Omega Engineering HH1384 Bedienungsanleitung

User’s Guide

DATALOGGER 4 INPUT

THERMOMETER

HH1384

INSTRUCTIONMANUAL

M A X M IN

ALA R M

INTV

m :s

d-h

F U LL

NO.

T 4

T 2

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia

Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia

Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6777

Mobile: +62 816 1740 8925

Fax: 021-8690 6771

1. INTRODUCTION: FEATURES

This instrument is a digital4 input thermometer and data logger

that works with anyK, J, E, T, R, S, N, L, U, Band C-type

thermocouple temperature sensor.

Temperature indication follows the international temperature

scale of 1990 (ITS-90).

Read the following safety information carefully before

attempting to operate the meter.

Use the meter only as specified in this manual; otherwise, the

protection provided by the meter may be impaired.

Environment conditions

Altitude up to 2000 meters

Relatively humidity 80% max.

Operation Ambient 0～50°C(32°F ~122°F)

Features

Isolated Input Protection of 350Vp-p between any two inputs.

Highlyaccurate thermometer with thermocouple K, J, E, T, R,

S, N, L, U, B, Ctypes.

4 input function T1/T2/T3/T4 temperature display.

Programmable Hi – Lo alarm for 4 inputs.

Display of MAX, MIN and MAX–MIN values of 4inputs.

Independent Input Setup (type of thermocouple,

Hi – Lo alarm values).

Memory and Read function (99 sets)

512KB auto datalogging capacity.

USB interface.

Safety symbols

Comply with EMC

~ 1 ~

2. SPECIFICATIONS

2-1 Electronical Specifications

°C °F

Type Range Accuracy Range Accuracy

-200 ~ -150

-150 ~ -100

-100 ~999.9

1000 ~ 1370

±3.0°C

±2.0°C

±0.05% ±1.0°C

±0.2% ±1.0°C

-328 ~ -238

-238 ~ -148

-148 ~ 999.9

1000 ~ 2498

±5.4°F

±3.6°F

±0.05% ±1.8°F

±0.2% ±1.8°F

-200 ~ -100

-100 ~ 100

100 ~ 999.9

±2.5°C

±1.5°C

±0.05% ±1.0°C

-328 ~ -148

-148 ~ 212

212 ~ 999.9

1000 ~ 1832

±4.5°F

±2.7°F

±0.05% ±1.8°F

±0.2% ±1°F

-150 ~ -100

-100 ~ 760

±3.0°C

±0.05% ±1.0°C

-238 ~ -148

-148 ~ 999.9

1000 ~ 1400

±5.4°F

±0.05% ±1.8°F

±0.2% ±1°F

-200 ~ -150

-150 ~ -100

-100 ~ 400

±3.0°C

±0.15% ±2.5°C

±0.1% ±1.0°C

-328 ~ -238

-238 ~ -148

-148 ~ 752

±5.4°F

±0.15% ±4.5°F

±0.1% ±1.8°F

R/S

0 ~ 100

100 ~ 300

300 ~ 999.9

1000 ~ 1600

±5.0°C

±3.0°C

±0.05% ±2.0°C

±0.25% ±2.0°C

32 ~ 212

212 ~ 572

572 ~ 999.9

1000 ~ 2912

±9.0°F

±5.4°F

±0.05% ±3.6°F

±0.25% ±3.6°F

0 ~ 999.9

1000 ~ 1300

±0.1% ±1.0°C

±0.2% ±1.0°C

32 ~ 999.9

1000 ~ 2372

±0.1% ±1.8°F

±0.2% ±1.8°F

-200 ~ 900 ±0.1% ±1.0°C -328 ~ 999.9

1000 ~ 1652

±0.1 % ±1.8°F

±0.2% ±1°F

0 ~ 600 ±0.1% ±1.0°C 32 ~ 999.9

1000 ~ 1112

±0.1% ±1.8°F

±0.2% ±1°F

600 ~ 999.9

1000 ~ 1760

±0.05% ±2.0°C

±0.1% ±2.0°C

1112 ~ 1831

1832 ~ 3200

±0.05% ±3.6°F

±0.1% ±3.6°F

0 ~ 999.9

1000 ~ 1760

±0.1% ±1.5°C

±0.2% ±1.5°C

32 ~ 999.9

1000 ~ 3200

±0.1% ±2.7°F

±0.2% ±2.7°F

~ 2 ~

NOTE

This basic accuracy specification does not include the error of

the temperature probe. Please refer to the temperature probe

accuracy specification for additional details.

Temperature Coefficient:

0.01% of reading +0.1°C per °C (0.2°F per °F)

outside the specified +18°C to 28°C (+64°F to 82°F) range.

Isolated Input Protection between any Two Inputs : 350Vp-p

Manual Data Memory Capacity: 99 sets.

Continuity Data Logging Capacity: 36,000 sets.

2-2 General Specifications

Power Supply: 6 pcs size AA battery or DC 9V AC adaptor.

Battery Life: approx. 55 hours (Alkaline battery)

Auto Power Off: 5, 15 or 30 minutes (If no key is pressed).

Low Battery Indicator: The ( ) is displayed when the

battery voltage drops below the operating voltage.

Measurement Rate : One time per 2 seconds.

Weight : 405g / 14.3oz (batteries included)

Dimension : 18.7(L) × 7.3(W) × 5.3(T) cm

7.3”(L) × 2.9”(W) × 2.1”(T)

Operating Temperature: 0 to 50℃(32 to 122℉)

and Humidity: Below 80% RH.

Storage Temperature: -10 to 60℃, 14 to 140℉

and Humidity: Below 70% RH.

Accessories: Instruction manual, alkaline batteries, USB cable,

software CD, carrying case and K-type

thermocouples (1 per channel).

~ 3 ~

3. PARTS & CONTROLS

3-1 Description of Parts & Control keys

MAX MIN

ALARM

INTV

m:s

d-h

FULL

NO.

T 4

T 3

T 2

T 1

(1). LCD Display

(2).Key : Power on – off control key.

(3).Keys:Setting keys.

(4). HOLD Key:

~ 4 ~

Data hold function key, press “HOLD” key to hold data, the

“H” symbol is displayed, press this key again to exit this

function.

Press and hold down “HOLD” key then press " " key to

turn on the meter, the “ ” symbol disappear, exit auto

power off function.

(5). MAX MIN Key: Press “MAX MIN” key to circulate the

reading of Maximum, Minimum, Maximum minus

Minimum, and Current. Press this key for 2 seconds to

exit this mode.

(6). °C / °F Key: Press “°C / °F” key to switch the units

between Celsius (°C) and Fahrenheit (°F).

(7). TYPE Key: Press "TYPE" key to enter the thermocouple

type select mode, press this key again to exit this mode.

(8). TIME Key: Press “TIME” key to circulate display data and

time.

(9). ALARM Key: Press “ALARM” key to enable or disable

Alarm function.

(10). MEM Key: Manual data memory control key.

(11). SET Key: Press “SET” key to start or exit setup.

(12). READ Key:Manual memory data reading control key.

(13). T1, T2, T3, T4 : Thermocouple T1, T2, T3 and T4 inputs.

(14). USB Interface Jack.

(15). AC Adaptor Input Jack.

3-2 Description of Display

MAX MIN

ALARM

INTV

m:s

d-h

FULL

NO.

T 4

T 3

T 2T 1

~ 5 ~

°F, °C : Temperature units.

: Auto power off indication.

OFFSET : The thermocouple measurement includes an offset

indication.

REC : MAX MIN Recording mode and current reading indication.

REC MAX : Maximum reading indication.

REC MIN : Minimum reading indication.

REC MAX-MIN : Maximum minus Minimum value indication.

H: Data hold function indication.

SET: Setting mode indication.

: Thermocouple type indication.

ALARM : Alarm mode indication.

ALARM

: Input temperature exceeds the high limit value

indication.

ALARM : Input temperature is below the low limit value

indication.

T1, T2, T3, T4 : Thermocouple T1, T2, T3, T4 input temperature

measurement display.

: Battery capacity indication.

: Replace batteries indication.

NO.

: Last manual data memory address number indication (01–99).

M: Manual data memory indication, Mdisplays one time store one

sets data into the memory.

NO.R: Manual data memory read address number indication,

the memory data displayed for read.

A-M : Auto data logging indication, A-M will disappear after storing

the data.

INTV : Auto data log interval time setting indication.

~ 6 ~

Full : Auto data logged memory full indication, if exceeds 255

memory blocks, total maximum record capacity size is

36,000 sets of data for 4 input thermocouple temperature

measurement (100,000 sets data for 1 input record).

m:s: Time display indication.

4. OPERATION INSTRUCTION

WARNING

Before using the meter inspect the case. Do not use the

meter if it appears damaged. Look for cracks or missing

plastic. Pay particular attention to the insulation around the

connectors.

Disconnect thermocouples from the meter before opening the

case.

Replace the batteries as soon as the battery indicator “ ”

appears. The possibility of false reading can lead to personal

injury.

Do not use the meter if it operates abnormally. Protection

may be impaired.

Do not operate the meter around explosive gas, vapor or dust.

Do not use the meter with any part of the case or cover

removed.

4-1 Setting the meter

1. Real –Time setting:

(a). Press " " key to turn on the meter.

(b). Press “SET” key to enter the setting mode, the “Set clock”

and “ SET” symbols are displayed.

(c). Press "



" key to enter real time setting mode and the two

flicking numbers of year.

(d). Press or key to set the year (real time).

~ 7 ~

(e). Press "



" key and move to the two flicking digits of month.

(f). Press or key to set month (real time).

(g). Press "



" key and move to the two flicking digits of day.

(h). Press or key to set day (real time).

(i). Press "



" key and move to the two flicking digits of hour.

(j). Press or key to set hour (real time).

(k). Press "



" key and move to the two flicking digits of

minutes.

(l). Press or key to set minutes (real time).

(m). Press "



" key and move to the two flicking digits of second.

(n). Press or key to set seconds (real time).

(o). Press "



" key to store real time values.

(r). Press “SET” key to exit this mode.

2. Interval –Time setting :

The logging interval time determines how often the meter stores

logged readings in memory.

(a). Press " " key to turn on the meter.

(b). Press “SET” key to enter the setting mode, then press or

key until the display shows “Set Intr”.

(c). Press "



" key to enter the interval time setting mode and the

three flicking numbers of second.

(d). Press or key to set the desired second of interval time

(1 to 255 seconds).

(e). Press "



" key to store the auto datalogging interval time.

(f). Press “SET” key to exit this mode.

3. Offset setting :

You can adjust the meter readings to compensate for the errors

of a specific thermocouple. The allowable adjustment range is

from +12.7 to -12.8 degree, regardless of the temperature units.

You can store individual offsets for T1, T2, T3 and T4.

(a). Press " " key to turn on the meter.

(b). Press “SET” key to enter the setting mode, then press or

key until the display shows “SEt OFSEt”.

~ 8 ~

(c). Press "" key to enter the offset setting mode, the

“OFFSET ” symbol is displayed.

(d). Press or key to select the desired T1, T2, T3 or T4.

(e). Press or key to set the desired offset values.

(f).. Press "" key to store the offset value.

(g). Press “SET” key to exit this mode.

The temperature measurement plus the offset appears in the

display. Remember to set the offset to 0.0 when it is no longer

needed. The “ OFFSET ” symbol will disappear when the offset

values all are 0.0.

4. Auto Power Off Time setting :

(a). Press " " key to turn on the meter.

(b). Press “SET” key to enter the setting mode, then press or

key until the display shows “SEt SLEEP”.

(c). Press "" key to enter the auto power off time setting mode,

the “SLEEP” symbol is displayed.

(d). Press or key to choose the desired auto power off

time. The choices are: 5, 15 and 30 minutes.

(e). Press "" key to store the choice.

(f). Press “SET” key to exit this mode.

5. Alarm High / Low Limit setting :

(a). Press " " key to turn on the meter.

(b). Press “SET” key to enter the setting mode, then press or

key until the display shows “SEt ALArn”.

(c). Press "" key to enter the alarm high limit and low limit

setting mode, the “ ALARM ” symbol is displayed.

(d). Press or key to select the desired T1, T2, T3 or T4.

(e). Press "" key to enter the high limit value setting, the “ ”

symbol is displayed.

(f). Press or key to set the desired alarm high limit value,

the resolution of setting value is 0.1 degree, regardless of

the temperature units.

-9-

Andere Omega Engineering Messgerät Handbücher

Omega Engineering

Omega Engineering HHP-2000 Series Bedienungsanleitung

Omega Engineering

Omega Engineering DP-F30 Series Bedienungsanleitung

Omega Engineering

Omega Engineering DPG104 Bedienungsanleitung

Omega Engineering

Omega Engineering FTB100 Series Bedienungsanleitung

Omega Engineering

Omega Engineering FMA-1600A Series Bedienungsanleitung

Omega Engineering

Omega Engineering HHSL-101 Bedienungsanleitung

Omega Engineering

Omega Engineering DPG280 Series Bedienungsanleitung

Omega Engineering

Omega Engineering SP-001 Bedienungsanleitung

Omega Engineering

Omega Engineering DFG81 Bedienungsanleitung

Omega Engineering

Omega Engineering DPG8000 Series Bedienungsanleitung

Omega Engineering

Omega Engineering FL900 Series Bedienungsanleitung

Omega Engineering

Omega Engineering DFG35 Series Bedienungsanleitung

Omega Engineering

Omega Engineering DP63000A-I Bedienungsanleitung

Omega Engineering

Omega Engineering i Series Bedienungsanleitung

Omega Engineering

Omega Engineering HX200 Bedienungsanleitung

Omega Engineering

Omega Engineering CL521 Bedienungsanleitung

Omega Engineering

Omega Engineering iServer 2 Kurzanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung