way dam-
aged, due to long periods of operation, it must not be used.
Using an old and damaged frame can cause the unit to fall and cause personal injury.
Do not allow the drainage pipe to exit into channels where poisonous gases,
containing sulphides for example, can occur.
If the pipe exits into such a channel, any poisonous gases will flow into the room and
seriously affect the user's health and safety.
Insulate the unit's connection pipes so that the ambient air moisture does not
condense on them.
Insufficient insulation can cause condensation, which can lead to moisture damage on
the roof, floor, furniture and valuable personal property.
Do not install the outdoor unit in a location where insects and small animals can
inhabit.
Insects and small animals can enter the electronic parts and cause damage and fire. In-
struct the user to keep the surrounding equipment clean.
Dispose of any packaging material correctly.
Any remaining packaging material can cause personal injury as it may contain nails and
wood.
Do not touch any buttons with wet hands.
This can cause electric shocks.
Do not shut off the power supply immediately after operation has start.
Wait at least 5 minutes, otherwise there is a risk of water leakage or breakdown.
Do not control the system with the main switch.
This can cause fire or water leakage. In addition, the fan can start unexpectedly, which
can cause personal injury.
NIBE™ F2030Chapter 1 | Important information6
Serial number
The serial number can be found at the top left of the rear cover and on
the foot of the product.
6HULDO QXPEHU
Caution
Always give the product's serial number when reporting a fault.
7NIBE™ F2030Chapter 1 | Important information
Contact information
KNV Energietechnik GmbH, Gahberggasse 11, 4861 SchörflingAT
Tel: +43 (0)7662 8963-0 Fax: +43 (0)7662 8963-44 E-mail: mail@knv.at
www.knv.at
NIBE Wärmetechnik AG, Winterthurerstrasse 710, CH-8247 FlurlingenCH
Druzstevni zavody Drazice s.r.o, Drazice 69, CZ - 294 71 Benatky nad
Jizerou
CZ
www.nibe.cz
NIBE Systemtechnik GmbH, Am Reiherpfahl 3, 29223 CelleDE
www.nibe.de
Vølund Varmeteknik A/S, Member of the Nibe Group, Brogårdsvej 7,
6920 Videbæk
DK
dvt.dk
NIBE Energy Systems OY, Juurakkotie 3, 01510 VantaaFI
AIT France, 10 rue des Moines, 67000 HaguenauFR
NIBE Energy Systems Ltd, 3C Broom Business Park, Bridge Way,
Chesterfield S41 9QG
GB
www.nibe.co.uk
NIBE Energietechniek B.V., Postbus 2, NL-4797 ZG WILLEMSTAD (NB)NL
ABK AS, Brobekkveien 80, 0582 Oslo, Postadresse: Postboks 64 Vollebekk,
0516 Oslo
NO
ergysystems.no
NIBE-BIAWAR Sp. z o. o. Aleja Jana Pawła II 57, 15-703 BIAŁYSTOKPL
Tel: 085 662 84 90 Fax: 085 662 84 14 E-mail: sekretariat@biawar.com.pl
www.biawar.com.pl
© "EVAN" 17, per. Boynovskiy, Nizhny NovgorodRU
NIBE™ F2030Chapter 1 | Important information8
Andere Handbücher für F2030
2
Inhaltsverzeichnis
Andere Nibe Wärmepumpe Handbücher
Nibe
Nibe ERS 20-250 Benutzerhandbuch
Nibe
Nibe F1255 Series Benutzerhandbuch
Nibe
Nibe F1345 Series Bedienungsanleitung
Nibe
Nibe F750 Bedienungsanleitung
Nibe
Nibe F1226 series Bedienungsanleitung
Nibe
Nibe SOLAR 40 Benutzerhandbuch
Nibe
Nibe F1330 Kurzanleitung
Nibe
Nibe F2120 Series Bedienungsanleitung
Nibe
Nibe F125 Benutzerhandbuch
Nibe
Nibe F470 Benutzerhandbuch
Nibe
Nibe 1127-2 Benutzerhandbuch
Nibe
Nibe S2125 Bedienungsanleitung
Nibe
Nibe S1155PC Bedienungsanleitung
Nibe
Nibe F750 Betriebsanleitung
Nibe
Nibe F2120-16 Bedienungsanleitung
Nibe
Nibe F470 Bedienungsanleitung
Nibe
Nibe AirSite GreenMaster-HP 12 Series Benutzerhandbuch
Nibe
Nibe F750 Benutzerhandbuch
Nibe
Nibe VST 20 Bedienungsanleitung
Nibe
Nibe F1345 Series Bedienungsanleitung
Beliebte Wärmepumpe Handbücher anderer Marken
Mitsubishi Electric
Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung
Dimplex
Dimplex LI 16I-TUR Benutzerhandbuch
Carrier
Carrier WSHP Open v3 Kurzanleitung zur Einrichtung
TGM
TGM CTV14CN018A Bedienungsanleitung
Carrier
Carrier 38MGQ Series Bedienungsanleitung
Kokido
Kokido K2O K880BX/EU Fehlerbehebungshandbuch
