Nuvap ProSystem N1 Bedienungsanleitung
Nuvap N1 is an innovative device for monitoring the air
quality in the environments where we live.
USER MANUAL
Caution: carefully read and keep this manual.
This guide can be viewed online and downloaded from our website
www.nuvap.com
Nuvap N1 User Manual
Rev 1.1 Februay 15th, 2016
3
TABLE OF CONTENTS
GETTING TO KNOW N1
What you need
Where positioning N1
p.4
p.8
p.31
p.32
p.33
1
2
4
6
7
8
INFORMATION ON PRODUCT COMPLIANCE
COPYRIGHT AND TRADEMARKS
TERMS AND CONDITIONS OF WARRANTY
5SAFETY
Safety precautions
Opeating imits
GENERAL MAINTENANCE
Cleaning
Backup battey
Life of N1
Assistance
3INSTRUCTIONS FOR USE
Types of voice alet: WARNING and DANGER
Types of ight signal
Opeating modes
Auto-test
Manual opeating testing
Reset
SETUP - Getting stated
p.10
p.22
p.25
4
1
GETTING TO KNOW N1
The contents of the box that you have just opened are the following:
N1
Kit for water analysis
Power adapter 5V
User manual
N1 is the first device specifically designed for monitoring the main
sources of indoor pollution that over time can harm the health of your
family.
Thanks to its sensors, Nuvap N1 is able to detect up to 24 different
paameters:
• High and low frequency electromagnetic fields
• Radon gas
• Ionizing adiation
• Wi-Fi
• Methane (CH4)
• Smoke/fire
• Air quaity (H2, LPG, Alcohol, NH3, Ethanol, Toluene, CO)
• Paticulate Matter
• Water quaity (Chlorine, Hardness, Akainity, Ph, Nitrite and Nitate)
• Noise pollution
• Tempeature
• Humidity
5
1
All data recorded by N1 can be viewed, at any time and wherever you
are, through Nuvap App and Nuvap Web platform.
This manual provides instructions for N1 setup and proper use.
6
In order to use N1 you need the following:
a Wi-Fi connection,
a smatphone or Android or iOS tablet,
a Nuvap account to view the measurements of your N1.
NOTE: In the absence of a Wi-Fi connection only N1 local alarm
functions can be available.
What you need
1
Warning: This device is designed for indoor use, like single residential
units / offices. It is not a measuring instrument and therefore cannot
be used to establish compliance according to the paameters set by
law with respect to the presence of environmental pollutants.
It does not replace professional measuring and technical suveys.
Touch key
Power button
5V DC Connector Test tubes with
water quaity kit
Status LED
7
1
N1 must be placed in rooms where you spend most of your time (living
room, kitchen, bedroom, office), away from electromagnetic sources
such as smat phones and cordless phones, TV, appliances and away from
sources of pollution produced locally, not to impair proper opeation.
It is also not recommended the positioning of N1 in environments with a
moisture content above 80% or in the presence of a lot of dust.
N1 does not need installation or hardware. It is designed to be easily
moved around, allowing you to monitor the levels of pollutants in your
home or working environment.
N1 is equipped with a battey that allows up to 3 hours of use, so as to
be placed tempoarily for specific measures in remote areas without
power supply or in areas other than your house.
Depending on the chaacteristics of the environment that you would
like to monitor (such as, for example, ceiling height, dwelling on seveal
loors, wall thickness, etc.). N1 may not detect a significant presence of
some paameters.
For more information about the optimal placement of N1 please visit
www.nuvap.com.
Where positioning N1
8
1. Remove N1 and the power adapter from the package.
2. Place N1 in the environment that you want to monitor.
(see Ch. 1, § WHERE POSITIONING N1).
3. Connect N1 to the power supply
Connect the adapter to N1 and inset the
plug into the electrical socket.
4. Push the power button
Switch on N1 by pressing the power button
located on the side of the device.
5. Download the APP and create
your NUVAP account
Before use, you need to download the App
from Apple StoreSM or Google PlayTM
and create your Nuvap Account.
6. Login from the APP
Enter the credentials of your Nuvap account.
7. Scan the QR CODE
located under your device.
8. Follow the easy steps guided by the App
to complete the setup.
2
SETUP - Getting stated
Code
Serial
MAC
Code
Serial
MAC
9
2
9. Now wait for the message: “Continuous measurement has stated”.
N1 has been properly setup and has just stated monitoring the
pollutants in your home or office.
10.Press the touch key to peform the
manual opeational test.
Press the touch key located on the top of
N1 and listen to the message:
“No pollutants were detected in the
monitored area”.
11.View all data monitored by your N1,
through Nuvap App, anytime
and anywhere you are.
Environmental conditions may change over time. A reliable
assessment of the quality of monitored environment requires the
use of N1 in continuous mode for a period of at least 30 consecutive
days. You will know about NUVAP QUALITY INDEX of the environment
where you live at any time through the App and Nuvap Platform
http://my.nuvap.com
For futher information or clarification, please visit our website
www.nuvap.com
10
3
INSTRUCTIONS FOR USE
N1 is a smat device, able to communicate with you with voice
messages, light signals and NUVAP App.
N1 is progammed to give two types of voice alarm, CAUTION and
DANGER, and five types of light signals through its LEDs: green, yellow,
red, blue and violet.
In the event that N1 detects the presence of pollutants at WARNING
or DANGER levels, in addition to sound an alarm locally, the device will
send you a notification through NUVAP App and Platform at the address
http://my.nuvap.com.
Wherever you are you will be so informed in real time about the quality
of the environment that you have chosen to monitor with N1.
Types of Voice Alarm: CAUTION and DANGER
N1 emits two types of voice alarm to repot increased levels of
pollutants monitored (see § GETTING TO KNOW N1): “WARNING” alarm
and “DANGER” alarm.
The “CAUTION” alarm is intended to warn about the aising of the
levels of one or more of the pollutants monitored before they reach the
danger threshold.
In this case, N1 emits the voice message: “Presence of (name of
pollutant)”.
N1 simultaneously emits a lashing yellow light
(see § below TYPES OF LIGHT SIGNALS).
Andere Handbücher für ProSystem N1
1
Inhaltsverzeichnis
Andere Nuvap Messgerät Handbücher
