Omron IntelliSense HEM-907 Bedienungsanleitung

HIDE

P-SET

100

AUTO

140180

220

260

280

MODE

AVG.MANU.

CHECK

SINGLE

ON/OFF

START

STOP

mmHg

SYS

mmHg

DIA

BPM

PULSE

ART.

INDEX

MAX

OMRON

Digital Automatic Blood Pressure Monitor

ModelHEM-907

Table of Contents

Be Sure to Read This Section

Notes on Safety..................................1

Know Your Unit

Features of the Product......................4

Components of the Product ...............5

Options...........................................6

Names and Functions of the Parts.....7

Names of the Parts.........................7

Functions and setting

while the unit is in use ....................9

Preparations before Measurement

How to Apply the Cuff ......................11

How to Use the Power Source.........13

How to Use the AC Adapter............13

Installation and Replacement

of Battery Pack.............................14

How to Measure Blood Pressure

How to Measure Blood Pressure .....15

SINGLE Mode ..............................16

AVG. Mode...................................18

MANU. Mode................................20

CHECK Mode...............................22

How to Clean the Unit after Use ........23

List of Error Codes...........................24

Troubleshooting ...............................25

Specifications

Specifications...................................26

Exemptions on warranty...................27

MEMO (Blank pages)..................28-30

Thank you very much for purchasing the

OMRON Digital Automatic Blood Pressure

Monitor.

Please read this Instruction Manual thoroughly

to ensure safe and correct use of the monitor.

Please keep this Instruction Manual for future

reference.

INSTRUCTION MANUAL

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 1

Notes on Safety

Warning

Do not wrap the cuff over the arm where intravenous injection or transfusion is

being conducted.

• Intravenous injection or transfusion will not be possible.

Do not erroneously connect the air tube or the cuff to the tube of other

equipment connected to intracorporeal organ.

• Air may get into the blood vessels.

When a person other than the doctor or medical employee uses this monitor,

self-diagnosis of the measured results or treatment is dangerous. Please

consult and follow the instruction of the doctor.

• Self-diagnosis may worsen the disease.

If you encounter any problem during measurement such as inflation does not

stop, remove the cuff or pull out the air tube from the main unit.

• If inflation does not stop, there is danger of peripheral neuropathy.

If the fluid inside the battery gets in your eye, rinse the eye with lots of water

without rubbing, then seek medical treatment immediately.

• If left unattended, there is danger of loss of eyesight.

Do not use this unit in places where inflammable gas, such as highly

inflammable anesthetic, may be generated or in a high-pressure oxygen room

or an oxygen tent.

• It may cause ignition and explosion.

Do not use the exclusive battery pack (option) for other equipment.

Do not throw the battery pack into fire, or heat, or disassemble it.

• It may cause heat, ignition, short-circuit or rupture.

Do not touch the AC adapter with wet hands.

• You may suffer electric shock.

If you are going to leave this unit unused for a long time, be sure to unplug the

AC adapter from the electric outlet.

• This is to avoid danger of electric shock, electric leak or fire due to

deteriorated insulation.

Be sure to unplug the AC adapter from the electric outlet when installing,

removing, or cleaning the part(s).

• This is to avoid danger of electric shock or injuries.

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 1

Be Sure to Read This Section

Caution

Notes on Safety

In the following cases, check the readings with the stethoscope.

(1) When an irregular pulse wave is displayed

• The reading may be erroneous due to external vibration or patient's body

movement.

(2) When erroneous reading takes place or the measured value is doubtful

• The reading may be erroneous due to external vibration or patient's body

movement.

• An error may have occurred or the blood pressure cannot be measured for

patient with peripheral circulatory disturbance or extreme hypotension.

• An error may occur if patient has extremely short variation of blood pressure

such as arrhythmia.

Be sure to use the AC adapter appropriate for your country.

• If not, it may cause fire or you may suffer electric shock.

Do not share an electric outlet with other unit or electric appliance.

• It may cause fire or you may suffer electric shock.

After cleaning this unit, dry it well, then plug the AC adapter in the electric

outlet.

• If not, you may suffer electric shock.

Insert the AC adapter to the electric outlet as far as it goes.

Do not use the AC adapter with dust accumulated on it.

• There is danger of electric shock, or there may be short circuit or fire

ignition.

If you encounter any trouble with the main unit, immediately stop using, turn

off the unit, unplug the AC adapter from the electric outlet, then contact the

repair department.

• There is danger of electric shock, or there may be short circuit or fire

ignition.

Do not disassemble or remodel this unit.

• There is danger of electric shock or injury, or there may be fire, or trouble.

Do not use any cuff other than the one exclusive for this unit.

• If not, result may be erroneous.

Do not use this unit on infants.

• Blood pressure may not be measured correctly.

Do not use this unit on patient using a pump oxygenator.

• The unit can not measure correctly.

Do not use AC adapter and battery pack that are not specified for this unit.

• It may cause fire or you may suffer electric shock.

Do not short-circuit the polarities of the optional battery pack with a metal

object such as wire.

If the fluid in the battery drip on your skin or clothes, immediately wash off the

fluid with water.

• You may suffer injury.

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 2

Notes on Safety

Caution

Do not use a cellular phone near this unit.

• This unit may malfunction.

Do not use this unit in a moving vehicle.

• This may result in erroneous measurement.

Do not install parts and/or instrument that are not specified for this unit.

• It may cause damage to the unit.

Do not use broken power cord or AC adapter, or loose electric outlet.

• There is danger of electric shock, or there may be short circuit or fire

ignition.

Do not pull the power cord when unplugging the AC adapter from the electric

outlet.

• The power cord will be disconnected or short-circuited, and may cause fire

or you may suffer electric shock.

Do not scratch, damage, modify, forcibly bend, pull, twist, bundle the cord of

AC adapter, or place heavy materials on it, or pinch it.

• You may suffer electric shock or there may be electric leak and fire because

of deteriorated insulation.

Do not install or store this unit where it may be sprayed with water or

medication.

• There is danger of electric shock.

General advice

Do not place or put anything on this unit.

Do not apply strong shock to or drop this unit.

Turn off power and unplug the AC adapter from the electric outlet before moving the unit.

Read the instruction manual of the other devices to be used at the same time with this unit, to

understand and be aware of the interaction between the devices.

Before using the unit

• Check if all cords and tubes are securely connected.

• Operate the Buttons to check that this unit operates normally before use.

When using the unit

• Do not inflate the cuff without being wrapped over the arm.

• Do not use torn cuff.

• Be sure that the patient do not touch the Buttons of this unit.

After using the unit

• Clean and store this monitor and accessories.

• Do not clean this unit with gasoline, paint thinner, or high concentration alcohol.

• Do not disinfect this unit by autoclave or gas sterilization (EOG, formaldehyde, or high

concentration ozone).

Do not install or store this unit in the following places.

• Under direct sunlight

• Dusty or salty environment

• At an inclined position, or subject to vibration and/ or shock

• Storage of chemicals or where gas may be generated

• At high temperature and high humidity

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 3

Be Sure to Read This Section

Know Your Unit

Features of the Product

OMRON Digital Automatic Blood Pressure Monitor, Model HEM-907 is developed to measure

blood pressure with accuracy and simple operation in the doctor's consultation room or at bedside.

• One-push operation

Just by wrapping the cuff and pushing the START Button (to start measurement), blood pressure

and pulse rate can be measured. Measurement is made by oscillometric method.

• Automatic pressure setting

When the P-SET (Pressure Setting) Knob is set to "AUTO," this unit will automatically inflate the

cuff to the optimal pressure according to each patient's blood pressure. Cumbersome pressure

value setting operation is not necessary.

• Large and easy to read display

With the use of an LCD display, display of figures is large and easy to read.

• Quiet operation

Because this unit is designed for quiet operation, it can be used in the hospital room at night.

• Average Mode (AVG. Mode)

Just by wrapping the cuff and pushing the START Button (to start measurement), this unit will

automatically start to measure for two or three times. After the measurements, the average values

of systolic and diastolic blood pressures and pulse rate of measurements are displayed. The

results of each measurement can also be called. By changing the setting, the number of

measurements and the interval can be changed.

• Auscultation Mode (MANU. Mode)

This unit can measure blood pressure by using a stethoscope. The unit inflates and deflates the

cuff automatically, then displays the pressure values. As the pressures during deflation are digitally

displayed and synchronized with the pulse rate, they can be read with accuracy. The deflation

speed after confirming the systolic pressure and immediately before the diastolic pressure can be

accelerated.

INTELLISENSE blood pressure monitor is a global brand name of blood pressure monitor

equipped with bio-information sensing and high performance fuzzy logic technology, which are

the key technologies of OMRON. With this excellent sensing technology, the monitor can

achieve "accurate measurement".

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 4

Components of the Product

HIDE

P-SET

100

AUTO

140180

220

260

280

MODE

AVG.MANU.

CHECK

SINGLE

ON/OFF

START

STOP

RANGE

MINMAX

INDEX

ART.

22~32cm(9"~13")

REF

HEM-CR19

TUBE

Main unit

Accessories

Air tube 1.0m (39 1/3") *

Model: HEM-TUBE-100

Cuff / bladder set M *

Model: HEM-970-CR19

Applicable arm circumference:

22 to 32 cm

AC adapter

Model: (Refer to OMRON dealer for the appropriate AC adapter).

Note: Actual AC adapter may look different from illustration.

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 5

Know Your Unit

Components of the Product

Cuff / bladder set L

(with built-in bladder) *

Model: HEM-907-CL19

Applicable arm circumference:

32 to 42 cm

Cuff / bladder set S

(with built-in bladder) *

Model: HEM-907-CS19

Applicable arm circumference:

17 to 22 cm

Stand exclusive for this unit *

Model: HEM-907-STAND Wall-hanging kit *

Model: HEM-907-WKIT

Bladder (three types) *

Pole-mounting kit *

Model: HEM-907-PKIT

Cuff (three types) *

Cuff / bladder set M

(with built-in bladder) *

Model: HEM-907-CR19

Applicable arm circumference:

22 to 32 cm

INDEX

ART.

RANGE

MIN MAX

32~42cm(13"~17")

REF

HEM-CL19

RANGE

MINMAX

INDEX

ART.

22~32cm(9"~13")

REF

HEM-CR19

ART.

RANGE

MINMAX

INDEX

REF

HEM-CS19

17~22cm(7"~9")

INDEX

ART.

RANGE

MINMAX

32~42cm(13"~17")

REF

HEM-CL19

RANGE

MIN MAX

INDEX

ART.

22~32cm(9"~13")

REF

HEM-CR19

ART.

RANGE

MINMAX

INDEX

REF

HEM-CS19

17~22cm(7"~9")

Options

Cuff L (with no bladder)

Model:HEM-907-CUFFL

Cuff M (with no bladder)

Model: HEM-907-CUFFM

Cuff S (with no bladder)

Model: HEM-907-CUFFS

Bladder L

Model: HEM-907-BLDRL

Bladder M

Model: HEM-907-BLDRM

Bladder S

Model: HEM-907-BLDRS

Battery pack (48H907N) *

Model: HEM-907-PBAT

Air tube 1.3 m *

Model: HEM-TUBE-130 Air tube 1.0 m *

Model: HEM-TUBE-100 AC adapter

Model: (Refer to OMRON

dealer for the appropriate AC

adapter).

Items attached with

an asterisk (*) are

consumables and

not covered by the

guarantee.

Please understand

that the

specifications of

accessories and

options are subject

to change without

prior notice.

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 6

Names and Functions of the Parts

Main unit

1.Display: Displays blood pressure values, pulse rate, and pulse wave level.

2.HIDE Button: Switches between display and non-display of measured results.

3.DC jack: Connects the AC adapter.

4.P-SET (pressure setting) Knob: In the AUTO position, inflation pressure is automatically set.

Otherwise, inflation pressure can be set between 100 and 280 mmHg.

5.MODE Selector: Selects the mode of measurement.

• One-time Measurement Mode (SINGLE Mode): Measurement with automatic inflation

• Average Mode (AVG. Mode): Automatically measures two (or three) times consecutively.

• Auscultation Mode (MANU. Mode): Automatic inflation, automatic deflation, and pressure display (does not measure

blood pressure).

• Check Mode (CHECK Mode): Checks the accuracy of pressure display. Displays only pressure.

6.ON/OFF (power) Button: Turns on or off the power of the unit.

7.START Button : Starts the measurement.

8. DEFLATION (deflation control) /Display Switch Button:

• In the MANU. Mode; Deflates the cuff by approximately 5 to 10 mmHg with each push of the button.

• In the AVG. Mode; Switches the display of average values and the measurement results with each push.

9.Air Connector: Connects the air tube.

10.STOP Button: Stops the measurement and deflates air rapidly.

HIDE

P-SET

100

AUTO

140 180

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

ON/OFF

START

STOP

mmHg

SYS

mmHg

DIA

BPM

PULSE

DC8V

1. Display

2. HIDE (non-display) Button

3. DC jack

4. P-SET (pressure

setting) Knob

5. MODE Selector

6. ON/OFF (power)

Button

7. START Button (to

start measurement)

8. DEFLATION

(deflation control)

/Display Switch

Button

9. Air Connector

10. STOP Button

Names of the Parts

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 7

Know Your Unit

Names and Functions of the Parts

Display

HIDE

BPM

mmHg

PULSE

SYS

mmHg

DIA

Systolic blood pressure

When the measurement is finished: Displays systolic blood pressure.

When an error occurred: Displays error code.

In the CHECK Mode: Displays pressures.

Diastolic blood pressure

During measurement: Displays pressures.

When the measurement is finished: Displays

diastolic blood pressure.

In the CHECK Mode: Displays pressures.

Pulse rate

When the measurement is

finished: Displays pulse rate.

Contents when the AVG.

Mode is selected

AVG.: Mean value

1st : First measurement

2nd : Second measurement

3rd : Third measurement

Ready to Measure /

Pulse rate synchronization

Pulse level /

Number of irregular pulse waves

Number of irregular pulse waves: The pulse

wave with a difference of more than 25%

from the average interval of pulse waves is

determined as irregular. Number of irregular

pulse waves is displayed up to three times.

Battery level

Displays for the operable level.

Blinks for a low charged

level

Displays for the inoperable

level.

Charging

Displays when the battery

pack is being charged.

External power source

Displays AC when the unit is connected

to the external power source via the AC

adapter.

Example of display

No. of arrhythmias

123

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 8

Names and Functions of the Parts

Functions and setting while the unit is in use

(1) Pressure setting function

A function that can switch the pressure setting

Inflation can be set by AUTO (automatic setting) method or the pressure value setting method.

AUTO (Automatic setting): Can be used when the SINGLE, AVG., or MANU. Mode is selected.

The unit estimates the systolic blood pressure value during inflation and inflates to an appropriate

cuff pressure.

Pressure value setting method: Pressure value can be set between 100 and 280 mmHg. Set the

pressure value at about 30 to 40 mmHg higher than the expected systolic pressure.

• To set the P-SET to "AUTO," turn the P-SET Knob counterclockwise as far as it goes until you can hear a click sound.

• In the "AUTO" setting, proper inflation may not be possible when the systolic blood pressure is expected to be more than 220

mmHg. Use the unit in the pressure value setting method.

• If the cuff cannot be inflated to the pressure necessary for the measurement, it may be re-inflated automatically.

ON/OFF

START

STOP

HIDE

P-SET

100

AUTO

140 180

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

ON/OFF

START

STOP

HIDE

P-SET

100

AUTO

140 180

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

(2) Non-display function

A function not to display measurement results. However, the cuff

pressure during measurement is displayed.

This function can be used in the SINGLE and AVG. Modes.

By each push of the Button, display or non-display of

the measurement results is switched.

HIDE

(3) Manual deflation control function

A function to accelerate deflation by pushing the DEFLATION

(deflation control) / Display Switch Button during deflation.

This function can be used in the MANU. Mode.

With each push of the Button, deflation speed is

accelerated by 5 to 10 mmHg.

BPM

mmHg

PULSE

SYS

mmHg

DIA

Display Non-display

P-SET

HIDE

HEM-907-draft(Eng) 9/21/00 4:07 PM Page 9

Andere Handbücher für IntelliSense HEM-907

Inhaltsverzeichnis

Andere Omron Blutdruckmessgerät Handbücher

Omron

Omron R6 Bedienungsanleitung

Omron

Omron M5 Bedienungsanleitung

Omron

Omron HXA-GCUFF-XLLA Bedienungsanleitung

Omron

Omron HEM-7221 Bedienungsanleitung

Omron

Omron HEM-711DLX Bedienungsanleitung

Omron

Omron T9P Bedienungsanleitung

Omron

Omron Complete BP7900 Bedienungsanleitung

Omron

Omron R2 Bedienungsanleitung

Omron

Omron BP5350 Bedienungsanleitung

Omron

Omron RS2 Bedienungsanleitung

Omron

Omron i-Q142 Bedienungsanleitung

Omron

Omron HEM-7203 Bedienungsanleitung

Omron

Omron AUTOMATIC DIGITAL HEM-739 Bedienungsanleitung

Omron

Omron M1 Compact Bedienungsanleitung

Omron

Omron M1 Basic HEM-7121J-LAF Bedienungsanleitung

Omron

Omron HEM-629 Bedienungsanleitung

Omron

Omron RS3 Bedienungsanleitung

Omron

Omron HEM-6121-E Bedienungsanleitung

Omron

Omron Complete BP7900 Bedienungsanleitung

Omron

Omron M10-IT Bedienungsanleitung

Omron

Omron INTELLI 637IT Bedienungsanleitung

Omron

Omron i-Q142 Bedienungsanleitung

Omron

Omron IntelliSense HEM-712C Bedienungsanleitung

Omron

Omron HEM-711AC Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung

Spacelabs Healthcare

Spacelabs Healthcare 90217A Bedienungsanleitung