Oase Vitronic 9 Bedienungsanleitung

Vitronic 9 / 18 / 36

Operating instructions

Notice d’emploi

Instrucciones de uso

- English -

REMINDER

CALL 1-866-627-3435

BEFORE RETURNING TO STORE.

Part Description QTY

A Unit head 1

B Casing 1

C Black stepped hose adapter with O ring (Vitronic 9W only) 2

DTransparent stepped hose adapter with union nut and at seal (Vitronic 18W / 36W only) 2

E UVC lamp 1

FHose clamp (Vitronic 18W / 36W only) 2

GHose clamp (Vitronic 18W / 36W only) 2

Information about these operating instructions

Welcome to OASE Living Water. You made a great choice with the purchase of this product Vitronic 9W / 18W / 36W. Prior

to operating the unit, please read the instructions of use carefully and fully familiarise yourself with the unit. Ensure that

all work on and with this unit is only carried out in accordance with these instructions. Please strictly follow the enclosed

instructions to ensure safe and correct handling of the product. Keep these instructions in a safe place. Please also hand

over the instructions when passing the unit on to a new owner.

Vitronic 9W

Vitronic 18W / 36W

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

WARNINGS AND CAUTIONS SYMBOLS

Symbols used in these instructions

The symbols used in this operating manual have the following meanings:

Risk of injury to persons due to dangerous electrical voltage.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Risk of personal injury caused by a general source of danger.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Important! The unit is equipped with a permanent magnet. The magnetic eld may affect the function of pacemakers.

Important information for trouble-free operation.

Intended use

Vitronic 9W / 18W / 36W, referred to in the following as “unit”, may only be used as specied in the following:

• For cleaning garden ponds.

• For operation with clean water.

• Operation under observance of the technical data.

The following restrictions apply to the unit:

• Do not use in swimming pools.

• Never use the unit to convey uids other than water.

• Never run the unit without water.

• Never operate the UVC lamp outside the casing or use it for any other purposes. The UVC radiation is harmful to

the eyes and skin even in small doses.

• Do not use for commercial or industrial purposes.

• Do not use in conjunction with chemicals, foodstuff, easily ammable or explosive substances.

• Do not connect to the domestic water supply.

Use other than that intended

This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance

with these instructions or modication(s) to the unit will void the limited warranty.

- English -

Installation

Important:

●Only install the unit in the permitted positions to ensure fault-

free operation.

● Do not lift by its power cord.

● Install the unit at least 6.6 ft (2 m) from the edge of the pond.

● Allow sufcient space for carrying out maintenance work.

Connect the unit

● Use hoses that are suitable for a pressure of at least

14.5 psi (1 bar).

1. For maximum water ow, it is recommended that the

largest tubing size for your pump is used.

○ If needed, cut the adapter as shown using a hacksaw;

consult packaging for tubing size.

2. Connect the stepped hose adapter with seal to the casing.

○ Connect the inlet and outlet.

○ Hand tighten the stepped hose adapter.

3. Connect tubing to the adapter. Secure with a hose clamp.

○ In the case of a stepped hose adapter with separate

union nut, rst push the union nut over the hose.

NOTE: Tubing is NOT INCLUDED.

Mounting the unit - optional

● For the Vitronic 9W, the unit head is removed

rst. (See P.7 for Removing the unit head)

1. Place the unit on the mounting surface.

○Carefully tighten all screws.

● After mounting the Vitronic 9W, reconnect the

unit head. (See P.7 for Fitting the unit head)

Vitronic 9W

Vitronic 18W / 36W

Vitronic 9W

Vitronic 18W / 36W

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

Connect the unit to the ow-through lter (Vitronic 18W / 36W only)

Installation (cont.)

Important:

● The unit is suitable for connection to ow-through lters.

Both outlet sockets are screwed to the inlet nozzles on the

ow-through lter. Adhere to the instructions for use of the

ow-through lter.

1. Unscrew the cover cap.

2. Guide the outlet sockets with at seal through both holes in

the container wall of the ow-through lter.

3. Screw the inlet nozzle with O ring onto the outlet socket and

hand tighten.

4. Connect tubing to the adapter. Secure with a hose clamp.

○ In the case of a stepped hose adapter with separate

union nut, rst push the union nut over the hose.

NOTE: Tubing is NOT INCLUDED.

- English -

Start-up

Attention! Dangerous electrical voltage.

Possible consequences: Death or serious injuries.

Protective measures:

• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the

units and installations (switch off and disconnect from the power supply) before reaching into the water.

• Isolate the unit before starting any work.

• Secure the unit to prevent unintentional switching on.

Important:

● The unit switches on automatically when power connection is

established.

● Switch the pump on rst, then switch on the UV clarifying unit.

● Check all connections for leaks.

1. Switching on: Connect power plug to the socket.

2. Switching off: Disconnect the power plug.

Check the function (Vitronic 9W)

● The function display is lit when the UVC lamp is switched on.

Check the function (Vitronic 18W / 36W)

● The transparent stepped hose adapters are lit when the UVC

lamp is switched on.

Maintenance and cleaning

Attention! Dangerous electrical voltage.

Possible consequences: Death or serious injuries.

Protective measures:

• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the

units and installations (switch off and disconnect from the power supply) before reaching into the water.

• Isolate the unit before starting any work.

• Secure the unit to prevent unintentional switching on.

Attention! Ultra-violet radiation.

Possible consequences: Eye or skin injury from burns.

Protective measures:

• Never operate the UVC lamp outside its housing.

• Never operate the UVC lamp in a housing that is defective.

Attention! Breakable glass.

Possible consequences: Injury to your hands caused by cuts.

Protective measures: Handle the quartz glass and UVC lamp with care.

Vitronic 9W

Vitronic 18W / 36W

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

Removing the unit head

1. Disconnect the pump from the power source.

○ Disconnect the tubing.

Vitronic 9W

2. Turn the unit head counter-clockwise up to the stop and

carefully pull it out of the casing together with the O ring.

○ Thoroughly clean the inner and outer surfaces of the

casing.

Vitronic 18W / 36W

2. Press the engagement hooks.

3. Turn the unit head counter-clockwise as far as the stop

and carefully pull it out of the casing.

○ Thoroughly clean the inner and outer surfaces of the

casing.

Maintenance and cleaning (cont.)

2. Vitronic 9W

● Do not use aggressive cleaning agents or chemical

solutions as they could attack the housing or impair the

functionof the unit.

● Recommended cleaning agent for removing stubborn

limescale deposits: Vinegar and chlorine-free household

cleaning agent.

● After cleaning, thoroughly rinse all parts in clean water.

Vitronic 18W / 36W

Note!

For safety reasons the UVC lamp can only be switched on when the unit head

has been correctly fitted into the casing.

Fitting the unit head

1. Check the O ring at the unit head for correct seating.

○ Clean the O ring, replace if damaged.

2. Carefully push the unit head into the casing up to the

stop while applying slight pressure.

○ Turn the unit head slightly so that the tenons and

grooves of the bayonet closure intermesh.

3. Turn the unit head clockwise up to the stop.

○ For Vitronic 9W only the two arrows on the casing

and unit head must point towards one another.

Vitronic 9W

Vitronic 18W / 36W

- English -

Maintenance and cleaning (cont.)

● Remove unit head. (See P.7 for Removing the unit head)

1. Loosen the self-tapping screw until the the screw tip is sunk in

the housing of the clamping screw

○ Thoroughly clean the inner and outer surfaces of the

casing.

2. Unscrew the clamping screw counter-clockwise

3. Remove the quartz glass including the O ring towards the front

with a slight turning movement.

4. Pull out the UVC lamp and replace.

5. Push the quartz glass including the O ring as far as the stop in

the unit head.

○ Clean the O ring, replace if damaged.

○ Ensure that the O ring is located in the gap between the unit

head and the quartz glass.

6. Tighten the clamping screw clockwise up to the stop.

7. Tighten the self-tapping screw.

8. Wipe the quartz glass tube with a damp cloth

Cleaning the quartz glass / Replacing the UVC lamp

Attention! Breakable glass.

Possible consequences: Injury to your hands caused by cuts.

Protective measures: Handle the quartz glass and UVC lamp with care.

Replace the UVC lamp after max. 8,000 operating hours (this corresponds to

approx. one pond season with continuous operation). This ensures optimum

ltering performance.

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

Storage/Winterization

● Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are

to be expected.

● Thoroughly clean the unit, check for damage.

● Store immersed in water or lled with water. Do not immerse the power plug in water!

● Ensure that the storage place is inaccessible to children.

Wear parts

UVC lamp, quartz glass and O ring for quartz glass are wear parts and are excluded from the warranty.

Disposal

Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further

information about the recycling of this product can be obtained from your local municipal authority.

Issue Cause Solution

UVC lamp is

not lit

Power supply not connected Connect pump power supply

UVC lamp defective Replace the UVC lamp

The performance

of the unit is not

satisfactory

The water is extremely soiled Remove algae and leaves from the pond, change the water

The quartz glass is soiled Clean the quartz glass

Flow rate is too high Reduce the pump output

The UVC lamp capacity is

exhausted

The lamp must be replaced after 8000 operating hours

Troubleshooting

- Français -

Pièce Description Quant.

A Tête de l’appareil 1

B Boîtier 1

C Embout universel noir avec joint torique (Vitronic 9W) 2

DEmbout universel transparent avec l’écrou-raccord et joint plat (Vitronic 18W / 36W) 2

E Lampe UVC 1

FCollier de serrage (Vitronic 18W / 36W) 2

GCollier de serrage (Vitronic 18W / 36W) 2

Informations sur le mode d’emploi

Bienvenue à OASE Living Water. L’achat de votre Vitronic 9W / 18W / 36W constitue un excellent choix. Avant d’utiliser

l’appareil, lisez les instructions attentivement et familiarisez-vous parfaitement avec l’appareil. Assurez-vous que tout travail

effectué sur cet appareil et toute utilisation sont conformes aux instructions qui suivent. Suivez ces instructions à la lettre

an de vous assurer d’une manutention de l’appareil adéquate et sans risque. Conservez ces instructions dans un endroit

sûr et remettez-les au nouveau propriétaire si vous transmettez l’appareil.

Vitronic 9W

Vitronic 18W / 36W

RAPPEL

APPELEZ LE 1-866-627-3435

AVANT DE RETOURNER AU MAGASIN.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Oase Wasserfiltersystem Handbücher

Oase

Oase BioSmart 5000 Bedienungsanleitung

Oase

Oase Filtral 2500 UVC Bedienungsanleitung

Oase

Oase Filtoclear 3000 Bedienungsanleitung

Oase

Oase BioTec Premium 80000 EGC Bedienungsanleitung

Oase

Oase Bitron 36C Bedienungsanleitung

Oase

Oase Profi Clear Premium Compact L US Bedienungsanleitung

Oase

Oase FiltoClear 20000 Bedienungsanleitung

Oase

Oase ProfiClear Premium XL Bedienungsanleitung

Oase

Oase Filtral 5000 UVC Bedienungsanleitung

Oase

Oase BioPlus Series Bedienungsanleitung

Oase

Oase FiltoClear 12000 Bedienungsanleitung

Oase

Oase Eco Control Bedienungsanleitung

Oase

Oase Filtoclear 3000 Wartungs- und Serviceanleitung

Oase

Oase Biotec 30 Bedienungsanleitung

Oase

Oase Filtral UVC 700 Bedienungsanleitung

Oase

Oase BioSmart 5000 Bedienungsanleitung

Oase

Oase FiltoClear 5000 Bedienungsanleitung

Oase

Oase BioSmart 36000 Bedienungsanleitung

Oase

Oase FiltoClear 5000 Bedienungsanleitung

Oase

Oase Aquarius Eco Expert 22000 Bedienungsanleitung

Oase

Oase ProfiClear Premium Compact-L EGC Bedienungsanleitung

Oase

Oase BioMaster 250 Bedienungsanleitung

Oase

Oase BioSmart 30000 Bedienungsanleitung

Oase

Oase FiltoMatic CWS 7000 Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung