OKIDATA 321 Turbo Handbuch

Inhaltsverzeichnis

Andere OKIDATA Drucker Handbücher

OKIDATA

OKIDATA ML320 Turbo Bedienungsanleitung

OKIDATA

OKIDATA OKIMATE 10 Bedienungsanleitung

OKIDATA

OKIDATA Pacemark 2410 Bedienungsanleitung

OKIDATA

OKIDATA Microline 320 Turbo Gebrauchs- und Pflegehandbuch

OKIDATA

OKIDATA OL400e Series Bedienungsanleitung

OKIDATA

OKIDATA DOC-IT3000 Bedienungsanleitung

OKIDATA

OKIDATA MC873 Bedienungsanleitung

OKIDATA

OKIDATA Microline ML395 Bedienungsanleitung

OKIDATA

OKIDATA OKIPAGE 20 Bedienungsanleitung

OKIDATA

OKIDATA ML320 Turbo Bedienungsanleitung

OKIDATA

OKIDATA B6300 Montage- und Wartungsanleitung

OKIDATA

OKIDATA OKIMATE 20 Bedienungsanleitung

OKIDATA

OKIDATA ML390 Turbo Bedienungsanleitung

OKIDATA

OKIDATA ML172 Series Bedienungsanleitung

OKIDATA

OKIDATA ML320 Turbo Bedienungsanleitung

OKIDATA

OKIDATA Microline 395 Anleitung zur Verwendung

OKIDATA

OKIDATA OL810e Bedienungsanleitung

OKIDATA

OKIDATA Microline ML395C Bedienungsanleitung

OKIDATA

OKIDATA ML380 Bedienungsanleitung

OKIDATA

OKIDATA OKIPAGE 10i Bedienungsanleitung

OKIDATA

OKIDATA Pacemark 3410 Bedienungsanleitung

OKIDATA

OKIDATA ML-520 Bedienungsanleitung

OKIDATA

OKIDATA MICROLINE ML590 Bedienungsanleitung

OKIDATA

OKIDATA MICROLINE 320 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

OkiData 321 Turbo Printer Setups

There are 4 steps to properly setup your OkiData 321 Turbo Printer:

1. Proper Driver Installation in Windows

2. Performing the proper GSI Service Bulletin

3. Programming the Menu on the 321 Turbo

4. Setting the Top of Form on the 321 Turbo

1. Proper Driver Installation in Windows

The default driver that may load when installing the Okidata 321 may be the Okidata 320

driver. Saleslifter Pro needs the OkiData 321 Turbo /d (IBM) driver. This driver handles longer

forms and doesn’t have issues with left hand margins.

Under no circumstances should you use the Okidata 320 driver. You MUST use the OkiData 321

Turbo /d (IBM) driver.

Once this driver is installed you should right click on the driver in windows control panel and

then left click on properties to enter the properties for this driver. Click on the Advanced Tab at

the top then about half way down the window will be a setting for “Print Directly to the Printer”.

You should choose that setting the click Apply and OK then that window will close leaving you

back at the installed printer window where you see your icons that show the installed printers.

2. Performing the proper GSI Service Bulletin

See next page

GSI Technical Service Bulletin # 5

Date: 09-16-04

Operating System: Windows XP Professional, Home, 2000

Problem: OkiData 321 printer stops at 11 or 11½ inches when printing long contracts

Solution: Under no circumstances should you use an Oki Data 320 Driver. You must use the

321 Turbo /d IBM driver. A new paper type needs to be created in Windows XP. This

solution has been tested with the OkiData 321 Turbo /d IBM driver installed.

Creating a New Paper Type:

1. Click on the Start Button

2. Click on Control Panel

3. Double Click on Printers and Faxes

4. You should now get the window with the

installed printers

5. At the top of the window click on File

6. Then Click on Server Properties

7. Click to put a check mark in the Box that

says Create a New Form

8. Enter GSI Custom into the Form

Description For: field

9. At the bottom of the window change Paper

Size Width to 13.00in

10. Then change the Paper Size Height to

22.00in

11. Then click on the Save Form Button

12. After you click Save Form the OK button

will change to Close, then click Close

You should now be able to print long

contracts from Saleslifter Pro.

3. Programming the Menu on the OkiData 321 Turbo

4. Setting the Top of Form on the OkiData 321 Turbo

Feed a single sheet of paper into the top of the printer as if it was a form.

Hold the “Shift” button down on the front of the printer with your left hand

While holding the “Shift” button with your left hand press and hold with your right hand the “Micro

Feed Down” button. You will hear the printer clicking as it micro feeds the paper back down into

the printer. You should hold this position until it stops feeding down, then you can let go of all

buttons.

You can now press the FF/LOAD button and the piece of paper will get kicked out.

Your Top of Form is now set.