NXP Semiconductors HC05E24 Bedienungsanleitung

M68HC05E24EM/D2

July 1994

HC05E24

EMULATOR MODULE

USER'S MANUAL

Revision 2.0

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Motorola reserves the right to make changes without further notice to any products herein to

improve reliability, function, or design. Motorola does not assume any liability arising out of

the application or use of any product or circuit described herein; neither does it convey any

license under its patent rights nor the rights of others. Motorola products are not designed,

intended, or authorized for use as components in systems intended for surgical implant into the

body, or other application in which the failure of the Motorola product could create a situation

where personal injury or death may occur. Should Buyer purchase or use Motorola products

for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims,

costs, damages, and expenses, and reasonable attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or

unauthorized use, even if such claim alleges that Motorola was negligent regarding the design

or manufacture of the part.

Motorola and the Motorola logo are registered trademarks of Motorola Inc.

Motorola Inc. is an Equal Opportunity/Affirmative Action Employer.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

CONTENTS

M68HC05E24EM/D2 iii MOTOROLA

CONTENTS

CHAPTER 1 INTRODUCTION ................................ ................ 1 - 1

1 . 1 Development Sy st em s ................................ .......................... 1 - 1

1 . 1 . 1 Motor o la Mod u lar Development S ys te m ( M M D S 0 5 ) .................... 1 - 1

1 . 1 . 2 M68 H C05E VS Evaluat i on Sy st em ( H C 0 5 E V S ) ......................... 1 - 2

1 . 2 E M La y ou t ................................ ................................ ...... 1 - 3

1 . 3 Con nec t ors P 4 a n d P 5 P i n Assi g nmen ts ................................ ...... 1 - 4

CHAPTER 2 MMDS05 CONFIGURATION AND OPERATION ........ 2 - 1

2 . 1 Set tin g E24E M Ju mp er H e a d e r s ................................ ............... 2 - 2

2 . 1 . 1 Fa c to ry T es t He ade r ( J 1 ) ................................ .................. 2 - 2

2 . 1 . 2 Re se t Sel e ct He ad er ( J 2 ) . ................................ ................. 2 - 3

2 . 1 . 3 Cl oc k So ur ce S e lec t h ea d er ( J 3 , J 4 ) ................................ ...... 2 - 3

2 . 1 . 4 Pla tfor m Bo ar d Se l ect H ea d er ( J 5 ) ................................ ....... 2 - 3

2 . 2 T h e Emulated M C U ................................ ............................ 2 - 4

2 . 2 . 1 MC6 8HC7 0 5E2 4 E mulation Limita t i o ns ................................ 2 - 5

2 . 2 . 2 MC6 8HC0 5E24 E m ulation Limitatio n s ................................ .. 2 - 5

2 . 3 Remai n ing Sy st em I n stallation ................................ ................ 2 - 6

CHAPTER 3 HC05EVS CONFIGURATION AND OPERATION ....... 3 - 1

3 . 1 Set tin g E24E M Ju mp er H e a d e r s ................................ ............... 3 - 1

3 . 1 . 1 Fa c to ry T es t He ade r ( J 1 ) . ................................ ................ 3 - 2

3 . 1 . 2 Re se t Sel e ct He ad er ( J 2 ) . ................................ ................. 3 - 2

3 . 1 . 3 Cl oc k Str etc h S ele c t He ade r ( J 3 , J 4 ) ................................ .... 3 - 3

3 . 1 . 4 Pla tfor m Bo ar d Se l ect H ea d er ( J 5 ) ................................ ....... 3 - 4

3 . 2 T h e Emulated M C U ................................ ............................ 3 - 4

3 . 2 . 2 MC6 8HC7 0 5E2 4 E mulation L i m i t a t i o n s ................................ . 3 - 4

3 . 2 . 3 MC6 8HC0 5E16 E m ulation Limitatio n s ................................ .. 3 - 4

3 . 3 E V S L i m i t a t i o n s ................................ ................................ . 3 - 5

3 . 4 Lo gic An a lyzer Co n nec t or P 1 ................................ .................. 3 - 6

3 . 5 Remai n ing Sy st em I n s t a l l a t i o n ................................ ................. 3 - 8

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

CONTENTS

M68HC05E24EM/D2 iv MOTOROLA

FIGURES

Figure Page

1 - 1 HC 05 E2 4 Emula tor Mod ule ................................ .................. 1 - 3

1 - 2 Con nec t ors P 4 a n d P 5 P i n Assi g nmen ts ................................ .... 1 - 4

3 - 1 Con nect or P 1 P i n Assig nmen t s ................................ .............. 3 - 7

TABLES

Table Page

2 - 1 M C U s a n d Per sonal ity F i l e s ................................ .................. 2 - 4

3 - 2 Lo gic An a lyzer Co n nec t or P 1 Sig na l D e s c r i p t i o n s ......................... 3 - 7

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

M68HC05E24EM/D2 1-1 MOTOROLA

CHAPTER 1

INTRODUCTION

This user's manual explains connection, configuration, and operation information specific to

the HC05E24EM Emulator Module (E24EM). The E24EM makes possible emulation and

debugging of target systems based on these microcontroller units (MCUs):

MC68HC705E24 MC68HC05E16

The E24EM can be part of two development systems. This chapter describes those systems

and explains the layout of the E24EM.

The factory installs an MC68HC705E24 resident MCU in the E24EM.

1.1 DEVELOPMENT SYSTEMS

Your E24EM can be part of two Motorola development tools: the HC05 Motorola Modular

Development System (MMDS05) or the M68HC05EVS Evaluation System (HC05EVS).

1.1.1 Motorola Modular Development System (MMDS05)

The MMDS05 is an emulator system that provides a bus state analyzer and real-time memory

windows. The unit's integrated design environment includes an editor, an assembler, user

interface, and source-level debug. A complete MMDS05 consists of:

•a station module — the metal MMDS05 enclosure, containing the control board and

the internal power supply. Most system cables connect to the MMDS05 station module.

(The cable to an optional target system, however, runs through an aperture in the station

module enclosure to connect directly to the emulator module.)

•an emulator module (EM) — such as the E24EM: a printed circuit board that

enables system functionality for a specific set of MCUs. The EM fits into the station

module through a sliding panel in the enclosure top. The EM has a connector for the

target cable.

•two logic clip cable assemblies — twisted-pair cables that connect the station

module to your target system, a test fixture, a clock, or any other circuitry useful for

evaluation or analysis. One end of each cable assembly has a molded connector, which

fits into station-module pod A or pod B. Leads at the other end of each cable terminate

in female probe tips. Ball clips come with the cable assemblies.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

M68HC05E24EM/D2 1-2 MOTOROLA

•a 9-lead RS-232 serial cable — the cable that connects the station module to the

host computer RS-232 port.

•a 9- to 25-pin adapter — a molded assembly that lets you connect the 9-lead cable to

a 25-pin serial port.

•system software — software, on 3-1/2 inch diskettes.

•MMDS05 documentation — an MMDS05 operations manual (MMDS05OM/D) and

the appropriate EM user's manual.

As mentioned, your E24EM gives the MMDS05 the ability to emulate the

MC68HC(7)05E24/16 MCU. By substituting a different EM, you can enable your MMDS05

to emulate an MCU of a different series. (Your Motorola representative can explain all the EMs

available.)

Chapter 2 explains how to configure and use your E24EM as part of an MMDS05 system. For

information about MMDS05 software or the station module, see the MMDS05 operations

manual. For layout and configuration information pertaining to a different EM, see the

corresponding EM user's manual.

1.1.2 M68HC05EVS Evaluation System (HC05EVS)

An HC05EVS is an economical, two-board tool for designing, debugging, and evaluating

target systems based on an MC68HC05 MCU. A complete HC05EVS consists of:

•a platform board (PFB) — the bottom board, which supports the emulator module.

The platform board has connectors for power and for the terminal or host computer.

•an emulator module (EM) — such as the F4EM: a printed circuit board that enables

system functionality for a specific set of MCUs. The EM fits onto the PFB. The EM

has connectors for a target cable and for a cable to a logic analyzer.

•an RS-232 serial cable — the cable that connects the PFB to the host computer RS-

232 port.

•system software — software, on 3-1/2 inch diskettes.

•HC05EVS documentation — an HC05EVS operations manual (HC05EVSOM/D)

and the appropriate EM user's manual.

As mentioned, your HC05E24 EVS emulates the MC68HC705E24 and the MC68HC05E16

MCUs. By substituting a different EM, you can enable your HC05EVS to emulate an MCU of

a different series. (Your Motorola representative can explain all the EMs available.)

Chapter 3 explains how to configure and use your E24EM as part of an HC05EVS system.

For information about HC05EVS software or the platform board, see the HC05EVS operations

manual. For layout and configuration information pertaining to a different EM, see the

corresponding EM user's manual.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

M68HC05E24EM/D2 1-3 MOTOROLA

1.2 EM LAYOUT

Figure 1-1 shows the layout of the E24EM. Jumper header J1 selects factory test or user

mode. J2 controls the path of a target reset. J3 and J4 allow the clock source to be selected. J5

selects between MMDS05 and EVS operation.

Connector P1 is for a logic analyzer. (Connector P1 has more significance for an EVS system,

as an MMDS05 system includes a bus analyzer.) Expansion header connectors P2 and P3

connect together the EM and the control board (for an MMDS05) or the EM and the platform

board (for an EVS). Finally, Connectors P4 and P5 allow for connection of a target cable

which is available separately. If you install the E24EM board in the MMDS05, the target cable

passes through a slit in the MMDS05 enclosure.

P3P2

P1 J2

M68HC05E24EM

Figure 1-1. HC05E24 Emulator Module

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

M68HC05E24EM/D2 1-4 MOTOROLA

1.3 CONNECTORS P4 AND P5 PIN ASSIGNMENTS

Figure 1-2 shows the pin assignments for connectors P4 and P5. For signal descriptions,

consult the technical data book for the specific MCU.

PA6

PA4

PF0

N.C.

PE5

PA2

PA0

PB6

PB4

PB2

PB0

PE2

N.C.

IRQ0

LVI

OSC1

N.C.

Connector P4 Connector P5

PA7

PA5

PA3

PE7

PE6

PE4

PA1

PB7

PB5

PB3

PB1

PE3

PE1

PE0

IRQ1

N.C.

CLKOUT

XOSC1

N.C.

PC7

PC5

N.C.

PC3

PC1

PD0

PD2

PD4

PD6

PF6

PF4

PF2

VSS

PG0

VREFH

RESET

N.C.

PC6

N.C.

PC4

PC2

PC0

PD1

PD3

PD5

PD7

PF5

PF3

PF1

VREFL

PG1

VDD

Figure 1-2. Target Connector

As connector P1 has more importance to an HC05EVS than to an MMDS05, pin assignments

for connector P1 are in Chapter 3.

To configure your E24EM for use as part of an MMDS05, follow the instructions of Chapter

2. To configure your E24EM for use as part of an HC05EVS, follow the instructions of

Chapter 3.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MMDS05 CONFIGURATION AND OPERATION

M68HC05E24/D2 2-1 MOTOROLA

CHAPTER 2

MMDS05 CONFIGURATION AND OPERATION

This chapter explains how to configure and use your E24EM as part of an MMDS05. For

other parts of system installation or configuration, see the MMDS05 operations manual

(MMDS05OM/D). (If you intend to use your E24EM as part of an HC05EVS system, go to

Chapter 3 for corresponding information.)

Paragraph 2.1 explains how to set E24EM jumper headers. Paragraph 2.2 explains

considerations pertaining to the MCU you emulate. Paragraph 2.3 explains remaining system

installation.

Note that you can configure a E24EM already fitted in the MMDS05 station module enclosure.

To do so, switch off station-module power, remove the top panel, then follow the guidance of

this chapter.

CAUTION

Be sure to switch off power if you reconfigure an installed EM. Reconfiguring

EM jumper headers with power left on can damage MMDS05 circuits.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MMDS05 CONFIGURATION AND OPERATION

M68HC05E24/D2 2-2 MOTOROLA

2.1 SETTING E24EM JUMPER HEADERS

Your E24EM has five jumper headers, J1 to J5. This section explains how to configure these

headers.

2.1.1 Factory Test Header(J1)

Jumper header J1 is used for factory test purposes only. The fabricated jumper installed

between pins 2 and 3 is the only correct configuration for this header.

123

FABRICATED

JUMPER

FABRICATED

JUMPER

FABRICATED

JUMPER

User

Factory

Test

2.1.2 Reset Select Header (J2)

Jumper header J2 controls the path of a target reset. The diagram below shows the factory

configuration: the fabricated jumper between pins 1 and 2 enables your software to control

resets. This is the only correct J2 configuration for a E24EM that is part of an MMDS05.

123

FABRICATED

JUMPER

FABRICATED

JUMPER

FABRICATED

JUMPER

EVS Target

NOTE: Using the E24EM with the fabricated jumper installed between pins 2 and 3 will

interfere with correct operation of the RESETIN and RESETOUT commands. The J2 pins 2-

and-3 configuration is not correct for a E24EM that is part of an MMDS05 system.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Inhaltsverzeichnis

Andere NXP Semiconductors Steuereinheit Handbücher

NXP Semiconductors

NXP Semiconductors TWR-RF-SNAP Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Freescale MC9S12C32 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors PN544 C2 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-K64F120M Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-PROTO Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors M68EM05F4 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-LS1021A Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors freescale TWR-MCF51JG Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors PMSMMCXN9XXEVK Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors A3M36SL039I Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors freescale TWR-TWRPI-BD Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-SER2 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors MC56F8013 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Freescale TWR-WIFI-GS1500M Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors LPC54018 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors freescale TWR-S08PT60 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Digital DNA MSC8102 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors PX series Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-56F8400 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors OM27642 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-MCF5441X Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-KL43Z Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors freescale TWR-56F8200 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors i.MX8 QM Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung