NuVinci Harmony Bedienungsanleitung

NuVinci®Harmony™

NuVinci®Harmony™H|Sync™

AUG 2014

Gebrauchsanweisung

Gebruikershandleiding

Owner Manual

THE NUVINCI®HARMONY™AND HARMONY™H|SYNC™SYSTEMS

NuVinci Harmony and Harmony

H|Sync Intelligent Drivetrains

The NuVinci Harmony and Har-

mony H|Sync intelligent drivetrain

systems are the first continuously

variable automatic shifting systems

for bicycles.Each system combines

electronic shifting with the award-

winning NuVinci®N360™ CVP. The

NuVinci Harmony system has two

handlebar controller options, offer-

ing ultimate exibility and control.

The NuVinci Harmony H|Sync

system is integrated completely

with leading eBike drivetrain

systems, utilizing the eBike user

interface and allowing optimized

interaction between the eBike and

Harmony H|Sync shifting system.

The NuVinci CVP

The NuVinci technology is a

continuously variable planetary

(CVP) drivetrain offering an innite

number of ratios inside its wide

ratio range.

Ratio changes occur within the

hub smoothly via internals that are

sealed for life and maintenance-free.

In Automatic Mode, Harmony

automatically adjusts ratio to main-

tain the rider’s preferred cadence.

The rider can choose their ideal

cadence setting by rotating the

grip. The blue LED “RPM” display

indicates the cadence setting.

The Harmony Base Controller makes

automatic shifting as simple as press-

ing a button to choose your pedal

cadence. The cadence settings

(typically slow, medium or fast) are

preset by the eBike manufacturer

according to the bike and gearing

specication.

THE NUVINCI®HARMONY™SYSTEM

Note: The NuVinci CVP cannot

be shifted completely through

the ratio range when stationary. The

Harmony system will intelligently wait

for pedaling or wheel movement if

wide ratio changes are commanded

while stationary.

The Harmony Advanced Controller

offers both fully automatic and

manual shifting options. The rider

switches between “Automatic” and

“Manual” modes by pressing the

“Mode” Button on the Advanced

Controller housing.

Automatic Shift Mode

Faster

Pedal

Cadence

Setting

Slower Pedal Cadence Setting

Mode Button

Manual Shift Mode

Easier

Ratio for

Climbing

“Fast” Cadence Setting

“Medium” Cadence Setting

“Slow” Cadence Setting

Faster Ratio for Speed

Mode Button

In Manual Mode, the rider is able

to shift on their own with “ride by

wire” technology. Like the cable-shift

system, the steeper the orange “hill”

on the LED display, the easier the

ratio for climbing.

Harmony Advanced Controller

Harmony Base Controller

Recalibrating Harmony™

If system operation is inconsistent

or incorrect, your Harmony system

may need to be recalibrated.

To do this:

Turn system power on

Pedal the bicycle lightly

through the entire calibration

procedure (preferably on a

stand with the rear wheel off

the ground):

Advanced Controller: Hold

down the “Mode” Button

until the rear hub begins

shifting (5-7 seconds

typically), then release

the button.

Base Controller: Press and

hold the Top and Bottom

buttons simultaneously until

the rear hub begins shifting

(5-7 seconds typically), then

release the buttons.

Continue pedaling lightly while

the system shifts from “low” to

“high” ratio multiple times and

completes calibration.

Upgrading

If the rider wishes to upgrade

from the Base Controller to the

Advanced Controller at a later

date, it’s a simple “plug and play”

installation. Contact your dealer or

NuVinci for more details.

Troubleshooting

Contact your dealer if there are

questions as to how the Harmony

system operates for your bicycle.

Please visit our website for up-to-

date product and troubleshooting

information:

www.nuvinci.com/harmony

THE NUVINCI®HARMONY™SYSTEM

Mode Button

Top & Bottom Buttons

Harmony Base Controller

THE NUVINCI®HARMONY™H|SYNC™SYSTEM

Harmony H|Sync Automatic Shift Mode

In Automatic Mode, Harmony H|Sync automatically adjusts ratio to

maintain the rider’s preferred cadence.The rider can choose their

ideal cadence by operating the eBike user interface, as documented

in your eBike system manual.

Harmony H|Sync Manual Shift Mode

If supported by your eBike manufacturer, Manual Mode allows the

rider to shift on their own with “ride by wire” technology.The rider

can choose their ideal ratio by operating the eBike user interface,

as documented in your eBike system manual.

THE NUVINCI®HARMONY™H|SYNC™SYSTEM

Recalibrating Harmony H|Sync

If system operation is inconsistent or incorrect, your Harmony H|Sync

system may need to be recalibrated.

To do this:

Turn system power on

Pedal the bicycle lightly through the entire calibration procedure

(preferably on a stand with the rear wheel off the ground):

Initiate your eBike Harmony H|Sync calibration (reference your

eBike system manual for Harmony H|Sync calibration instructions)

Continue pedaling lightly while the system shifts from “low” to

“high” ratio multiple times and completes calibration.

Troubleshooting

Contact your dealer if there are questions as to how the Harmony

H|Sync system operates for your bicycle.

Please visit our website for up-to-date product and troubleshooting

information: www.nuvinci.com/hsync

BASIC MAINTENANCE AND CARE

Loosen and remove the axle

nuts (2) and the no-turn washers (3).

For rim and roller brake

applications, disconnect the

rear brake according to the

manufacturer’s instructions.

Remove the rear wheel.

Some bicycles may require rotat-

ing the CVP Axle and Harmony

or Harmony H|Sync Hub Interface

to allow removal of the bicycle

chain.

In some cases, it is easiest to

remove the chain from the front

chain ring to ease rear wheel

removal.

Disconnecting the

Rear Wheel

Switch eBike power “off” and

disconnect the eBike battery

(if possible).

Remove the Harmony or Har-

mony H|Sync Main Connector at

the rear wheel.

Grab the connector at the

ribbed location (1) and pull

lightly away from the

Harmony or Harmony H|Sync

Hub Interface.

Do not pull on the cable, only

at the ribbed connector half

as shown.

The connector supplies electri-

cal power to the Harmony or

Harmony H|Sync unit. Protect

the connector from water or

other conductive elements when

disconnected, as shock or dam-

age to the system could result.

BASIC MAINTENANCE AND CARE

Slide one no-turn washer (3)

onto each axle end. The serrations

of the no-turn washer must bear

against the dropout of the frame.

The rectangular boss must engage

the dropout of the frame.

Mount the axle nuts (2).

Tightening torque 30 – 40 Nm

(266-350 in-lbs).

For rim and roller brake

applications, connect the

rear brake according to the

manufacturer’s instructions.

Install the Harmony or Har-

mony H|Sync Main Connector

by lining up the arrows (5) and

carefully pressing together.

Fitting the Rear Wheel

Place the rear wheel into the

frame, making sure not to obstruct

or pinch the Harmony or Harmony

H|Sync wire harness and Main Con-

nector.

Orient the chain around the Har-

mony or Harmony H|Sync Hub

Interface and onto the sprocket.

In some cases, it is easiest to

remove the chain from the front

chain ring to ease rear wheel

installation.

Note location of wheel speed

sensor (4) at rear wheel—the

chain should not catch on this

sensor when tting the wheel.

5-6

Cleaning

Your NuVinci components are

sealed and well protected

from the external environment.

However, do not use water

under pressure (such as pressure

washers or water jets) for clean-

ing to prevent malfunctions due

to water penetration.

During the winter, you should

clean your bicycle in shorter

intervals so that winter road

salt cannot cause any damage.

Do not use aggressive cleaners.

Wear Parts

Handlebar grips, sprockets,

and bike chains are wear

parts. Please check these parts

regularly and replace them as

necessary.

Lubrication

The NuVinci CVP is provided

with permanent lubrication

and the CVP internals are

maintenance-free for the life of

the product.

The NuVinci CVP internal

freewheel mechanism is

serviceable.

Regular lubrication will extend

the chain’s service life.

Repair Work

Only a qualied bike dealer

should perform any necessary

work on the NuVinci CVP,

Harmony or Harmony H|Sync

systems.

Unauthorized work on your

NuVinci CVP, Harmony or

Harmony H|Sync system could

endanger you, and your war-

ranty may become void.

Please contact your qualied

bike dealer regarding any ques-

tions or problem you may have.

Additional Information

Refer to our web site for

additional service information

at www.nuvinci.com

THE NUVINCI®HARMONY™AND HARMONY™H|SYNC™SYSTEMS

Andere Handbücher für Harmony

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere NuVinci Fahrradzubehör Handbücher

NuVinci

NuVinci Harmony 330 Bedienungsanleitung

NuVinci

NuVinci N360 Bedienungsanleitung

NuVinci

NuVinci enviolo CT Bedienungsanleitung

NuVinci

NuVinci Harmony Bedienungsanleitung

NuVinci

NuVinci N170S Bedienungsanleitung

NuVinci

NuVinci Nfinity Series Bedienungsanleitung

NuVinci

NuVinci N170S Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung