Nilfisk-Advance Convertamatic 200E 56324006 Bedienungsanleitung

Electronic Service

Manuals

This electronic document is provided as a service to our custom-

ers. We do not create the contents of the information contained in

this document. Should you have detailed questions pertaining to

the information contained in this document, you may contact Michco,

or the manufacturer which provided the original information in this

electronic deliverable. Michco’s only part in this electronic deliver-

able was the electronic assembly process.

You may contact Michco through the following methods:

Phone (517) 484-9312 or (800) 331-3339 MI, OH, IN only

2011 N. High St. -- Lansing, Michigan -- 48906

Fax: (517) 484-9836

Email: [email protected]

Web site: www.Michco.Com

Parts Web site: www.FloorMachineParts.Com

Order Parts on Line at:

www.FloorMachineParts.Com

Directly to Parts & Service:

By Email: [email protected]

By Fax: (517) 702-2041

By Voice: Use numbers above.

Serving the Cleaning Industry Since 1922

Notice: All copyrighted material remains property of original owners, all trademarks are property of respective

owners. Manuals are subject to Manufacturer’s reproduction limitations. Originals or reproductions were provided

by manufacturers through a request. We make no warranty as to the correctness of information provided in this

document and you assume all risk.

revised 3/97 Form Number 56041262

This manual replaces revisions 11/92 and 5/93

Convertamatic

™

200E

OPERATOR MANUAL

Advance MODELS 56324004, 56324006

041262 Convertamatic 200E Operator Manual - 1

TABLE OF CONTENTS

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Page

Introduction................................................................................. 2

Parts and Service................................................................... 2

Nameplate.............................................................................. 2

Uncrating................................................................................ 2

Important Safety Instructions.................................................... 3

Importantes Mesures de Securite ............................................. 4

Grounding Instructions.............................................................. 5

Know Your Machine ................................................................... 6

Preparing the Machine for Use.................................................. 7

Brush or Pad Holder Installation ............................................ 7

Filling the Solution Tank......................................................... 7

Operating the Machine............................................................... 8

Wet Scrubbing ....................................................................... 8

Dry Buffing ............................................................................. 9

Wet Vacuuming...................................................................... 9

After Use.................................................................................... 10

Maintenance Schedule ........................................................ 10

Maintenance.............................................................................. 11

Lubrication ........................................................................... 11

Vacuum Motor Brushes ....................................................... 11

Squeegee Replacement (after serial #0536424) ................. 12

Squeegee Angle Adjustment (after serial #0536424) .......... 12

Squeegee Replacement (before serial #0536425) .............. 13

Squeegee Angle Adjustment (before serial #0536425) ....... 13

Troubleshooting ....................................................................... 14

Circuit Breakers Tripping ..................................................... 14

Poor Water Pickup ............................................................... 14

Squeegee Streaks ............................................................... 14

Swirl Marks .......................................................................... 14

2 - Convertamatic 200E Operator Manual 041262

INTRODUCTION

This manual will help you get the most from your Advance Convertamatic™ 200E. Read it thoroughly before operating

the machine.

Note: Bold numbers in parentheses indicate an item illustrated on page 6.

This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Advance Service Center, which employs factory trained

service personnel, and maintains an inventory of Advance original replacement parts and accessories.

CalltheADVANCEDEALERnamed belowforrepair partsorservice. Please specifytheModel NumberandSerial Number

when discussing your machine.

(Dealer, affix service sticker here.)

NAMEPLATE

The Model and Serial Number of your machine are shown on the Nameplate on the back of the machine. This information

is needed when ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your

machine for future reference.

MODEL _____________________________________

SERIAL NUMBER _____________________________

UNCRATING

When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident,

save the shipping carton so it can be inspected by the trucking company that delivered it. Contact the trucking company

immediately to file a freight damage claim.

After removing the carton, cut the plastic straps and remove the wooden blocks next to the wheels. Use a ramp to roll

the machine from the pallet to the floor.

041262 Convertamatic 200E Operator Manual - 3

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before use.

WARNING!

To reduce the risk of fire, electric shock, or injury:

1Do not leave the appliance when it is plugged in. Unplug the unit from the outlet when not in use and before

servicing.

2To avoid electric shock, do not expose to rain. Store indoors.

3Do not allow to be used as a toy. Close attention is necesary when used by or near children.

4Use only as described in this manual. Use only manufacturer's recommended attachments.

5Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged,

left outdoors, or dropped into water, return it to a service center.

6Do not pull or carry by cord, use cord as a handle, close a door on a cord, or pull cord around sharp edges

or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

7Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

8Do not handle plug or appliance with wet hands.

9Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and

anything that may reduce air flow.

10 Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

11 Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

12 Turn off all controls before unplugging.

13 Use extra care when cleaning on stairs.

14 Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be

present.

15 Connect to a properly grounded outlet only. See grounding instructions.

SAVE THESE INSTRUCTIONS

4 - Convertamatic 200E Operator Manual 041262

L’utilisation d’un appareil électrique demande certaines précautions:

LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER (CET APPAREIL)

AVERTISSEMENT: Pour réduire les risques d’incendie, de choc électrique ou de blessure:

1Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas

utilisé et avant l’entretien.

2Pour réduire les risques de choc électrique, utiliser à l’intérieur seulement.

3Ne pas permettre aux enfants de jouer avec l’appareil. Une attention particulière est nécessaire lorsque

l’appareil est utilisé par des enfants ou à proximité de ces derniers.

4N’utiliser que conformément à cette notice avec les accessoires recommandés par le fabricant.

5Ne pas utiliser si le cordon ou la fiche est endommagé. Retourner l’appareil à un atelier de réparation s’il ne

fonctionne pas bien, s’il est tombé ou s’il a été endommagé, oublié à l’extérieur ou immergé.

6Ne pas tirer soulever ou traîner l’appareil par le cordon. Ne pas utiliser le cordon comme une poignée, le

coincer dans l’embrasure d’une porte ou l’appuyer contre des arêtes vives ou des coins. Ne pas faire rouler

l’appareil sur le cordon. Garder le cordon à l’écart des surfaces chaudes.

7Ne pas débrancher en tirant sur le cordon. Tirer plutôt la fiche.

8Ne pas toucher la fiche ou l’appareil lorsque vos mains sont humides.

9N’insérer aucun objet dans les ouvertures. Ne pas utiliser l’appareil lorsqu’une ouverture est bloquée.

S’assurerquedelapoussière,de lapeluche,descheveuxoud’autresmatières neréduisentpasledébitd’air.

10 Maintenirlescheveux, lesvêtementsamples,lesdoigts ettouteslespartiesducorps àl’écartdesouvertures

et des pièces mobiles.

11 Nepasaspirerdematièresencombustionouquidégagentdelafumée,commedescigarettes,desallumettes

ou des cendres chaudes.

12 Mettre toutes les commandes à la position ARRÊT avant de débrancher l’appareil.

13 User de prudence lors du nettoyage des escaliers.

14 Ne pas aspirer des liquides inflammables or combustibles, comme de l’essence, et ne pas faire fonctionner

dans des endroits ou peuvent se trouver de tels liquides.

15 Ne brancher qu’à une prise de courant avec mise à la terre. Voir les instructions visant la mise à la terre.

CONSERVER CES INSTRUCTIONS

IMPORTANTES MESURES DE SECURITE

041262 Convertamatic 200E Operator Manual - 5

GROUNDING INSTRUCTIONS

•Replace the plug if the grounding pin is damaged or broken.

•Thegreen (or green/yellow)wire in thecord is thegrounding wire. Whenreplacing a plug,this wire mustbe attached

to the grounding pin only.

•Extensioncordsconnected tothismachineshould be12gauge,three-wire cordswiththree-prongplugs andoutlets.

Do not use extension cords more than 50 feet (15 m) long.

A grounding adapter must be installed as

shown here if only two-prong outlets are

available. The outlet box must be grounded

andthegroundingtab(orwire)ontheadapter

must be installed under the head of the

screw in the center of the outlet cover.

Grounding adapters for 120 volt plugs are

available at most hardware stores.

Grounding adapters are not approved for

use in Canada.

GROUNDED

OUTLET BOX

METAL SCREW

TWO-PRONG

OUTLET

GROUNDING

TAB

120 VOLT PLUG

GROUNDED

OUTLET BOX

THREE-PRONG

GROUNDED OUTLET

GROUNDING PLUG

120 VOLT PLUG

120 volt machines have this kind of three-prong plug at

the end of a three-wire electrical cord. The grounding pin

on this plug grounds the machine when it is plugged into

a three-prong outlet.

WARNING!

This machine must be properly grounded to protect the operator from electrical shock. Read the safety

instructions below before operating this machine.

6 - Convertamatic 200E Operator Manual 041262

KNOW YOUR MACHINE

As you read this manual, you will occasionally run across a bold number in parentheses - example: (2). These numbers

refer to an item shown on this page. Refer back to this page whenever necessary, to pinpoint the location of an item

mentioned in the text.

1Solution Tank Fill

2Recovery Hose

3Vacuum Hose

4Recovery Tank Cover

5Squeegee Lever

6Solution Auto Control ON Light (Blue)

7Twist Grip

8Master Power ON Light (Green)

9Solution Rate of Flow Control Lever

10 Solution Switch, ON - OFF - Momentarily ON

11 Master Key Switch

12 Solution Tank Drain Hose

13 Brush Raise/Lower Pedal

14 Squeegee

15 Recovery Hose Connection

16 Tip-Back Leg

17 Tip-Back Pedal

18 Recovery Tank Drain Hose

19 Brush Motor Circuit Breaker 15A

20 Vacuum Motor Circuit Breaker 6A

21 Power Cord

041262 Convertamatic 200E Operator Manual - 7

PREPARING THE MACHINE FOR USE

BRUSH OR PAD HOLDER INSTALLATION

WARNING!

Moving parts - turn the Master Key Switch (11) OFF and unplug the Power Cord (21) before servicing.

IMPORTANT!

Empty the tanks before tipping the machine back to install or change a brush, or to install, change or turn over a

pad.

1If using a pad, install the pad on the pad holder.

2To tip the machine back, step down on the Tip-Back Pedal (17) while pulling the handle back. The machine will rest

on its two Tip-Back Legs (16).

3Align the slots on the brush or pad holder with the lugs on the drive hub.

4Turn the brush or pad holder until it locks in place.

FILLING THE SOLUTION TANK

Fill the solution tank (1) with ten gallons (37 liters) of cleaning solution. Do not fill the solution tank above three inches (7.5

cm)fromthe top of the tank. The solutionshould be a mixture of waterand the proper cleaning chemical forthejob. Always

follow the dilution instructions on the chemical container label.

CAUTION!

Use only low-sudsing, non-flammable liquid detergents intended for machine application.

8 - Convertamatic 200E Operator Manual 041262

OPERATING THE MACHINE

WET SCRUBBING

Note: Bold numbers in parentheses indicate an item illustrated on page 6.

1Follow the instructions in the Preparing The Machine For Use section of this manual.

2Plug the Power Cord (21) into a properly grounded electrical outlet. Then turn the Master Key Switch (11) ON. The

Green Light (8) will light up.

3Move the Squeegee Lever (5) to lower the squeegee and turn on the vacuum system.

4Turn the Solution Switch (10) ON. The Blue Light (6) will light up. Pull the Solution Lever (9) up half way.

5Step down and slide the Brush Raise / Lower Pedal (13) to to the left to lower the brush.

6Move the machine forward and rotate the Twist Grips (7) forward to start the brush motor and the solution flow. For

best results, move the machine at a slow walking speed.

The brush and solution will only operate when the Twist Grips are rotated forward.

CAUTION!

To avoid damaging the floor, keep the machine moving while the brush is turning.

7Adjust the Solution Flow Control Lever (9) so a thin, even layer of solution can be seen in front of the Squeegee (14).

8The recovery tank has an automatic float shut-off to prevent solution from entering the vacuum system when the

recovery tank is full. When the float closes, the recovery tank must be emptied. The machine will not pick up water

with the float closed.

9Whentherecoverytankisfull, turntheSolutionSwitch (10)OFF,raise thesqueegeeandthe brush(orpad),andmove

the machine to a service area. To empty the recovery tank, remove the Recovery Drain Hose (18) from its hanger.

Direct the hose to a floor drain or bucket and remove the plug.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nilfisk-Advance Bodenreinigungsmaschine Handbücher

Nilfisk-Advance

Nilfisk-Advance ecoflex SC7000 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance whirlamatic pro 21H Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance CS7010 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance BHS 5120 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance AquaClean 16ST Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance 56459500 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Micromatic 17B Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Whirlamatic 20 Ultra Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance CA 331 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SM 800 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SCRUBTEC 344 Series Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance AquaClean 12 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance CR 1100B Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance BA 725 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW900 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance HARAM CAPTOR ll Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Advenger 2800ST Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Advance Pacesetter 13 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance RS 500 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Advance ES300 ST Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Kent SelectLine 17TS Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ER 1300 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Advance Shadow 17 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance FM810 ST 56105614 Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

BETCO

BETCO PB24 Bedienungsanleitung

IPC

IPC CT51-71 BT Bedienungsanleitung

Isoplam

Isoplam L010001 Bedienungsanleitung