OJ Electronics AWG4 Bedienungsanleitung

WWW.OJELECTRONICS.COM

UWG4/AWG4 WiFi

Touch Thermostat

Interactive

User Manual

67433F 08/22 (KJE)

Contents

PAGE 2

1. Contents

2. Menu Overview . . . . . . . . . . . . . .3

3. Introduction . . . . . . . . . . . . . . . . 4

4. General Operation . . . . . . . . . . . .5

4.1 Navigation Buttons . . . . . . . . . . . 6

5. Ground Fault: (GFCI/EGFPD) 1/2 . . . 7

5. Ground Fault: (GFCI/EGFPD) 2/2 . . . 8

6. Icons 1/2. . . . . . . . . . . . . . . . . . . 9

6. Icons 2/2. . . . . . . . . . . . . . . . . . 10

7. Startup Wizard . . . . . . . . . . . . . . 11

7.1 Set the language . . . . . . . . . . . 12

7.2 System Test . . . . . . . . . . . . . . 13

7.3 Safety Test . . . . . . . . . . . . . . . 14

7.4 Set the preferred temperature unit 15

7.5 Enter the Distributor ID . . . . . . . 16

7.6 Setting the Load Measurement . . 17

7.7 Set the ﬂoor load . . . . . . . . . . .18

7.8 Set the sensor type. . . . . . . . . . 19

7.9 Set the date . . . . . . . . . . . . . . 20

7.10 Set the time . . . . . . . . . . . . . 21

7.11 Set ﬂoor protection . . . . . . . . . 22

7.12 Thermostat activation . . . . . . . 23

8. Programed Heating Schedule . . . . 24

9. Operating Choices . . . . . . . . . . . 25

9.1 Scheduled Operation . . . . . . . . 26

9.2 Manual Operation. . . . . . . . . . . 27

9.2.1 Manual Operation Adjust . . . . . 28

9.2.1.1 Adjust... for a few hours. . . . . 29

9.2.1.2 Adjust... for a few days . . . . . 30

9.2.1.3 Adjust... permanently . . . . . . 31

10. Thermostat Setup Menu . . . . . . 32

10.1 Heating Schedule 1/2 . . . . . . . 33

10.1 Heating Schedule 2/2 . . . . . . . 34

10.2 Energy Use . . . . . . . . . . . . . 35

10.3 User Settings . . . . . . . . . . . . 36

10.3.1 Child Lock 1/2 . . . . . . . . . 37

10.3.1 Child Lock 2/2 . . . . . . . . . 38

10.3.2 Display Brightness . . . . . . . 39

10.3.3 Screen Saver . . . . . . . . . .40

10.3.5 Date . . . . . . . . . . . . . . . 41

10.3.6 Time . . . . . . . . . . . . . . . 42

10.3.7 Daylight Saving Time . . . . . 43

10.3.8 Unit . . . . . . . . . . . . . . . . 44

10.3.9 Language . . . . . . . . . . . . 45

10.3.10 Information . . . . . . . . . . 46

10.3.11 Support . . . . . . . . . . . . 47

10.3.12 User Reset . . . . . . . . . . . 48

10.4 Installer Settings . . . . . . . . . . 49

10.4.1 Adaptive Function . . . . . . . 50

10.4.2 Open Window . . . . . . . . . 51

10.4.3 Sensor Application 1/2 . . . . 52

10.4.3 Sensor Application 2/2 . . . . 53

10.4.4 Sensor Type 1/2 . . . . . . . . 54

10.4.4 Sensor Type 2/2 . . . . . . . . 55

10.4.5 Floor Sensor Calibration . . . 56

10.4.6 Room Sensor Calibration . . . 57

10.4.7 Floor Protection 1/2 . . . . . . 58

10.4.7 Floor Protection 2/2 . . . . . . 59

10.4.8 Factory Reset . . . . . . . . . . 60

10.5 WiFi Settings 1/3 . . . . . . . . . . 61

10.5 WiFi Settings 2/3 . . . . . . . . . . 62

10.5 WiFi Settings 3/3 . . . . . . . . . . 63

10.6 Weather Settings . . . . . . . . . . 64

10.6.1 Viewing the weather forecast. 65

10.7 Connect to Google home 1/2 . . . 66

10.7 Connect to Google home 2/2 . . . 67

10.8 Connect to Amazon Alexa 1/3 . . 68

10.8 Connect to Amazon Alexa 2/3 . . 69

10.8 Connect to Amazon Alexa 3/3 . . 70

11. Factory Settings . . . . . . . . . . . . 71

12. Troubleshooting 1/5. . . . . . . . . . 72

12. Troubleshooting 2/5. . . . . . . . . . 73

12. Troubleshooting 3/5. . . . . . . . . . 74

12. Troubleshooting 4/5. . . . . . . . . . 75

12. Troubleshooting 5/5. . . . . . . . . . 76

Contents

PAGE 3

Installer Settings

2. Menu Overview

Menu Structure

Heating Schedule

User Settings

Heating Schedule

Energy Use

User Settings

Installer Settings

View/Edit Schedule

Reset to Factory Schedule

Child Lock

Display Brightness

Screen Saver

Date

Time

Daylight Saving Time

Unit

Language

Information

Support

Adaptive Function

Open Window

Sensor Application

Sensor Type

Floor Sensor Calibration

Floor Protection

Factory Reset

Room Sensor Calibration

WiFi/Weather

User Reset

Contents

PAGE 4

3. Introduction

Congratulations on the purchase of your new WiFi Touch

Thermostat. We hope that you will enjoy the ease of use

oered by the touchscreen and the intuitively designed

user interface. You can program the thermostat in any

way you would like with the options provided under

Heating Schedule and User Settings.

The WiFi-enabled thermostat allows you to both

monitor and control the thermostat remotely from a

web browser, Android or iOS smartphone or tablet –

anytime – anywhere. The thermostat also provides a daily

weather forecast once the WiFi/Weather wizard has been

completed successfully.

The thermostat will switch your underﬂoor heating

system on at predetermined times each day of the

week. You can set individual temperatures for up to six

separate events for each day of the week. Lowering the

temperature when your home is unoccupied will reduce

your energy costs without reducing comfort.

The thermostat comes with a preset heating schedule

that is suitable for most homes. Unless you change the

settings, the thermostat will operate according to this

preset heating schedule.

The thermostat features an adaptive function that

automatically changes the heating start times to ensure

that the required temperature has been reached at the

beginning of any speciﬁc event. After a few days, the

adaptive function will have learned how much earlier the

heating must be switched on.

The resistive touchscreen only requires a soft tap with

your ﬁngertip to register the touch.

In this manual, the touch areas on the screen will be

referred to as buttons.

The thermostat oers remotely control of your underﬂoor

heating - through the The OJ Microline® app, which

can be downloaded from both Google Play and App

Store.

With Google Home devices or Amazon Alexa devices

you can integrate with the thermostat. Once connected,

simply ask the Google Assistant or Alexa to turn the

heating up in a given room and let smart technology do

the rest.

Contents

PAGE 5

The thermostat has two physical buttons. A ground fault (GFCI/EGFPD) test button

is located on top of the thermostat, and a power/reset button is located on the right

side of the thermostat.

Test the GFCI/EGFPD monthly. The test has no inﬂuence on the settings; data,

including time and date, will be stored.

The thermostat is an intuitively operated touch thermostat in which the touchscreen

is used to navigate through the menus and to change the settings.

4. General Operation

Contents

PAGE 6

4.1 Navigation Buttons

Accept/Back/Cancel/Arrow Up/Arrow Down/Arrow Left/Arrow Right

Whenever you change a parameter setting, you must tap the “Accept” button for

the thermostat to acknowledge the change.

“Accept” is shown on the screen as “√”.

“Back” is shown on the screen as a button marked with a hollow arrow pointing to

the left.

In the various menus and submenus, you will ﬁnd the “Back” button in the upper

left corner of the touchscreen.

Tap the “Back” button to return to the previous menu.

“Cancel” is shown on the screen as a button marked “X”.

Although “Cancel” has the same eect as “Back”, it also results in all the unsaved

settings being discarded.

As soon as you leave a home screen and enter one of the menus, either a “Back”

button or a “Cancel” button will be shown.

To return to the home screen, tap Back/Cancel once or multiple times depending

on where you are in the menu structure.

“Arrow Up”, “Arrow Down”, “Arrow Left”, and “Arrow Right” are used to toggle

settings and values and to navigate through the menus. The “Arrow Up” and

“Arrow Down” buttons are repeat buttons. Holding either of them will make the

value change continuously.

Contents

PAGE 7

The GFCI thermostat has a built-in GFCI that ensures personal safety in case of

ground faults. The EGFPD thermostat has a built-in EGFPD that ensures equipment

protection in case of ground faults.

It is important that the GFCI/EGFPD is tested monthly. Installation and use must be

according to the national and local regulations.

Testing the GFCI/EGFPD:

Press the “TEST” button.

The test is successful if the red LED on the right of the thermostat ﬂashes once

every two seconds and “GROUND FAULT” appears on the display. If this does not

occur, check the installation.

Press the “Standby/Reset” button to reset the GFCI/EGFPD.

The red LED will stop ﬂashing and the display returns to normal appearance.

If the test fails, repeat the test. If it continues to fail, ask an electrician to check the

installation.

If, during normal operation, the GFCI/EGFPD trips without the “TEST” button

being pressed, there could be a ground fault! To check whether it is a ground fault

or nuisance tripping, press “Standby/Reset”. If this causes the red LED to stop

ﬂashing and stay o, it was nuisance tripping and the system is operating correctly.

If this does not occur, there is a ground fault! In case of a ground fault, it is important

to have the installation checked by a qualiﬁed electrician according to local and

national regulations.

5. Ground Fault: (GFCI/EGFPD) 1/2

Contents

PAGE 8

The red LED on the right of the thermostat can indicate four dierent GFCI/EGFPD

states:

1. LED o – NORMAL state.

2. LED ﬂashing slowly (once every two seconds) – TRIGGERED state. Try pressing

the “Standby/Reset” button to reset the GFCI/EGFPD.

3. LED ﬂashing quickly (ﬁve ﬂashes per second) – ERROR state. Try switching the

power o and then back on again. If the thermostat re-enters ERROR state, ei-

ther the wiring is wrong (a ground-neutral short exists) or the unit is defective and

must be replaced.

4. LED lit constantly – Internal microprocessor malfunction or abnormal hardware

fault! Try switching the thermostat o and then back on again. If the LED still

lights constantly, the GFCI/EGFPD is defective and the thermostat must be

replaced.

Note: The LED lights up brieﬂy without ﬂashing during every power-up.

5. Ground Fault: (GFCI/EGFPD) 2/2

Contents

PAGE 9

6. Icons 1/2

Heating Schedule

Energy Use

User Settings

Installer Settings

WiFi Settings

Child Lock

Display Brightness

icons

screen saver

Icon Meaning

Screen Saver

Date

Time

Daylight Saving Time

Unit

Language

Information

Support

5°

Icon Meaning

Adaptive Function

Open Window

Sensor Application

Sensor Type

Floor Protection

Floor Sensor

Calibration

Room Sensor

Calibration

Icon Meaning

Contents

PAGE 10

6. Icons 2/2

Factory Reset

Back

Cancel

Arrow Up

Arrow Down

Arrow Left

Arrow Right

icons

screen saver

icons

screen saver

icons

screen saver

icons

screen saver

icons

screen saver

icons

screen saver

icons

screen saver

Icon Meaning

Copy to

“Adjust… for a few days” in the future is activated

Heating is activated

Heating is activated with adaptive mode

Note

Try Again

WiFi connection

Weather

icons

screen saver

icons

screen saver

icons

screen saver

icons

screen saver

icons

screen saver

Icon Meaning

Contents

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere OJ Electronics Thermostat Handbücher

OJ Electronics

OJ Electronics OCD5/MCD5-1999 Bedienungsanleitung

OJ Electronics

OJ Electronics ETN4-1999 Bedienungsanleitung

OJ Electronics

OJ Electronics ETN4-1999 Bedienungsanleitung

OJ Electronics

OJ Electronics ETV Series Bedienungsanleitung

OJ Electronics

OJ Electronics ETR2 Bedienungsanleitung

OJ Electronics

OJ Electronics UDG4 Bedienungsanleitung

OJ Electronics

OJ Electronics MTU2 Bedienungsanleitung

OJ Electronics

OJ Electronics UTCG-9991 Bedienungsanleitung

OJ Electronics

OJ Electronics UWG4 Bedienungsanleitung

OJ Electronics

OJ Electronics OJ Microline ICD3-1999 Bedienungsanleitung

OJ Electronics

OJ Electronics UCG Bedienungsanleitung

OJ Electronics

OJ Electronics Microline OTN-1991-RU Series Bedienungsanleitung

OJ Electronics

OJ Electronics ETR Series Bedienungsanleitung

OJ Electronics

OJ Electronics MTC-1991-UFH Bedienungsanleitung

OJ Electronics

OJ Electronics ETN4-1999 Bedienungsanleitung

OJ Electronics

OJ Electronics ETD Series Bedienungsanleitung

OJ Electronics

OJ Electronics ETN4-1999 Bedienungsanleitung

OJ Electronics

OJ Electronics OCC3 Bedienungsanleitung

OJ Electronics

OJ Electronics OCD4 Installations- und Betriebshandbuch

OJ Electronics

OJ Electronics UCG Bedienungsanleitung

OJ Electronics

OJ Electronics MICROLINE OTN2 Bedienungsanleitung

OJ Electronics

OJ Electronics OCC4 Bedienungsanleitung

OJ Electronics

OJ Electronics MSD4-1999-UA Bedienungsanleitung

OJ Electronics

OJ Electronics OCC4 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung