Oase Complete Filter Kit 1300 Bedienungsanleitung

Complete Filter Kit 1300

Operating instructions

Notice d’emploi

Instrucciones de uso

- English -

REMINDER

CALL 1-866-627-3435

BEFORE RETURNING TO STORE.

Part Description QTY

A Filter housing 1

B stepped hose adapter with O ring 1

CNozzle tube with ow control 1

D fountain nozzles 4

E Diverter valve 1

Information about these operating instructions

Welcome to OASE Living Water. You made a great choice with the purchase of this product Complete Filter Kit 1300.

Prior to operating the unit, please read the instructions of use carefully and fully familiarise yourself with the unit. Ensure

that all work on and with this unit is only carried out in accordance with these instructions. Please strictly follow the

enclosed instructions to ensure safe and correct handling of the product. Keep these instructions in a safe place. Please

also hand over the instructions when passing the unit on to a new owner.

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

- English -

WARNINGS AND CAUTIONS SYMBOLS

Symbols used in these instructions

The symbols used in this operating manual have the following meanings:

Risk of injury to persons due to dangerous electrical voltage.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Risk of personal injury caused by a general source of danger.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Important! The unit is equipped with a permanent magnet. The magnetic eld may affect the function of pacemakers.

Important information for trouble-free operation.

Intended use

Complete Filter Kit 1300, referred to in the following as “unit”, may only be used as specied in the following:

• For cleaning garden ponds.

• For operation with clean water.

• Operation under observance of the technical data.

The following restrictions apply to the unit:

• Do not use in swimming pools.

• Never use the unit to convey uids other than water.

• Never run the unit without water.

• Do not use for commercial or industrial purposes.

• Do not use in conjunction with chemicals, foodstuff, easily ammable or explosive substances.

Use other than that intended

This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance

with these instructions or modication(s) to the unit will void the limited warranty.

- English -

6.6 ft.

maximum

Installation

1. Attach the stepped hose adapter with O ring 12x4 to the

lter kit rst, then connect tubing to the adapter.

NOTE: Tubing is NOT INCLUDED.

● Connect the tubing to desired water feature or spitter.

2. Place the unit in the pond as horizontal as possible on

rm, sludge-free ground and ensure that it is completely

covered with water at a maximum of 6.6 feet below the

surface of the water.

For installation using the stepped hose adapter

●For maximum water ow, it is recommended that the

largest tubing size for your pump is used.

Important:

● The unit can be used with the following:

○ With the stepped hose adapter for feeding a small waterfall or water feature.

○ With the nozzle set to create various fountain displays.

○ With the diverter valve, allowing an additional water feature to be operated simultaneously

with the fountain nozzle.

● It is recommened to place the unit horizontally on the ground ensuring its stable position.

● Do not lift the unit by its power cord.

● The unit’s lter foam, biomedia, pebbles and pump are preinstalled in the lter housing.

Tubing

Adapter

Filter kit

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

- English -

6.6 ft.

maximum

1. Attach the nozzle tube with diverter valve to the lter kit.

2. Connect the desired fountain nozzle to the nozzle tube.

○ The nozzle tube is equipped with a telescopic function for

individual height adjustment.

If NOT using the diverter valve

3. Turn the diverter valve ow control completely

counterclockwise to a vertical position.

If using the diverter valve

3. Connect tubing to the diverter valve and then connect

the tubing to the additional water feature.

○ Turn the diverter valve ow control to adjust the ow to the

water feature.

NOTE: Tubing is NOT INCLUDED.

4. Place the unit in the pond as horizontal as possible on rm,

sludge-free ground and ensure that it is completely covered

with water at a maximum of 6.6 feet below the surface of the

water.

○ The nozzle tube with diverter valve is equipped with a 360°

pivoting base. If the pond ground is uneven, tilt the nozzle

tube to achieve a more vertical fountain display if a level

surface cannot be achieved.

Installation (cont.)

For installation using the nozzle set

360° pivoting base

nozzle tube

fountain nozzle

diverter valve

Filter kit

tubing

water feature

stops ow to the

diverter valve

ow control

- English -

Start-up

Attention! The pump must never run dry.

Possible consequences: The pump will be destroyed.

Protective measures: Check the water level at regular intervals. Always place the unit below water level.

Attention! The installed temperature sensor automatically turns the pump off, if it is overloaded. The pump

automatically switches on again once the motor has cooled down. Risk of accident!

Install the unit so that it is not exposed to direct sun radiation (max. 104 ºF - 40 ºC).

Attention! Sensitive electrical components.

Possible consequence: The unit will be destroyed.

Protective measure: Do not connect the unit to a dimmable power supply.

WARNING

Risk of electric shock – This pump is supplied with a grounding conductor and grounding-type attachment plug. To

reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type

receptacle.

Important:

● The unit switches on automatically when power connection

is established.

1. Switching on: Connect power plug to the socket.

2. Turn the ow control to adjust the ow to the

fountain display.

3. Switching off: Disconnect the power plug.

Maintenance and cleaning

Attention! Dangerous electrical voltage.

Possible consequences: Death or serious injuries.

Protective measures:

• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the

units and installations (switch off and disconnect from the power supply) before reaching into the water.

• Isolate the unit before starting any work.

• Secure the unit to prevent unintentional switching on.

WARNING

This pump uses a very strong magnet to achieve superior performance. When removing the impeller assembly there

will be considerable magnetic force resisting the extraction of the impeller assembly. This is normal. Likewise when

replacing the impeller assembly there will be a strong magnetic force pulling the assembly into the pump to potentially

cause injury to ngers and in rare cases damaging the ceramic shaft or rear bearing. Use thick gloves when replacing

the impeller assembly.

Cleaning the unit

● Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface

or impair the function.

● Recommended cleaning agent for removing stubborn limescale deposits: Vinegar and chlorine-free

household cleaning agent.

● After cleaning, thoroughly rinse all parts in clean water.

● Recommendation on regular cleaning. Clean the pump at least twice a year.

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

- English -

Cleaning the pump, lter foam and biomedia

5. Unscrew the pump lid or the pump housing and remove

the impeller.

6. Use a brush to clean the impeller and the inside of the

pump housing.

7. Rinse the lter foam, gravel bags and biomedia under

running water.

● Check parts for damages such as cracked rotor,

cracks in the magnet, and broken plastics. Replace

parts if necessary.

8. Reassemble in the reverse order.

Maintenance and cleaning (cont.)

Disassembling the unit

1. Disconnect the pump from the power source

○ Disconnect any tubing.

2. Unscrew the nozzle tube and diverter valve or stepped

hose adapter from the lter kit.

3. Open the engagement hooks on both sides of the lter

housing and remove the top strainer casing.

4. Remove the top lter foam, the pump, the lter foam,

and the gravel bags and biomedia from the bottom

strainer casing.

- English -

Storage/Winterization

● Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are

to be expected.

● Thoroughly clean the unit, check for damage.

● Store immersed in water or lled with water. Do not immerse the power plug in water!

● Ensure that the storage place is inaccessible to children.

Wear parts

The lter foam and impeller is a wear part and is excluded from the warranty.

Disposal

Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further

information about the recycling of this product can be obtained from your local municipal authority.

Issue Cause Solution

The unit is not

operating

Power supply not connected Connect pump power supply

Pump is not completely submerged Completely submerge pump in the water

Insufcient ow Filter housing clogged Clean

Tubing blocked Clean or replace tubing

Tubing kinked Eliminate kink, replace tubing if it is damaged

Excessive ow loss in the

tubing due to friction

Reduce tubing length to reduce frictional loss

Impeller blocked Clean impeller

Unit switches

off after a short

running period

Pump running dry ○ Check supply lines for blockages

○ Vent tubing

○ Check connections for leaks

Water temperature too high Maximum water temperature: +95 F° (+35 °C)

Troubleshooting

- Français -

Pièce Description Quant.

ABoîtier de ltre 1

BEmbout universel avec joint torique 1

CRallonge de buse avec contrôle du débit 1

D Buses 4

EVanne directionnelle 1

Informations sur le mode d’emploi

Bienvenue à OASE Living Water. L’achat de votre Kit de Filtre complet 1300 constitue un excellent choix. Avant d’utiliser

l’appareil, lisez les instructions attentivement et familiarisez-vous parfaitement avec l’appareil. Assurez-vous que tout travail

effectué sur cet appareil et toute utilisation sont conformes aux instructions qui suivent. Suivez ces instructions à la lettre

an de vous assurer d’une manutention de l’appareil adéquate et sans risque. Conservez ces instructions dans un endroit

sûr et remettez-les au nouveau propriétaire si vous transmettez l’appareil.

RAPPEL

APPELEZ LE 1-866-627-3435

AVANT DE RETOURNER AU MAGASIN.

Inhaltsverzeichnis

Sprachen:

Andere Oase Wasserfiltersystem Handbücher

Oase

Oase BioTec ScreenMatic2 18000 Bedienungsanleitung

Oase

Oase BioTec Premium 80000 Bedienungsanleitung

Oase

Oase SwimSkim Bedienungsanleitung

Oase

Oase Filtoclear 3000 Bedienungsanleitung

Oase

Oase BioSmart 36000 Bedienungsanleitung

Oase

Oase Vitronic 9 Bedienungsanleitung

Oase

Oase Bitron Eco 120W Leitfaden

Oase

Oase Bitron 550 LM Bedienungsanleitung

Oase

Oase Filtoskim 12000 Bedienungsanleitung

Oase

Oase FiltoMatic CWS 7000 Bedienungsanleitung

Oase

Oase FiltoClear 5000 Bedienungsanleitung

Oase

Oase Filtral 5000 UVC Bedienungsanleitung

Oase

Oase Filtral UVC 1500 Leitfaden

Oase

Oase BioPress 4000 Bedienungsanleitung

Oase

Oase Bitron 36C Bedienungsanleitung

Oase

Oase Filtoclear Bedienungsanleitung

Oase

Oase Aquarius Eco Expert 22000 Bedienungsanleitung

Oase

Oase BioPlus Series Bedienungsanleitung

Oase

Oase StreamMax Classic 2000 Bedienungsanleitung

Oase

Oase Vitronic 24 W Bedienungsanleitung

Oase

Oase BioSmart 5000 Bedienungsanleitung

Oase

Oase Filtral 2500 UVC Bedienungsanleitung

Oase

Oase Filtral UVC 400 Bedienungsanleitung

Oase

Oase BioSmart 1600 Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung