Omron EQUO Series Benutzerhandbuch

・To directly connect KM-N1-FLK, KM-N2-FLK and

KM-N3-FLK to ZN-KMX21-□, please purchase a

separately sold dedicated connection cable

ZN9-KMC30-N.

Communications Setup for KM-N1 (e.g. configuring communication speed as 38400bps)

After the power is turned on, press and hold the MODE key to enter the "Setting Mode". In the Common Setting, configure the communication speed as 38.4kbps. The

communication address of the enabled circuit must be a serial number from the circuit A and must not be the same as those of other circuits and/or connected KM series

units.

Communications Setup for KM-N2/N3 (e.g. configuring communication speed as 38400bps)

After the power is turned on, press and hold the MODE key to enter the "Setting Mode". Type the password ("0001" by default) In the Common Setting, configure the protocol

as CompoWay/F, communication speed as 38.4kbps, data length as 7 bits, and stop bits as 2 bits. The communication address of the enabled circuit must be a serial number

from the circuit A and must not be the same as those of other circuits and/or connected KM series units.

Terminal names may differ depending on the model type.

See below to make communication setting of the KM series.

Unit No.: A consecutive number starting from 1.

To change the starting number (other than 1), other setting is required.

Baud rate: 38400 bps

Data bit length: 7-bit

Stop bit length: 2-bit

Vertical parity: even

Power Monitor KM-N1-FLK,KM-N2-FLK,

KM-N3-FLK

For further information, refer to the Instruction Sheet in the package

and a user's manual.

Recommended SD card:

HMC-SD291(2GB)/HMC-SD491(4GB)

Recommended SD card:

HMC-SD291(2GB)/HMC-SD491(4GB)

User’ s Manual is downloaded in a PC from following URL.

http://www.fa.omron.co.jp/products/family/3080/download/manual.html

Installing the software Multi Data Viewer Light

Visit the following link and download the installation ﬁle.

http://www.fa.omron.co.jp/multi-d-v-e

First, you need to install the software Multi Data Viewer Light to your computer.

Multi Data Viewer Light comprises the following: summary/display tool, setting/logging tool and instant value display tool.

■System Requirements

■Installation

OS: Windows 7 SP1/Windows 10

* .NET Framework 3.5 SP1 or later is required.

CPU: Intel(x86)-compatible processor, 1.5GHz or higher

Memory: 2GB (32-bit OS)/3GB (64-bit OS), 3GB or higher recommended

Extract the installation ﬁle to any folder, and run Setup.exe in the folder. The screen on the right appears.

For installation, you must log in with Administrator permissions.

.NET Framework 3.5 SP1 in your computer to install the software must be enabled.

For how to install and use Multi Data Viewer Light, refer to Multi Data Viewer Light software manual in the

installation ﬁle.

HDD: 1GB or more free disc space required

Display: Resolution of 1024x768 or higher, 65536 colors (16-bit color) or more

LAN port: 10BASE-T/100BASE-TX supported (for network connection)

SD card reader/SD card slot: For loading data from the unit

Authorized Distributor:

In the interest of product improvement,

specifications are subject to change without notice.

OMRON Corporation Industrial Automation Company

OMRON ELECTRONICS LLC

2895 Greenspoint Parkway, Suite 200

Hoffman Estates, IL 60169 U.S.A.

Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69, 2132 JD Hoofddorp

The Netherlands

Tel: (31)2356-81-300/Fax: (31)2356-81-388

Contact: www.ia.omron.com

Kyoto, JAPAN

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road # 05-05/08 (Lobby 2),

Alexandra Technopark,

Singapore 119967

Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

PuDong New Area, Shanghai, 200120, China

Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Andere Handbücher für EQUO Series

Dieses Handbuch passt für folgende Modelle

Andere Omron Messgerät Handbücher

Omron

Omron Z300 Bedienungsanleitung

Omron

Omron Sti G9SX-SM032 Series Bedienungsanleitung

Omron

Omron ZX-GT - Bedienungsanleitung

Omron

Omron K3MA-L Bedienungsanleitung

Omron

Omron H7CX - Bedienungsanleitung

Omron

Omron K3MA-J Series Bedienungsanleitung

Omron

Omron K7GE-MG Bedienungsanleitung

Omron

Omron H7E Bedienungsanleitung

Omron

Omron K6CM series Benutzerhandbuch

Omron

Omron V700-HMD11 Bedienungsanleitung

Omron

Omron K3NC Bedienungsanleitung

Omron

Omron E3NC-SH Series Bedienungsanleitung

Omron

Omron K3NC Bedienungsanleitung

Omron

Omron SYSMAC Series Gebrauchs- und Pflegehandbuch

Omron

Omron KM1 Bedienungsanleitung

Omron

Omron EQUO Series Bedienungsanleitung

Omron

Omron K3HB-R Bedienungsanleitung

Omron

Omron K3NX Bedienungsanleitung

Omron

Omron K3HB-S Bedienungsanleitung

Omron

Omron K3HB-X Bedienungsanleitung

Omron

Omron Sti G9SX-LM224-F10 Series Bedienungsanleitung

Omron

Omron K3HB-C Series Bedienungsanleitung

Omron

Omron G9SX Series Bedienungsanleitung

Omron

Omron K3MA-J Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung