Omron NX502-1 Series Bedienungsanleitung

Machine Automation Controller

NX-series

CPU Unit

User's Manual

FINS Function

NX701-1720

NX701-1620

NX502-1£££

NX102-12££

NX102-11££

NX102-10££

NX102-90££

W596-E1-04

NOTE

transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or

otherwise, without the prior written permission of OMRON.

2. No patent liability is assumed with respect to the use of the information contained herein.

Moreover, because OMRON is constantly striving to improve its high-quality products, the infor-

mation contained in this manual is subject to change without notice.

3. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON as-

sumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

Trademarks

•Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan

and other countries for OMRON factory automation products.

•Microsoft, Windows, Excel, Visual Basic, and Microsoft Edge are either registered trademarks or

trademarks of Microsoft Corporation in the United States and other countries.

•EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation

GmbH, Germany.

•ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.

•The SD and SDHC logos are trademarks of SD-3C, LLC.

Other company names and product names in this document are the trademarks or registered trade-

marks of their respective companies.

Copyrights

•Microsoft product screen shots used with permission from Microsoft.

•This product incorporates certain third party software. The license and copyright information associ-

ated with this software is available at http://www.fa.omron.co.jp/nj_info_e/.

Introduction

Thank you for purchasing an NX-series CPU Unit.

This manual contains information that is necessary to use the NX-series CPU Unit. Please read this

manual and make sure you understand the functionality and performance of the NX-series CPU Unit

before you attempt to use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and maintaining FA systems.

• Personnel in charge of managing FA systems and facilities.

For programming, this manual is intended for personnel who understand the programming language

specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Applicable Products

This manual covers the following products.

NX-series CPU Unit

• NX701-1720

• NX701-1620

• NX502-1£££

• NX102-12££

• NX102-11££

• NX102-10££

• NX102-90££

Part of the specifications and restrictions for the CPU Units are given in other manuals. Refer to Rele-

vant Manuals on page 2 and Related Manuals on page 17.

Introduction

NX-series CPU Unit FINS Function User's Manual (W596)

Relevant Manuals

The following table provides the relevant manuals for the NX-series CPU Units. Read all of the man-

uals that are relevant to your system configuration and application before you use the NX-series CPU

Unit.

Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac

Studio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.

Purpose of use

Manual

Basic information

NX-series CPU Unit

Hardware User’s Manual

NX-series NX502 CPU Unit

Hardware User’s Manual

NX-series NX102 CPU Unit

Hardware User’s Manual

NJ/NX-series CPU Unit

Software User’s Manual

NJ/NX-series

Instructions Reference Manual

NJ/NX-series CPU Unit

Motion Control User’s Manual

NJ/NX-series

Motion Control Instructions Reference Manual

NJ/NX-series CPU Unit

Built-in EtherCAT Port User´s Manual

NJ/NX-series CPU Unit

Built-in EtherNet/IP Port User’s Manual

NJ/NX-series CPU Unit

OPC UA User's Manual

NX-series CPU Unit

FINS Function User's Manual

NJ/NX-series Database Connection CPU Units

User's Manual

NJ/NX-series

Troubleshooting Manual

Introduction to NX701 Controller ¡

Introduction to NX502 Controller ¡

Introduction to NX102 Controller ¡

Setting devices and hardware

¡¡¡

Using motion control ¡

Using EtherCAT ¡

Using EtherNet/IP ¡

Software settings

Using motion control ¡

Using EtherCAT ¡

Using EtherNet/IP ¡

Using OPC UA ¡

Using FINS ¡

Using the database connection service ¡

Writing the user program

¡ ¡

Using motion control ¡ ¡

Using EtherCAT ¡

Using EtherNet/IP ¡

Using OPC UA ¡

Using FINS ¡

Using the database connection service ¡

Programming error processing ¡

Relevant Manuals

2NX-series CPU Unit FINS Function User's Manual (W596)

Purpose of use

Manual

Basic information

NX-series CPU Unit

Hardware User’s Manual

NX-series NX502 CPU Unit

Hardware User’s Manual

NX-series NX102 CPU Unit

Hardware User’s Manual

NJ/NX-series CPU Unit

Software User’s Manual

NJ/NX-series

Instructions Reference Manual

NJ/NX-series CPU Unit

Motion Control User’s Manual

NJ/NX-series

Motion Control Instructions Reference Manual

NJ/NX-series CPU Unit

Built-in EtherCAT Port User´s Manual

NJ/NX-series CPU Unit

Built-in EtherNet/IP Port User’s Manual

NJ/NX-series CPU Unit

OPC UA User's Manual

NX-series CPU Unit

FINS Function User's Manual

NJ/NX-series Database Connection CPU Units

User's Manual

NJ/NX-series

Troubleshooting Manual

Testing operation and debugging

Using motion control ¡

Using EtherCAT ¡

Using EtherNet/IP ¡

Using OPC UA ¡

Using FINS ¡

Using the database connection service ¡

Learning about error management func-

tions and corrections of problems *1 r r r ¡

Maintenance

¡¡¡

Using motion control ¡

Using EtherCAT ¡

Using EtherNet/IP ¡

*1. Refer to the NJ/NX-series Troubleshooting Manual (Cat. No. W503) for the error management concepts and the error items. However,

refer to the manuals that are indicated with triangles for details on errors corresponding to the products with the manuals that are indi-

cated with triangles.

Relevant Manuals

NX-series CPU Unit FINS Function User's Manual (W596)

Terms and Conditions Agreement

Warranty, Limitations of Liability

Warranties

Exclusive Warranty

Omron’s exclusive warranty is that the Products will be free from defects in materials and work-

manship for a period of twelve months from the date of sale by Omron (or such other period ex-

pressed in writing by Omron). Omron disclaims all other warranties, express or implied.

Limitations

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF

THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based

on infringement by the Products or otherwise of any intellectual property right.

Buyer Remedy

Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally

shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-

plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal

to the purchase price of the non-complying Product; provided that in no event shall Omron be re-

sponsible for warranty, repair, indemnity or any other claims or expenses regarding the Products

unless Omron’s analysis confirms that the Products were properly handled, stored, installed and

maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return

of any Products by Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the use of Products in

combination with any electrical or electronic components, circuits, system assemblies or any other

materials or substances or environments. Any advice, recommendations or information given orally

or in writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

Terms and Conditions Agreement

4NX-series CPU Unit FINS Function User's Manual (W596)

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY

, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on

which liability is asserted.

Application Considerations

Suitability of Use

Omron Companies shall not be responsible for conformity with any standards, codes or regulations

which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buy-

er’s request, Omron will provide applicable third party certification documents identifying ratings and

limitations of use which apply to the Product. This information by itself is not sufficient for a complete

determination of the suitability of the Product in combination with the end product, machine, system, or

other application or use. Buyer shall be solely responsible for determining appropriateness of the par-

ticular Product with respect to Buyer’s application, product or system. Buyer shall take application re-

sponsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR

PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE

HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS

PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIP-

MENT OR SYSTEM.

Programmable Products

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or

any consequence thereof.

Disclaimers

Performance Data

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for

the user in determining suitability and does not constitute a warranty. It may represent the result of

Omron’s test conditions, and the user must correlate it to actual application requirements. Actual per-

formance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications

Product specifications and accessories may be changed at any time based on improvements and oth-

er reasons. It is our practice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifications of the Product may

Terms and Conditions Agreement

NX-series CPU Unit FINS Function User's Manual (W596)

be changed without any notice. When in doubt, special part numbers may be assigned to fix or estab-

lish key specifications for your application. Please consult with your Omron’s representative at any

time to confirm actual specifications of purchased Product.

Errors and Omissions

Information presented by Omron Companies has been checked and is believed to be accurate; how-

ever, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

Statement of security responsibilities for assumed use cases and

against threats

OMRON SHALL NOT BE RESPONSIBLE AND/OR LIABLE FOR ANY LOSS, DAMAGE, OR EX-

PENSES DIRECTLY OR INDIRECTLY RESULTING FROM THE INFECTION OF OMRON PROD-

UCTS, ANY SOFTWARE INSTALLED THEREON OR ANY COMPUTER EQUIPMENT, COMPUTER

PROGRAMS, NETWORKS, DATABASES OR OTHER PROPRIETARY MATERIAL CONNECTED

THERETO BY DISTRIBUTED DENIAL OF SERVICE ATTACK, COMPUTER VIRUSES, OTHER

TECHNOLOGICALLY HARMFUL MATERIAL AND/OR UNAUTHORIZED ACCESS.

It shall be the users sole responsibility to determine and use adequate measures and checkpoints to

satisfy the users particular requirements for (i) antivirus protection, (ii) data input and output, (iii) main-

taining a means for reconstruction of lost data, (iv) preventing Omron Products and/or software instal-

led thereon from being infected with computer viruses and (v) protecting Omron Products from unau-

thorized access.

Terms and Conditions Agreement

6NX-series CPU Unit FINS Function User's Manual (W596)

Manual Structure

Page Structure

The following page structure is used in this manual.

4-9

4 Installation and Wiring

NJ-series CPU Unit Hardware User’s Manual (W500)

gnitn

3-4

rel

noC

4-3 Mounting Units

The Units that make up an NJ-series Controller can be connected simply by pressing the Units together

and locking the sliders by moving them toward the back of the Units. The End Cover is connected in the

same way to the Unit on the far right side of the Controller.

1Join the Units so that the connectors fit exactly.

2The yellow sliders at the top and bottom of each Unit lock the Units together. Move the sliders

toward the back of the Units as shown below until they click into place.

Precautions for Correct UsePrecautions for Correct Use

4-3-1 Connecting Controller Components

Connector

Hook Hook holes

Slider

Lock

Release

Move the sliders toward the back

until they lock into place.

Level 1 heading

Level 2 heading

Level 3 heading

Level 2 heading

A step in a procedure

Manual name

Special information

Level 3 heading

Page tab

Gives the current

headings.

Indicates a procedure.

Icons indicate

precautions, additional

information, or reference

information.

Gives the number

of the main section.

This illustration is provided only as a sample. It may not literally appear in this manual.

The sliders on the tops and bottoms of the Power Supply Unit, CPU Unit, I/O Units, Special I/O

Units, and CPU Bus Units must be completely locked (until they click into place) after connecting

the adjacent Unit connectors.

Manual Structure

NX-series CPU Unit FINS Function User's Manual (W596)

Special Information

Special information in this manual is classified as follows:

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Version Information

Information on differences in specifications and functionality for Controller with different unit versions

and for different versions of the Sysmac Studio is given.

Precaution on Terminology

In this manual, "download" refers to transferring data from the Sysmac Studio to the physical Control-

ler and "upload" refers to transferring data from the physical Controller to the Sysmac Studio.

For the Sysmac Studio, "synchronization" is used to both "upload" and "download" data. Here,

"synchronize" means to automatically compare the data for the Sysmac Studio on the computer with

the data in the physical Controller and transfer the data in the direction that is specified by the user.

Manual Structure

8NX-series CPU Unit FINS Function User's Manual (W596)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Controller Handbücher

Omron

Omron NX Series Bedienungsanleitung

Omron

Omron C200HX Series Stücklistenhandbuch

Omron

Omron C200HW-PRM21 Installationshandbuch

Omron

Omron E5CN-HT Gebrauchs- und Pflegehandbuch

Omron

Omron SYSMAC CJ1W-EIP21 Installationshandbuch

Omron

Omron G3ZA Bedienungsanleitung

Omron

Omron SYSMAC NJ Series Bedienungsanleitung

Omron

Omron V600-CD1D-V2 Bedienungsanleitung

Omron

Omron NX701-17 Series Bedienungsanleitung

Omron

Omron CS1 - Bedienungsanleitung

Omron

Omron YRC Bedienungsanleitung

Omron

Omron CS1G-CPU42H Stücklistenhandbuch

Omron

Omron E5CK-T Bedienungsanleitung

Omron

Omron E5EK Bedienungsanleitung

Omron

Omron SYSMAC CV500 Bedienungsanleitung

Omron

Omron Sysmac CP1H Bedienungsanleitung

Omron

Omron SYSMAC CS1G Bedienungsanleitung

Omron

Omron E5CN-U - Bedienungsanleitung

Omron

Omron CJ Series Bedienungsanleitung

Omron

Omron TRAJEXIA-PLC Bedienungsanleitung

Omron

Omron CK3E Series Bedienungsanleitung

Omron

Omron E5ZN Series Bedienungsanleitung

Omron

Omron ES100P Bedienungsanleitung

Omron

Omron E5EK Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch