Omron HEM-711 Bedienungsanleitung

For Customer Service

Call Toll Free

1-800-634-4350

Manufactured by OMRON

Distributed by:

OMRON HEALTHCARE, INC.

300 Lakeview Parkway

Vernon Hills, Illinois 60061

www.omron.com/ohi

711INST

Automatic Blood Pressure Monitor

with IntelliSense™

Model HEM-711

INSTRUCTION MANUAL

SYSTOLIC

DIASTOLIC

PULSE/min

AUTOMATIC BLOODPRESSUREMONITOR

MODEL HEM-711

READY TO

MEASURE

REPLACE

BATTERIES

PROGRESS

ON/OFF

START

TITLE

TABLE OF CONTENTS

Introduction........................................................................................4

Notes on Safety.................................................................................5

Know Your Unit..................................................................................6

Quick Reference Guide.....................................................................7

Battery Installation/Replacement ......................................................8

How to Apply the Arm Cuff..........................................................9, 10

How to Take a Reading.............................................................11, 12

How to Use the Memory Function ..................................................13

How to Use the Optional AC adapter..............................................14

Troubleshooting...............................................................................15

Caution............................................................................................16

Care and Maintenance....................................................................17

Five Year Limited Warranty.............................................................18

Specifications..................................................................................19

TITLE

NOTES ON SAFETY

•The warning signs and the sample icons shown here are listed for you to use the product safely and

correctly as well as to prevent the risk and the damage to you and others from happening.

•The icons and meanings are as follow.

Warning sign Contents

Indicates matters in which bodily harm or material damage* may arise as a result

of incorrect handling.

Caution

The icon indicates prohibitions (what you cannot do).

Matters involving actual prohibitions are indicated by text or pictures in or near . The

left icon refers to "prohibition to disassemble".

The icon indicates something compulsory (always follow). Matters involving actual

compulsory actions are indicated by text or pictures in or near . The left icon refers to

"general compulsion".

The battery liquid may leak and damage the main unit. Please observe the following points.

•When you are not going to use the unit for a long period of time (approximately three

months or more), take out the batteries.

•Replace the worn batteries with new ones immediately.

•Do not use worn and new batteries together.

•Do not insert the batteries with their polarities in wrong direction.

Do not force to bend the arm cuff or the air tube excessively.

When removing the air tube, pull at the connector.

Do not apply strong shock or drop the main unit.

Do not inflate the arm cuff without it being wrapped on the arm.

* Material damage refers to a wide range of damage involving your house, household

goods, domestic animals, and pets.

Examples of signs

Self-diagnosis of measured results and treatment are dangerous.

Please follow the instructions of your doctor.

Caution

Do not use the unit on infants or persons who cannot express one's

intention.

Do not use the unit for any purpose other than measuring blood

pressure.

Do not use a cellular phone near the unit.

Improper operation may result.

Do not disassemble, repair, or remodel the main unit or the arm cuff of

the blood pressure monitor.

TITLE

INTRODUCTION

Thank you for purchasing the Omron Automatic Blood Pressure

Monitor with IntelliSense™, HEM-711. Although your blood pressure

fluctuates throughout the day, no self-adjustment is necessary as

the monitor intelligently adjusts to your changing conditions. The

IntelliSense™monitor uses fuzzy logic intelligence to sense both

your systolic and diastolic blood pressure values, and the result is

personalized inflation with every reading. Arm discomfort and

misreading due to improper cuff inflation are virtually eliminated.

Your new OMRON monitor uses the oscillometric method of blood

pressure measurement. This means the monitor detects your

blood's movement through your brachial artery and converts the

movements into a digital reading. At the push of a button, the monitor

automatically fills the cuff with air, starts deflation, then displays

your systolic, diastolic, and pulse readings on an extra large display

panel.

Please read this instruction manual thoroughly before using

this unit. For specific information on your own blood pressure,

CONTACT YOUR PHYSICIAN.

TITLE

QUICK REFERENCE GUIDE

1. Avoid eating, smoking, and exercising for at least 30 minutes

before taking a measurement.

2. Remove tight-fitting clothing from your upper arm.

3. Sit in a chair with your feet flat on the floor and place your arm

on a table so that the cuff is at the same level as your heart.

4. Put your arm through the cuff loop making sure that the bottom

edge of the cuff is approximately one-half inch above the elbow

and that the Green Marker on the cuff is above brachial artery.

5. Pull the end of the cuff so that the entire cuff is evenly tightened

around your arm and press the hook material firmly against the

pile side of the cuff.

6. Press the ON/OFF button.

7. After the Heart Symbol ( ) appears on the digital panel, press

the Start button, and remain still until the measurement is complete.

8. When measurement is complete, the monitor displays your blood

pressure and pulse rate, and automatically deflates the cuff.

9. Wait 2-3 minutes before taking another blood pressure

measurement. You may require more rest time between readings

depending on your individual physiological characteristics.

1/2 inch

Green Marker

TITLE

KNOWYOUR UNIT

SYSTOLIC

DIASTOLIC

PULSE/min

AUTOMATIC BLOODPRESSUREMONITOR

MODEL HEM-711

READYTO

MEASURE

REPLACE

BATTERIES

PROGRESS

ON/OFF

START

START Button

Arm Cuff

Air Jack

Air Plug

(Connects to the air jack)

Green Marker

Diastolic Blood Pressure Display /

Pulse Display

Carrying Case

Heart Symbol

Air Tube

Memory Call Button

Systolic Blood

Pressure Display

ON/OFF Button

TITLE

HOW TO APPLY THE ARM CUFF

1. If the cuff is assembled correctly,

the hook material will be on the

outside of the cuff loop and the

metal D-ring will not touch your

skin.

2. If the cuff is not assembled, pass

the end of the cuff furthest from

the tubing through the metal D-

ring to form a loop. The smooth

cloth should be on the inside of

the cuff loop.

3. Sit in a chair with your feet flat

on the floor and place your arm

on a table so that the cuff is at

the same level as your heart.

4. Put your arm through the

cuff loop. The bottom of

the cuff should be

approximately 1/2"

above the elbow. The

Green Marker on the cuff

should lie over the

brachial artery on the

inside of the arm. Tube

should run down center of arm

approximately even with middle

finger.

SYSTOLIC

DIASTOLIC

PULSE/

MODELH

Pile Side Material

Sewn Hook Material

D-Ring

Bottom Edge 1/2 Inch

Green Marker Cuff Tube

TITLE

BATTERY INSTALLATION/REPLACEMENT

1. Slide the battery cover off in

the direction of the arrow.

2. Install or replace 4 "AA" size

batteries so the + (positive)

and –(negative) polarities

match the polarities of the

battery compartment as

indicated.

3. Replace the battery cover.

Notes:

If the Low Battery Indicator

( ) appears on the display,

replace all four batteries.

Long-life alkaline batteries

are recommended.

Remove the batteries if the

monitor will not be used for

an extended period of time.

TITLE

HOW TO TAKE A READING

Ready to Measure

Initial LCD Test

Inflation started.

1. Press the ON/OFF button.

a) All display symbols appear for approximately

one second.

b) When the monitor becomes ready to measure,

the Heart Symbol appears on the display.

2. Press the START button and

remain still.

As the cuff begins to inflate, the monitor

automatically determines your ideal inflation

level. Because this monitor detects the pulse

even during inflation, do not move your arm

and remain still until the entire measurement

completes.

3. Inflation stops automatically and

measurement is started.

As the cuff slowly deflates, decreasing

numbers appear on the display and the Heart

Symbol ( ) flashes at every heartbeat. In rare

circumstances, a higher inflation may be

necessary. In those cases, the monitor

reinflates the cuff up to 30 mmHg higher than

initial inflation and restarts the measurement.

4. When the measurement is complete,

the arm cuff completely deflates and

your blood pressure and pulse rate

are displayed.

NOTE: The monitor automatically stores blood

pressure and pulse rate into the memory.

5. Press the ON/OFF button to turn

the monitor off.

NOTE: If you forget to turn the monitor off, it

will automatically shut itself off after five

minutes.

TITLE

HOW TO APPLY THE ARM CUFF

5. Pull the cuff so that the top

and bottom edges are

tightened evenly around

your arm.

6. When the cuff is positioned

correctly, press the sewn

hook material FIRMLY

against the pile side of the

cuff.

7. Make certain the cuff fits

snugly around your arm.

The cuff should make good

contact with your skin.

You should be able to fit

one finger between the

cuff and your arm.

8. Relax your arm and turn

your palm upward.

9. Be sure there are no kinks

in the air tubing.

TITLE

HOW TO USE THE MEMORY FUNCTION

This monitor has a memory capable of storing fourteen sets of readings.

Every time you complete the measurement, the monitor automatically

stores blood pressure and pulse rate.

•Push the button to recall stored readings while the

Heart Symbol ( ) is displayed.

•When the memory is holding fourteen sets of readings, the

oldest set will be deleted to store a new set.

START

Last reading

Value before

the last reading Value of fourteen

readings before

Press these two buttons

at the same time. Display of memory deletion

• To delete stored readings, press the button and the

Start button at once, then all the readings will be deleted.

NOTE: You can not delete the stored readings partially.

TITLE

HOW TO TAKE A READING

START

Continue to press button

•If your systolic pressure is known

to be more than 220 mmHg,

push and hold the START button

until the monitor inflates 30 to 40

mmHg higher than your suspected

systolic pressure.

NOTE: Do not apply more

pressure than necessary.

The monitor will not

inflate above 300 mmHg.

•If you want to stop the

measurement, push the ON/OFF

button. The monitor will stop

inflating and start deflating

rapidly, then the monitor will

power off.

Instructions for special conditions:

TITLE

TROUBLESHOOTING

If you continue to have difficulty obtaining a reading, call

OMRON HEALTHCARE CUSTOMER SERVICETOLL FREE 1-800-634-4350.

Please tell the representative you have an OMRON Model HEM-711.

Error Indicator Cause Correction

Cuff under-inflated.

Movement during

measurement.

Cuff over-inflated (more than

300 mmHg).

Battery voltage is excessively

low.

Turn monitor off, wait 2-3 minutes

and take another measurement.

Repeat steps listed under "How to

Take a Reading." If "EE" is displayed

again, take another measurement

by pressing and holding the START

button as instruction page 12 under

"How to Take a Reading", instructions

for special conditions.

Turn the monitor off, carefully read

and repeat steps listed under "How

to Take a Reading."

Replace all four "AA" batteries with

new batteries.

Problem caused by abnormal

memory function. Contact OMRON Customer Service

Toll Free 1-800-634-4350

HOW TO USE THE OPTIONAL AC ADAPTER

(ACCESSORY ITEM SOLD SEPARATELY)

To avoid potential damage to the monitor, use only the exclusive

AC adapter (Model HEM-ADPT1) which can be purchased from:

Omron Healthcare, Inc.

300 Lakeview Parkway

Vernon Hills, IL 60061

Toll Free Phone #: 1-800-634-4350

To connect AC adapter

1. Insert the AC adapter plug

into the jack on the side of the

monitor.

2. Insert the AC adapter plug

into a 120V AC outlet (50 - 60

cycles).

To remove the AC adapter

To remove the AC adapter, disconnect the adapter plug from the

AC outlet first and then disconnect the cord from the monitor’s

jack.

NOTE: The monitor is designed not to draw power from the batteries

when the AC adapter is in use.

Plug

Jack

Option AC Adapter

TITLE

CARE AND MAINTENANCE

To protect your monitor from damage, please AVOID the following:

•Subjecting your monitor and cuff to extreme temperatures,

humidity, moisture, and direct sunlight.

•Folding the cuff and tubing tightly.

•Inflating the monitor over 280 mmHg.

•Disassembling the monitor.

•Subjecting the monitor to strong shocks (for example,

dropping the monitor on the floor.)

•Do not clean the monitor with volatile liquids.

THE MONITOR SHOULD BE CLEANED WITH A SOFT,

DRY CLOTH.

•Do not clean cuff.

TITLECAUTION

CAUTION:

Changes or modifications not expressly approved by Omron Healthcare, Inc.

could void the user’s warranty.

NOTE:

POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)

This product has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. The product generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If the product does cause harmful interference to radio or television

reception, which can be determined by turning the product on and off, the user

is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the product and receiver.

•Connect the product into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the interference-causing

equipment standard entitled "Digital Apparatus", ICES-003 of the Canadian

Department of Communications.

Cet appareil numérique respecte les limites de bruits radioeléctriques

applicables aux appareils numériques de Classe B prescrites dans la norme

sur le matériel brouilleur: "Appareils Numériques", ICES-003 èdictée par le

ministre des communications.

SPECIFICATIONS

Model: HEM-711

Display: LCD Digital Display

Measurement Range: Pressure: 0 to 280 mmHg

Pulse: 40 to 180/minute

Accuracy/Calibration: Pressure: ±3 mmHg or 2% of reading

Pulse: ±5% of reading

Inflation: Automatic by electric pump

Deflation: Active electronic control valve

Rapid Pressure Release: Active electronic control valve

Pressure Detection: Capacitive pressure sensor

Measurement Method: Oscillometric method

Pulse Wave Detection: Capacitive pressure sensor

Power Source: 4 "AA" batteries or AC adapter (sold separately)

Battery Life: Approximately 300 uses

Operating Temperature/Humidity:

50°F to 104°F (10°C to 40°C)

30 to 85% RH maximum

Storage Temperature/Humidity:

–4°F to 140°F (–20°C to 60°C)

10 to 95% RH maximum

Main Unit Weight: Approximately 12.3 oz (350g) not including batteries

Main Unit Dimensions: Approximately 4 1/4" (l) x 6 2/3" (w) x 2 3/5" (h)

(109 mm x 170 mm x 66 mm)

Cuff Dimensions: Approximately 5 1/2" x 19" (140 mm x 480 mm)

Cuff Circumference: Fits arm circumference 9" to 13"

Accessories: Arm cuff, carrying case, instruction manual

NOTE: These specifications are subject to change without notice.

*Optional accessories: large cuff (fits arms 13" to 17" in circumference) and small cuff

(fits arms 7”to 9”in circumference) are sold separately.

FIVEYEAR LIMITED WARRANTY

Your HEM-711 IntelliSense™Automatic Blood Pressure Monitor is

warranted to be free from manufacturing defects for a period of five

years under normal use. The five year warranty excludes the

monitor cuff. The cuff is warranted for a one year period. This

warranty extends only to the original retail purchaser.

Should repair be needed within the warranty period, ship the unit

prepaid to Omron Healthcare, Inc., 300 Lakeview Parkway,

Vernon Hills, IL 60061, Attn: Repair Dept., together with $5.00 for

return shipping and insurance. Be sure to include the model

number of your unit and your phone number on any

correspondence.

We will either repair or replace (at our option) free of charge any

parts necessary to correct defects in the materials or workmanship.

The above warranty is complete and exclusive. The warrantor

expressly disclaims liability for incidental, special, or consequential

damages of any nature. (Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above

warranty may not apply to you.)

Any implied warranties arising by the operation of law shall be

limited in duration to the term of this warranty. (Some states do not

allow limitations on how long an implied warranty lasts, so the

above limitation may not apply to you.)

This warranty gives you specific legal rights, and you may have

other rights which vary from state to state. As a condition to

operation of your warranty, the enclosed registration card must be

completed and sent to us within 10 days from the date of purchase.

FOR CUSTOMER SERVICE CALL TOLL FREE:

1-800-634-4350

Andere Handbücher für HEM-711

Inhaltsverzeichnis

Andere Omron Blutdruckmessgerät Handbücher

Omron

Omron HEM-7320T-CA Bedienungsanleitung

Omron

Omron BP765 Bedienungsanleitung

Omron

Omron HEM-7113 Bedienungsanleitung

Omron

Omron IntelliSense HEM-907 Bedienungsanleitung

Omron

Omron M2 Compact Bedienungsanleitung

Omron

Omron SYSDRIVE MX2 SERIES Bedienungsanleitung

Omron

Omron M2 Compact Bedienungsanleitung

Omron

Omron M7 Intelli IT Bedienungsanleitung

Omron

Omron RX-3 RX-3 Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

Omron

Omron BP786CAN Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

Omron

Omron BP742N Bedienungsanleitung

Omron

Omron M1 Plus Bedienungsanleitung

Omron

Omron HEM-7155T-ESL Bedienungsanleitung

Omron

Omron M5-I Bedienungsanleitung

Omron

Omron HEM-6121 Bedienungsanleitung

Omron

Omron M3 Intellisense Bedienungsanleitung

Omron

Omron M2 Compact Bedienungsanleitung

Omron

Omron M10-IT Bedienungsanleitung

Omron

Omron HEM-609 Bedienungsanleitung

Omron

Omron BP761CAN Bedienungsanleitung

Omron

Omron HEM-7156 Bedienungsanleitung

Omron

Omron HEM-629 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung

Spacelabs Healthcare

Spacelabs Healthcare 90217A Bedienungsanleitung