Nordson SCF-M1 Bedienungsanleitung

OBSOLETE

SCF-M1 Handgun

Part 108 236B

NORDSON CORPORATION AMHERST, OHIO USA

OBSOLETE

1997 Nordson Corporation

108 236B

Issued 1/97

Manual 4-26

Nordson Corporation welcomes requests for information, comments and inquiries about its products.

Address all correspondence to

Nordson Corporation

555 Jackson Street

Amherst, OH 44001

Notice

This is a Nordson Corporation publication which is protected by copyright. Original copyright date 1992. No part of

this document may be photocopied, reproduced, or translated to another language without the prior written consent

of Nordson Corporation. The information contained in this publication is subject to change without notice.

Trademarks

100 Plus, Blue Box, ChromaFlex, CleanSleeve, CleanSpray, Control Coat, Cross-Cut, Easy Coat, Econo-Coat,

Excel 2000, Flow Sentry, Isocoil, Isocore, Iso-Flo, Nordson, the Nordson logo, PRX, Pro-Flo, RBX, Ready-Coat,

Rhino, SCF, Select Coat, Select Cure, Shur-Lok, Smart Spray, System Sentry, Thread Coat, Tribomatic, and

Versa-Spray are registered trademarks of Nordson Corporation.

CPX, CanWorks, Excel 2000, PowderGrid, Pulse Spray, Versa-Coat, Versa Screen, Package of Values, and Swirl

Coat are trademarks of Nordson Corporation.

UNICARB is a registered trademark of Union Carbide Corporation.

OBSOLETE

Table of Contents

E1997 Nordson Corporation

Issued 1/97 Manual 4-26

Table of Contents

1. Safety 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Symbols 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Qualified Personnel 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Intended Use 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operation 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Less-Obvious Dangers 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Action in the Event of a System or Component Malfunction 8. . . . .

Maintenance and Repair 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Material and Solvent Precautions 10. . . . . . . . . . . . . . . . . . . . . . . . . .

Disposal 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Description 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The UNICARB System 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Theory of Operation 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Installation 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Operation 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Startup 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shutdown 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. Maintenance 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Daily 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Periodically 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. Troubleshooting 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. Repair 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Handgun Disassembly 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Handgun Reassembly 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. Parts 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Illustrated Parts List 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCF-M1 Handgun with Circulating Hose 28. . . . . . . . . . . . . . . . . . . .

SCF-M1 Gun with Non-Circulating Hose 30. . . . . . . . . . . . . . . . . . . .

OBSOLETE

Table of Contents

E1997 Nordson Corporation

108 236B

Issued 1/97

Manual 4-26

OBSOLETE

Model SCF-M1 Handgun

E1997 Nordson Corporation

Issued 1/97 Manual 4-26

Model SCF-M1 Handgun

This section contains general safety instructions for using your Nordson

equipment. Task- and equipment-specific warnings are included in other

sections of this manual where appropriate. Note all warnings and follow

all instructions carefully. Failure to do so may result in personal injury,

death, or property damage.

To use this equipment safely,

Sread and become familiar with the general safety instructions

provided in this section of the manual before installing, operating,

maintaining, or repairing this equipment.

Sread and carefully follow the instructions given throughout this manual

for performing specific tasks and working with specific equipment.

Sstore this manual within easy reach of personnel installing, operating,

maintaining, or repairing this equipment.

Sfollow all applicable safety procedures required by your company,

industry standards, and government or other regulatory agencies.

Refer to the National Fire Protection Association (NFPA) standard 33

and to federal, state, regulatory agency, and local codes for rules and

regulations covering installation and operation of spray systems.

Sobtain and read Material Safety Data Sheets (MSDS) for all materials

used.

Become familiar with the safety symbols presented in this section. These

symbols will alert you to safety hazards and conditions that may result in

personal injury, death, or property and equipment damage.

WARNING: Failure to observe this warning may result in

personal injury, death, or equipment damage.

1. Safety

Safety Symbols

OBSOLETE

Model SCF-M1 Handgun

1997 Nordson Corporation

108 236B

Issued 1/97

Manual 4-26

WARNING: Risk of electrical shock. Failure to observe this

warning may result in personal injury, death, or equipment

damage.

WARNING: Disconnect equipment from line voltage. Failure to

observe this warning may result in personal injury, death, or

equipment damage.

WARNING: Risk of explosion or fire. Fire, open flames, and

smoking prohibited.

WARNING: Wear protective clothing, safety goggles, and

approved respiratory protection. Failure to observe may result

in serious injury.

WARNING: Hot! Risk of burns. Wear heat-protective clothing,

safety goggles with side shields and/or heat-protective gloves

depending on the symbol shown.

WARNING: System or material pressurized. Relieve pressure.

Failure to observe this warning may result in serious injury

or death.

WARNING: Injection. Do not point this device at yourself or

other personnel. Failure to observe this warning may result in

serious injury or death.

Safety Symbols

(contd)

OBSOLETE

Model SCF-M1 Handgun

E1997 Nordson Corporation

Issued 1/97 Manual 4-26

CAUTION: Failure to observe may result in equipment

damage.

CAUTION: Hot surface. Failure to observe may result in

burns.

“Qualified personnel” is defined here as individuals who thoroughly

understand the equipment and its safe operation, maintenance, and

repair. Qualified personnel are physically capable of performing the

required tasks, familiar with all relevant safety rules and regulations, and

have been trained to safely install, operate, maintain, and repair the

equipment. It is the responsibility of the company operating this

equipment to see that its personnel meet these requirements.

WARNING: Use of this equipment in ways other than

described in this manual may result in personal injury, death, or

property and equipment damage. Use this equipment only as

described in this manual.

Nordson Corporation cannot be responsible for injuries or damages

resulting from nonstandard, unintended applications of its equipment.

This equipment is designed and intended only for the purpose described

in this manual. Uses not described in this manual are considered

unintended uses and may result in serious personal injury, death, or

property damage. Unintended uses may result from taking the following

actions:

Smaking changes to equipment that have not been recommended or

described in this manual or using parts that are not genuine Nordson

replacement parts

Sfailing to make sure that auxiliary equipment complies with approval

agency requirements, local codes, and all applicable safety standards

Susing materials or auxiliary equipment that are inappropriate or

incompatible with your Nordson equipment

Sallowing unqualified personnel to perform any task

Safety Symbols

(contd)

Qualified Personnel

Intended Use

OBSOLETE

Model SCF-M1 Handgun

E1997 Nordson Corporation

108 236B

Issued 1/97

Manual 4-26

Read the installation section of all system component manuals before

installing your Nordson equipment. A thorough understanding of system

components and their requirements will help you to install this equipment

safely and efficiently.

WARNING: Failure to follow these safety procedures can result

in personal injury or death.

SAllow only qualified personnel to install Nordson equipment.

SUse only approved equipment. Using unapproved equipment in an

approved system may void agency approvals.

SMake sure all equipment is rated and approved for the environment in

which you are using it.

SFollow all instructions for installing components and accessories.

SInstall all electrical, pneumatic, gas, and hydraulic connections to

local code.

SInstall locking, manual, shutoff valves in the air supply lines to the

system. This allows you to relieve air pressure and lock out the

pneumatic system before undertaking maintenance and repairs.

SInstall a locking disconnect switch or breaker in the service line ahead

of any electrical equipment.

SUse only electrical wire of sufficient gauge and insulation to handle

the rated current demand. All wiring must meet local codes.

SGround all electrically conductive equipment. Ungrounded

conductive equipment can store a static charge which could ignite a

fire or cause an explosion if a hot spark is discharged.

SRoute electrical wiring, electrostatic cables, and air hoses and tubing

along a protected path. Make sure they will not be damaged. Do not

bend electrostatic cables around a radius of less than 6 in. (152 mm).

SInstall safety interlocks and approved, fast-acting fire detection

systems. These shut down the spray system and any flammable

liquid supply if a ventilation or electrical problem occurs, a fire is

detected, or other emergency situation develops.

Installation

OBSOLETE

Model SCF-M1 Handgun

E1997 Nordson Corporation

Issued 1/97 Manual 4-26

SMake sure the spray area floor is conductive to ground and that the

operator’s platform is grounded.

SUse only designated lifting points or lugs to lift and move heavy

equipment. Always balance and block loads when lifting to prevent

shifting. Lifting devices must be inspected, certified, and rated for a

greater weight than the equipment being lifted.

SDo not use unapproved fluid hoses. Solvents may cause them to

deteriorate rapidly which may allow flammable or pressurized material

to escape.

SProtect components from damage, wear, and harsh environmental

conditions.

SAllow ample room for maintenance, material supply container drop-off

and loading, panel accessibility, and cover removal.

SProtect equipment with safety devices as specified by applicable

safety regulations.

SIf safety devices must be removed for installation, install them

immediately after the work is completed and check them for proper

functioning.

Only qualified personnel, physically capable of operating the equipment

and with no impairments to their judgement or reaction times, should

operate this equipment.

Read all component manuals before operating this equipment. A

thorough understanding of system components and their operation will

help you operate the system safely and efficiently.

SUse this equipment only in the environments for which it is rated. Do

not operate this equipment in humid, flammable, or explosive

environments unless it has been rated for safe operation in these

environments.

SBefore starting this equipment, check all safety interlocks,

fire-detection systems, and protective devices such as panels and

covers. Make sure all devices are fully functional. Do not operate the

system if these devices are not working properly. Do not deactivate

or bypass automatic safety interlocks, locked-out electrical

disconnects, or pneumatic valves.

Installation

(contd)

Operation

OBSOLETE

Model SCF-M1 Handgun

E1997 Nordson Corporation

108 236B

Issued 1/97

Manual 4-26

SKnow where

EMERGENCY

STOP

buttons, shutoff valves, and fire

extinguishers are located. Make sure they work. If a component

malfunctions, shut down and lock out the equipment immediately.

SBefore operating, make sure all conductive equipment, objects being

sprayed, and fluid containers are connected to a true earth ground.

SNever operate equipment with a known malfunction or leak.

SNever point handguns or applicator nozzles at yourself or other

persons.

SNever touch exposed electrical connections on equipment while the

power is ON.

SDo not operate the equipment at pressures higher than the rated

maximum working pressure of any component in the system.

SShut off moving equipment before taking measurements or inspecting

workpieces.

SKnow the pinch points, temperatures, pressures, and material

composition for all equipment that you are working with. Recognize

potential hazards associated with these and exercise appropriate

caution.

SWear shoes with conductive soles, such as leather, or use grounding

straps to maintain a connection to ground when working with or

around electrostatic equipment.

SDo not wear or carry metallic objects (jewelry or tools) while working

with or around electrostatic equipment. Ungrounded metal can store

a static charge and cause harmful shocks.

SMaintain skin-to-metal contact between your hand and the gun handle

to prevent shocks while operating manual electrostatic spray guns. If

wearing gloves, cut away the palm or fingers.

SShut off electrostatic power supplies and ground gun electrodes

before making adjustments to powder spray guns.

SIf you notice electrical arcing in a spray area, shut down the system

immediately. An arc can cause a fire or explosion.

SKeep parts of the body or loose clothing away from rotating parts.

Remove personal jewelry and cover or tie back long hair.

Operation

(contd)

Inhaltsverzeichnis

Andere Nordson Spritzpistole Handbücher

Nordson

Nordson Compact Manual Iso-Flo Voltage-Block Bedienungsanleitung

Nordson

Nordson Encore 1096694A Bedienungsanleitung

Nordson

Nordson Trilogy AAA Referenzhandbuch

Nordson

Nordson PRODIGY Referenzhandbuch

Nordson

Nordson A7AA Referenzhandbuch

Nordson

Nordson Vantage Referenzhandbuch

Nordson

Nordson ColorMax3 Bedienungsanleitung

Nordson

Nordson Encore HD Referenzhandbuch

Nordson

Nordson WM-1 Referenzhandbuch

Nordson

Nordson ColorMax 2 Bedienungsanleitung

Nordson

Nordson ColorMax Bedienungsanleitung

Nordson

Nordson A7A Referenzhandbuch

Nordson

Nordson Encore Bedienungsanleitung

Nordson

Nordson ColorMax Bedienungsanleitung

Nordson

Nordson Encore Referenzhandbuch

Nordson

Nordson Tribomatic II Referenzhandbuch

Nordson

Nordson Encore Referenzhandbuch

Nordson

Nordson Versa-Spray II Referenzhandbuch

Nordson

Nordson WM-1 Stücklistenhandbuch

Nordson

Nordson Tribomatic Magnum Bedienungsanleitung

Nordson

Nordson Encore HD Referenzhandbuch

Nordson

Nordson Encore Bedienungsanleitung

Nordson

Nordson Encore LT Referenzhandbuch

Nordson

Nordson A20A Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Graco

Graco 246737 Gebrauchs- und Pflegehandbuch

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

Conrad

Conrad Hobby Airbrush K3 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch