Nortel Secure Router 2330 Bedienungsanleitung

Nortel Secure Router 2330/4134

Installation — SFPs

Release: 10.2

Document Revision: 03.01

www.nortel.com

NN47263-303

Nortel Secure Router 2330/4134

Release: 10.2

Publication: NN47263-303

Document release date: 7 September 2009

While the information in this document is believed to be accurate and reliable, except as otherwise expressly

agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF

ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are

subject to change without notice.

Nortel, Nortel Networks, the Nortel logo, and the Globemark are trademarks of Nortel Networks.

THE SOFTWARE DESCRIBED IN THIS DOCUMENT IS FURNISHED UNDER A LICENSE AGREEMENT AND

MAY BE USED ONLY IN ACCORDANCE WITH THE TERMS OF THAT LICENSE.

All other trademarks are the property of their respective owners.

Contents

New in this release 5

Features 5

Other changes 5

Introduction 7

Navigation 7

Safety and equipment care information 9

Handling, safety, and environmental guidelines 9

Electrostatic discharge prevention 9

Care of fiber optic equipment 10

Fiber optic cable care 10

Fiber optic connector care 11

Cleaning single connectors 12

Cleaning duplex connectors 13

Cleaning receptacles 14

Product safety warnings and information 16

ESD and installation caution messages 16

Laser safety warnings 17

Small form factor pluggable transceivers 21

Selecting an SFP 21

Job aid 22

Installing an SFP 23

Job aid 24

Removing an SFP 25

SFP specifications 27

SFP labels 27

General SFP specifications 28

1000BASE-SX (LC) SFP specifications 28

1000BASE-SX (MT-RJ) SFP specifications 29

1000BASE-LX SFP specifications 30

1000BASE-XD CWDM SFP specifications 30

1000BASE-ZX CWDM SFP specifications 31

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

1000BASE-SX DDI SFP specifications 32

1000BASE-LX DDI SFP specifications 32

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

New in this release

See the following sections for details about what’s new in Nortel Secure

Router 2330/4134 Installation — SFPs (NN47263-303) for release 10.2.

Features No changes have been made to feature content for this release.

Other changes

This document is updated to include references to the new SR2330

hardware.

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

6New in this release

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

Introduction

This document provides information about small form-factor pluggable

(SFP) transceiver safety and care, SFP selection, and SFP installation.

It also includes SFP specifications.

Navigation •“Safety and equipment care information” (page 9)

•“Small form factor pluggable transceivers” (page 21)

•“SFP specifications” (page 27)

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

8Introduction

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

Safety and equipment care information

This section contains important safety and regulatory information.

Read this section before you install small form factor pluggable (SFP)

transceivers.

Navigation •“Handling, safety, and environmental guidelines” (page 9)

•“Care of fiber optic equipment” (page 10)

•“Product safety warnings and information” (page 16)

Handling, safety, and environmental guidelines

Before you install an SFP, read the following handling, safety, and

environmental guidelines:

•SFPs are static sensitive. For more information about how to prevent

damage from electrostatic discharge (ESD), see “Electrostatic

discharge prevention” (page 9).

•Dust contamination can reduce the performance of optical parts in

SFPs. When you store an SFP, or after you disconnect it from a fiber

optic cable, always keep a dust cover over the optical bore.

•Dispose of this product according to all national laws and regulations.

Electrostatic discharge prevention

To prevent equipment damage, observe the following electrostatic

discharge (ESD) precautions when you handle or install the components.

•Ground yourself and the equipment to an earth or building ground. Use

a grounded workbench mat (or foam that dissipates static charge) and

a grounding wrist strap. The wrist strap must touch the skin and be

grounded through a one megaohm resistor.

•Do not touch anyone who is not grounded.

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

10 Safety and equipment care information

•Leave all components in their ESD-safe packaging until installation,

and use only a static-shielding bag for all storage, transport, and

handling.

•Clear the area of synthetic materials such as polyester, plastic, vinyl, or

styrofoam because these materials carry static electricity that damages

the equipment.

Care of ﬁber optic equipment

You must keep fiber optic equipment connections clean and damage-free.

Use the information in this section to properly maintain and care for fiber

optic equipment.

Care of ﬁber optic equipment navigation

•“Fiber optic cable care” (page 10)

•“Fiber optic connector care” (page 11)

•“Cleaning single connectors” (page 12)

•“Cleaning duplex connectors” (page 13)

•“Cleaning receptacles” (page 14)

Fiber optic cable care

Although the glass fiber in fiber optic cable is protected with reinforcing

material and plastic insulation, it is subject to damage. Use the following

precautions to avoid damaging the glass fiber.

•Do not kink, knot, or vigorously flex the cable.

•Do not bend the cable to less than a 40 mm radius.

•Do not stand on fiber optic cable; keep the cable off the floor.

•Do not pull fiber optic cable harder than you do a cable containing

copper wire of comparable size.

•Do not allow a static load of more than a few pounds on a section of

the cable.

•Place protective caps on fiber optic connectors that are not in use.

•Store unused fiber optic patch cables in a cabinet, on a cable rack, or

flat on a shelf.

Frequent overstressing of fiber optic cable causes progressive

degeneration that leads to failure.

Nortel Secure Router 2330/4134

Installation — SFPs

NN47263-303 03.01 7 September 2009

Andere Handbücher für Secure Router 2330

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nortel Netzwerk-Router Handbücher

Nortel

Nortel 8300 Series Bedienungsanleitung

Nortel

Nortel 5500 series Abmessungen

Nortel

Nortel BayStack ARN Abmessungen

Nortel

Nortel 222 Bedienungsanleitung

Nortel

Nortel Secure Router 4134 Bedienungsanleitung

Nortel

Nortel 4500 Series Kurzanleitung

Nortel

Nortel business policy switch 2000 Bedienungsanleitung

Nortel

Nortel Passport 8600 Series Bedienerhandbuch

Nortel

Nortel Versalar 15000 Bedienungsanleitung

Nortel

Nortel BCM50e Kurzanleitung

Nortel

Nortel Integrated Conference Bridge Bedienungsanleitung

Nortel

Nortel 222 Bedienungsanleitung

Nortel

Nortel NN46205-310 Bedienungsanleitung

Nortel

Nortel 4500 Series Bedienungsanleitung

Nortel

Nortel 110-24T Bedienungsanleitung

Nortel

Nortel Passport 8600 Series Merkblatt

Nortel

Nortel 1700 Bedienungsanleitung

Nortel

Nortel NN46110-602 Betriebsanleitung

Nortel

Nortel Contivity 110 Beilage

Nortel

Nortel BCM50a Bedienungsanleitung

Nortel

Nortel VPN Router v7.05 Bedienungsanleitung

Nortel

Nortel 4050 Bedienungsanleitung

Nortel

Nortel BayStack 460-24T-PWR Bedienungsanleitung

Nortel

Nortel 8300 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise