Nikon Super Coolscan 9000 ED Betriebsanleitung

作成承認印配布許可印

Copyrigh ｃ2004 by Nikon Corporation.

Printed in Japan March 2004

VRA51701-R.3607.A

VRA51701

REPAIR MANUAL

Ｍ

サービス

計画課

VRA51701-R.3607.A

-LS-9000 -

CONTENTS

SPECIFICATIONS M1-M3

DISASSEMBLING

External cover D1

Main PCB, Power-PCB D2

Illumination unit, Base unit D3

Stage carriage unit D4

Stage carriage lead screw D5

AF carridge unit D6

AF carriage unit D7

Lead screw, AF motor, mirror uni D8

ASSEMBLY

Mirror / AF sensor A1

Assemble AF screw shaft A2

Assemble AF screw shaft A3

Assemble AF motorA4

AF carriage unit A5

Assemble AF carriage unit A6

AF carriage unit connections A7

Stage carriage A8

Stage carriage screw shaft unit A9

Assemble Screw shaft A10

Procedure for mounting SCAN motor unit A11

Stage carriage unit A12-A13

Holder motor unit A14

Illumination unit A15

Assemble Illumination unit A16

Base unit A17

Main PCB / Power unit A18

Front panel A19-A21

External view A22

Adjustments A23-A50

ELECTRICITY

Block diagram E1

Wiring E2

INSPECTION STANDARD & TOOL

Inspection Standard R1-R5

Tool List T1-T2

VRA51701-R.3607.A

- M1 ･ -

LS-9000

Media Negatives and positives, in color and monochrome

35-mm lm 1–2 strips of 1–6 frames. Up to 3 frames of 24 × 48 mm or 24 × 65 mm panorama

lm can be scanned with optional FH-869GR lm holder.

35-mm slides 1–5 slides with mounts 1.0–3.2 mm thick.

Medium-format lm 1–4 frames (6 × 4.5), 1–3 frames (6 × 6), or 1–2 frames (6 × 7, 6 × 8, or 6 × 9).

Medium-format slides Slides with mounts 1.0–3.2 mm thick can be scanned with optional FH-869M

lm holder.

Scanning system Fixed optical, movable media, parallel single-pass scanning system

Light source Red, Green, Blue, and Infrared (RGBIr) LEDs; slit light source with rod and dis-

perser

Image sensor 10,000 pixel three-line monochrome linear CCD image sensor

Color separation Performed by RGB LEDs

Optical resolution Up to 4000 pixels per inch

Analog-to-digital (A/D)

conversion

16 bits per color

Output Full color or greyscale at 8 or 16 bits per channel

Focus Auto and manual

Interface IEEE 1394

Power supply AC 100–240 V, 50/60 Hz

Operating environment +10–+35 °C (+50–+95 °F) at a humidity of 20–60%

Size and weight 249 × 498.5 × 202 mm/9.8˝ × 19.6˝ × 8.0˝ (W × H × D), 9 kg/19.8 lb (approx.)

16-mm lm 1–3 strips of 1–20 frames can be scanned with optional FH-816 lm holder.

Glass microscope slides 1–3 prepared glass microscope slides (26 × 76 mm, 0.8–1.5 mm thick) can be

scanned with optional FH-8G1 lm holder.

FH-

835S

FH-

835M

FH-869S, FH-869G

Aperture (mm)

Scan range (pixels) 4000

5904

5905

4032

8964

6696

25.4

37.5

25.6

56.9

42.5

Aperture/scan range

6 × 4.5

8964

56.9

6 × 6

8964

11016

56.9

70.0

6 × 7

8964

12204

56.9

77.5

6 × 8

8964

13176

56.9

83.7

6 × 9

8964

13176

56.9

83.7

5.9×8.2

2362

3384

15.0

21.48

FH-

816

7248

3780

46.02

24.0

FH-

8G1

Power consumption 27 W or less; 14 W or less in standby mode

Specication

VRA51701-R.3607.A

- M2 ･ -

LS-9000

* Times for positive lm scanned at input resolution of 4000 dpi (2000 dpi when FH-869S is used with Digital DEE) and bit depth of 16 bits (CMS

on) using Nikon Scan 4 on Pentium 4 3.06 GHz FSB 533 MHz computer with 1 GB RAM, Windows XP Professional, IEEE 1394 interface, and

1024 × 768 display.

† Input resolution set to 2000 dpi

Scanning time

(Time to display image

when Preview button is

clicked, or when Scan

button is clicked follow-

ing preview. Times do

not include autofocus or

holder positioning.)*

With FH-835M 35-mm slide mount holder

With FH-869S 120/220 lm holder

Supplied Film Holders

FH-835S 35-MM STRIP FILM HOLDER

Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 200 g/7.1 oz. (approx.)

Film 1–2 strips of 35-mm lm, each with 1–6 frames

FH-835M 35-MM MOUNTED FILM HOLDER

Film 1–5 35-mm slides with mounts 1.0–3.2 mm thick and 49.0–50.8 mm wide

Size and weight 130 × 345 × 17 mm/5.1˝ × 13.6˝ × 0.7˝ (W × H × D), 180 g/6.3 oz. (approx.)

FH-869S 120/220 STRIP FILM HOLDER

Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 290 g/10.2 oz. (approx.)

6 × 4.5

6 × 6

6 × 7, 6 × 8, 6 × 9 1–2 frames

1–3 frames

1–4 frames

Film Medium-format (120/220) lm, 5.9 × 8.2 cm electron microscope lm

DEE Preview Scan

40 s

52 s

41 s

57 s

1 min 27 s

1 min 31 s

13 s

28 s

12 s

14 s

26 s

Off

GEM

Off

Scan Image

Enhancer ROC

Off

ICE

Off

2 min 33 s

33 s

On On

DEE Preview Scan

3 min 05 s

8 min 55 s

3 min 14 s

7 min 05 s

2 min 20 s

11 min 40 s

38 s

1 min 26 s

38 s

40 s

38 s

1 min 26 s

Off

On†

GEM

Off

Scan Image

Enhancer ROC

Off

ICE

Off

16 min 00 s

2 min 24 s

Off

On On

Supplied Film Holders

VRA51701-R.3607.A

- M3 ･ -

LS-9000

Optional Film Holders

FH-869M 120/220 MOUNTED FILM HOLDER

Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 170 g/6.0 oz. (approx.)

Film One 6 × 4.5 or 6 × 6 slide and one 6 × 7, 6 × 8, or 6 × 9 slide

FH-8G1 MEDICAL HOLDER

Size and weight 130 × 345 × 17 mm/5.1˝ × 13.6˝ × 0.7˝ (W × H × D), 190 g/6.7 oz. (approx.)

Slide

Slide cover

Total thickness No more than 2 mm, including adhesive

25 × 60 mm with thickness of 0.18 mm or less

26 × 76 mm, 0.8–1.5 mm thick

Media 1–3 prepared glass microscope slides

FH-869G 120/220 STRIP FILM HOLDER WITH GLASS

Size and weight 130 × 300 × 17 mm/5.1˝ × 11.8˝ × 0.7˝ (W × H × D), 300 g/10.6 oz. (approx.)

6 × 4.5

6 × 6

6 × 7, 6 × 8, 6 × 9 1–2 frames

1–3 frames

1–4 frames

Film Medium-format (120/220) lm, 5.9 × 8.2 cm electron microscope lm

FH-869GR ROTATING 120/220 STRIP FILM HOLDER WITH GLASS

Angle adjustment ±5 °

6 × 4.5

6 × 6

6 × 7, 6 × 8, 6 × 9 1–2 frames

1–3 frames

1–4 frames

Film Medium-format (120/220) lm, 5.9 × 8.2 cm electron microscope lm, 35-mm

panorama lm with frame size of 24 × 48 mm or 24 × 65 mm

Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 330 g/11.6 oz. (approx.)

FH-816 16-MM STRIP FILM HOLDER

Film 1–3 strips of 16-mm lm, each with 1–20 frames

Size and weight 130 × 375 × 17 mm/5.1˝ × 14.8˝ × 0.7˝ (W × H × D), 250 g/8.8 oz. (approx.)

Optional Film Holders

VRA51701-R.3607.A

- Ｄ1 ･ -

LS-9000

Disassembly

Notes: ①　Be sure to remove the power wire before disassembly.

②　When disassembling, make sure to memorize the processing state of wires and FPCs, screws to be xed

and their types, etc.

③　Because ICs are easily damaged by static electricity, be sure to get yourself earthed/grounded when

holding the main PCB and FPCs.　　　　

External cover

・Take out 8 screws at the back (#192) and 10 screws at the bottom (#192), then remove the side cover by sliding it.

(Removing 2 rubbers (#36) is unnecessary except when they are replaced.）

・Remove the rear panel (#32) by taking out 3 screws (#192) and 2 screws (#188). The connector shield-plate (#46)

comes off accordingly.

　・Remove the connector on the main PCB A-part (which is connected from the front cover).

　・Uncover the front cover by taking out 4 screws (#192).

#188

ICE

ABS

#31

#192 x8

#192 x4

#32

#36 x2

#192 x10

#46

#192 x3

Front cover

Main PCB A-part

#192×8

#192×10

#36×2

#31

#188×2

#192×4

#46

#32

#192×3

VRA51701-R.3607.A

- Ｄ2 ･ -

LS-9000

#560

ABS

#50

#522

#197

#192 x4

#35

#541

#192 x6

#45

#43

#42

#516

#551 #192 x4

#517

#510

#509

・ Remove the main PCB (#541) by taking out 6 screws (#192).

・ Disconnect 6 connectors on the main PCB (#560, #551, #516, #509, #510, and #517), then remove the main PCB.

　･ Remove the spring (#45) and unhook the A-part of the power SW (#42). 　

　･ Remove the power-PCB (#522) and insulating sheet (#50) by taking out 1 screw (#197) and 4 screws (#192).

　･ Remove the power base (#35) by taking out 4 screws (#192).

　Main PCB, Power-PCB

VRA51701-R.3607.A

- Ｄ3 ･ -

LS-9000

#47

#197

#192 x2

#192

#192 x6

#34

#48

　Illumination unit, Base unit

・ Remove the relay-FPC from the connector of the illumination-PCB.

・ Remove the illumination unit from the base unit (#121) by taking out 4 screws (#192).　

　･ Remove the base unit from the bottom plate (#34) by taking out 4 screws (#197).

　･ Remove the PCB support-plate (#47) by taking out 6 screws (#192).

Illumination PCB

Illumination unit

＃121

Relay-FPC

Connector

VRA51701-R.3607.A

- Ｄ4 ･ -

LS-9000

　Stage carriage unit

・ Disconnect the connector of the holder motor by pulling it in the

direction indicated by the arrow.

・ Remove the holder motor unit by taking out 3 screws (#194).　

・ Take out 4 screws (#194) and remove 4 retaining springs (#104).　

･ Take out 2 screws (#191) then the stage carriage comes off with 2

guide shafts (#123) attached.

・ Pull out 2 guide shafts (#123).

#194×3

Connector

Stage carriage Holder motor unit

Screw shaft

#194×3

#191×3

#194×4

#104×4

#123×2

VRA51701-R.3607.A

- Ｄ5 ･ -

LS-9000

　Stage carriage lead screw

・ Loosen 4 screws of the coupling (#137).

・ Take out 2 screws (#192) and remove the SCAN motor unit.

＊ Note:

Whenever the SCAN motor unit is detached, reassemble the motor unit by using the SCAN motor assembling tool.

・Take out 2 screws (#194) then remove 2 retaining springs (#104) and screw shaft. 　

　＊ Note:

Remove the screw shaft with care because the bearing (#135), washer (#134) and spring (#136) jump out of the shaft.

・ Remove #151 by taking out the screw (#194).

#135

#136

#134

#137

Screw shaft SCAN motor unit

#194×2

#192×2

#104×2

#194

#151

4 screws (#137)

Andere Handbücher für Super Coolscan 9000 ED

Inhaltsverzeichnis

Andere Nikon Scanner Handbücher

Nikon

Nikon Scanners Montageanleitung

Nikon

Nikon LS8000 Bedienungsanleitung

Nikon

Nikon SUPER COOLSCAN 8000 ED Bedienungsanleitung

Nikon

Nikon AX-110 Bedienungsanleitung

Nikon

Nikon Transparency Unit Bedienungsanleitung

Nikon

Nikon COOLSCAN LS-10 Montageanleitung

Nikon

Nikon LS4000 Bedienungsanleitung

Nikon

Nikon COOLSCAN V ED Bedienungsanleitung

Nikon

Nikon 9238 - Super Coolscan 5000 ED Bedienungsanleitung

Nikon

Nikon AX-210 Bedienungsanleitung

Nikon

Nikon COOLSCAN V ED Bedienungsanleitung

Nikon

Nikon SF-200 Bedienungsanleitung

Nikon

Nikon Scan 4 Bedienungsanleitung

Nikon

Nikon Coolscan III LS-30 Bedienungsanleitung

Nikon

Nikon AF-S DX NIKKOR 35mm f/1.8G Bedienungsanleitung

Nikon

Nikon LC15Dx Bedienungsanleitung

Nikon

Nikon LS-2000 Handbuch

Nikon

Nikon Super Coolscan 9000 ED Bedienungsanleitung

Nikon

Nikon LS-3510 Bedienungsanleitung

Nikon

Nikon SUPER COOLSCAN 8000 ED Bedienungsanleitung

Nikon

Nikon LS-4500AF Bedienungsanleitung

Nikon

Nikon COOLSCAN LS-10E Bedienungsanleitung

Nikon

Nikon LS-1000 Bedienungsanleitung

Nikon

Nikon Coolscan III LS-30 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung