Nuna KLIK plus Leitfaden
SEAT AND BASE MODEL CF05702
BASE ONLY IF05702
INSTRUCTIONS FOR
INSTALLATION
KLIK plus
IMPORTANT: KEEP THIS INSTRUCTION BOOKLET IN THE
PLACE PROVIDED ON THE CHILD RESTRAINT
IMG-0092B
1
INSTALLATION
DO NOT USE THIS CHILD RESTRAINT UNTIL YOU HAVE
READ AND UNDERSTOOD THE INSTRUCTIONS IN THIS
USER GUIDE AND IN YOUR VEHICLE OWNERS MANUAL
IMPORTANT:
Before installation and use of this child restraint
check that it is suitable for the size of your child.
IMPORTANT: This is a rear facing child restraint. Do not face forward.
Quick Reference .............................................................. 2
WARNINGS .................................................................... 3
Additional Warnings ................................................. 4 & 5
Features .......................................................................... 6
Installation - General ................................................. 7 & 8
Installation - Vehicle Belts ........................................ 9 - 11
Installation - ISOFIX Compatible Connectors ..........12 –16
Storage–ISOFIXCompatibleConnectors........................17
Fitting Restraint to Base.................................................18
WARNINGS – Tether Strap ............................................19
How to use the Tether Strap ................................... 20 - 22
Installation – Tether Anchorage............................... 23 - 25
Use with Strollers .......................................................... 26
Cleaning and Maintenance ........................................... 27
Contents
Distributed by Baby Bunting Pty. Ltd.
For after sales service, please contact:
APB Pty Ltd , 82 Bellingara Road, Miranda NSW 2228
Ph: 02 8543 5570
See page 7 of the USE Instructions
for more information.
32
INSTALLATION
INSTALLATION
Vehicle Belt (if used)
must always be secure
and pulled tight.
See pages 9 –11
Carry Handle
must always be locked
into position.
Tether Strap
must always be used when the
restraint is installed in a vehicle.
Store end of tether in bag.
See page 20 - 22
Base Recline Adjustment
base must be reclined correctly
See pages 7 & 8
Secure Latching
restraint must be
securely latched
into base.
See page 18
Read the whole of these instructions carefully and if there is
any doubt about the method of installation, consult the child
restraint manufacturer or agent, or a child restraint tting
station authorized by the relevant transport authority, or in New
Zealand an agent for the vehicle.
Quick Reference
•Use the restraint exactly as shown in the instructions.
• Fit the restraint firmly to the car seat.
• A loose harness or restraint is dangerous.
• Destroy the restraint if it has been in a severe crash,
even if no damage is visible.
• Do not alter or modify this restraint.
• Repairs must only be done by the manufacturer or
agent.
• DO NOT USE A REAR FACING CHILD RESTRAINT
WHERE AN AIRBAG IS FITTED IN FRONT OF THE
SEATING POSITION.
• Only use this restraint with the base it was supplied
with. If a second or replacement base is required it
must be a matching model number.
WARNING
NOTE: The warnings on these pages are those
required by the Australian and New Zealand Standard
AS/NZS 1754 for this type of child restraint. Other
warnings specic to this particular child restraint will
be found throughout these instructions.
IMPORTANT: After reading this Quick Reference read the
following instructions carefully.
54
INSTALLATION
INSTALLATION
TO BE USED WITH A LAP-SASH/LAP ONLY SEATBELT
OR ISOFIX LOW ANCHORAGES IN THE BACK OF MOST
CARS WITH FORWARD FACING SEATS.
This restraint is 700 mm long, 440 mm wide and 500 mm
high (with the handle down). Check the measurement
between the front of the seat back of the rear seat and all
front seats in the car in which the restraint is intended to
be used to ensure the space available is sufcient.
Seat belt extenders are not recommended if the car seat
belt is too short to secure the child restraint. If the car
seat belt is too short get advice from a child restraint tter
regarding use of these.
ADDITIONAL WARNINGS
Never install the Child Re-
straint in a seat with a front
airbag. DEATH or SERIOUS
INJURY may occur. Refer to
your vehicle Owners Manual
for airbag warnings and in-
formation.
Only install child restraint
in a forward facing vehicle
seat. Never install in a seat
that faces the rear or the
side of the vehicle.
This is a rearward facing
child restraint. Do not install
facing the side or forwards.
ADDITIONAL WARNINGS
Always check child restraint
to base connection.
CLICK
1
2
CHECK
500
76
INSTALLATION
INSTALLATION
INSTRUCTIONS
3
2
Features
1
4
10
8
7
1 Tether Strap
2 Child Restraint Release
Lever
3 Tether Strap Anchorage
4 Tether end storage
5 Vehicle Belt Lock-Off
6 Bubble Level Indicator
7 Instruction Manual
Storage
8 Recline Foot
9 ISOFIX connector
10 Recline Foot Fold Latch
11 ISOFIX connectors fold
latch
6
11
9 9
9
5
Where to install the child
restraint?
Only install the child re-
straint in a forward facing
vehicle seat.
Never install in a seat that
faces the rear or the side of
the vehicle.
Install in the rear seat, the
safest place is normally the
centre.
The base can be installed
on vehicles seats tted with
either a lap belt or a lap/
sash belt or ISOFIX anchor-
ages.
To install correctly the
vehicle must be on a level
surface.
IMPORTANT:
Correct position and
installation is essential
for your child's safety.
Installation - General
98
INSTALLATION
INSTALLATION
1
1 Position base on a
forward facing vehicle
seat.
Adjust base so bubble
is between the black
patches.
2 Use recline adjustment,
if needed, to achieve
correct angle for
installation.
Recline adjustment foot
snaps into position.
3 If the recline adjustment
foot does not give
sufcient recline, add a
folded towel or similar.
3
2
IMPORTANT:
Any extra padding
placed under the base
must be firmly folded so
that when the vehicle
belts are pulled up tight,
the base is secure.
Always secure the base
with a vehicle belt, even
when the restraint is not
fitted to it. An unsecured
base may be dangerous
in an accident or sudden
stop.
Installation — Vehicle Belts
REARWARD-FACING
BELT PATH
INSTALLED
BASE
Use the Belt Path
labels as a guide for
correct belt placement.
1110
INSTALLATION
INSTALLATION
3. Buckle the vehicle belt.
2. Open the belt lockoff
and place the shoulder
and lap belts across it.
4. Push the base into the
vehicle seat rmly Aand
pull the vehicle belts
tight B.
5. Hold vehicle belts tight
and engage the belt
lockoff.
"CLICK"
3
4
A
B
2
3. Vehicle belt is not
twisted.
4. Level indicator
bubble is fully in the
clear area.
2. Vehicle belt is tight.
2
Checklist — Vehicle Belt Installation
1. Vehicle Buckle
engaged.
1
5
4
3
BELTS MUST BE
TIGHT.
LOOSE BELTS ARE
DANGEROUS.
1. Place the base on the
vehicle seat and pass
the vehicle belt through
the openings in the base
labeled ‘BELT PATH’
1
Installation — Vehicle Belts
1312
INSTALLATION
INSTALLATION
ISOFIX
Typical marking showing
location of ISOFIX low
anchorage points.
Installation — ISOFIX
Compatible Connectors
LATCH
WARNING
IMPORTANT Do not attach the lower attachment
connectors of two separate child restraints to the
same ISOFIX low anchorage in your car.
Always attach the top tether strap to the child
restraint upper anchorage in your car.
Child restraint lower attachment connectors and the
ISOFIX low anchorages in your car are designed to
withstand only those loads imposed by a correctly
tted child restraint.
Some vehicles sourced from
the USA may be marked
LATCH.
ISOFIX and LATCH low
anchorage points are the
same.
Some vehicles are tted
with ISOFIX low anchorage
points.
These are are found at the
bottom of the back seat
backrest.
This child restraint has con-
nectors to attach to them.
If the ISOFIX low anchorage
points are not clearly vis-
ible the vehicle seat will be
marked with labels to show
their location.
If in doubt that the vehicle
is tted with such points
check the Vehicle Owners
Manual.
1514
INSTALLATION
INSTALLATION
1 Some models come with
guides for the ISOFIX
compatible connectors.
These are for use in cars
where the anchorage bar
is recessed a long way
into the seats.
Once tted they will
help guide the ISOFIX
compatible connector
into place.
2 To use:
• locate the position of
the ISOFIX low anchor-
age,
• slide the guide in until
it contacts the steel rod
• allow the guide to push
up until it is secure on the
steel rod.
1
Fit guide onto
steel rod
2
Installation — ISOFIX Compatible
Connector Guides
3 Pull the base back to en-
sure both lower connec-
tors are engaged.
A
1
1 Press the release buttons
A and swing the ISOFIX
compatible connectors
forward to their operat-
ing position.
2 Attach each connector to
the vehicle ISOFIX low
anchorages.
Before fitting see general installation instructions on
pages 7 & 8
3
2
2
1716
INSTALLATION
INSTALLATION
Checklist — ISOFIX Installation
1 Check the bubble level
indicator to see if recline
level is still correct.
Adjust if necessary.
2. Pull back to check
both sides are latched
securely.
2
2
Storage — ISOFIX
Compatible Connectors
Store the ISOFIX compatible
connectors by pressing the
release button under the
base and swinging them
back until they are snugly
alongside the base.
Release
Button
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Nuna Autozubehör Handbücher
Nuna
Nuna REBL PLUS Bedienungsanleitung
Nuna
Nuna pipa lite lx Bedienungsanleitung
Nuna
Nuna pipa icon Bedienungsanleitung
Nuna
Nuna rava Konfigurationshandbuch
Nuna
Nuna Sena Bedienungsanleitung
Nuna
Nuna Aace Bedienungsanleitung
Nuna
Nuna Prym Bedienungsanleitung
Nuna
Nuna Pipa TW 2 Bedienungsanleitung
Nuna
Nuna Pipa Series Bedienungsanleitung
Nuna
Nuna Bugaboo turtle Bedienungsanleitung
