Omron E5CSZ Bedienungsanleitung

Temperature Controllers E5CSZ 1

Temperature Controllers

E5CSZ

Easy Setting Using DIP Switch and Simple

Functions in DIN 48 ×48 mm-size

Temperature Controllers

• Easy setting using DIP and rotary switches.

• Clearly visible digital display with character height of 13.5 mm.

• Models available with black or white cases.

• RoHS compliant (Scheduled for January 2006).

Model Number Structure

■Model Number Legend

Models with Terminal Blocks

1. Output type

R: Relay

Q: Voltage for driving SSR

2. Number of alarms

Blank: No alarm

1: 1 alarm

3. Input type

T: Thermocouple/platinum resistance

thermometer (multi-input)

4. Power supply voltage

Blank: 100 to 240 VAC

D: 24 VAC/VDC

5. Case color

Blank: Light gray

B: Black

Note: A functional explanation is provided here for illustration, but models are not necessarily available for all possible combinations. Refer to

Ordering Information when ordering.

Example

•Relay control output, one alarm output, multi-input, light gray: E5CSZ-R1T.

1 2 3 4 5

E5CSZ-@@@@-@

2Temperature Controllers E5CSZ

Ordering Information

■List of Models

Note: Modules are available with a black case. Add the suffix “-B” to models with a black case.

■Accessories (Order Separately)

Protective Cover

Terminal Cover

Specifications

■Ratings

Size Power supply

voltage Number of

alarm points Control output TC/Pt multi-input

Case color: Light gray

1/16 DIN

48 ×48 ×78 mm

(W ×H ×D)

100 to 240 VAC 0 Relay E5CSZ-RT

Voltage (for driving SSR) E5CSZ-QT

1 Relay E5CSZ-R1T

Voltage (for driving SSR) E5CSZ-Q1T

24 VAC/VDC 0 Relay E5CSZ-RTD

Voltage (for driving SSR) E5CSZ-QTD

1 Relay E5CSZ-R1TD

Voltage (for driving SSR) E5CSZ-Q1TD

Type Model

Hard Protective Cover Y92A-48B

Model

E53-COV10

Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC/VDC, 50/60 Hz

Operating voltage range 85% to 110% of rated supply voltage

Power consumption 5 VA 3 VA/2 W

Sensor input Multi-input (thermocouple/platinum resistance thermometer) type: K, J, L, Pt100

Control

output Relay output SPST-NO, 250 VAC, 3A (resistive load)

Voltage output (for driving the SSR) 12 VDC, 21 mA (with short-circuit protection circuit)

Control method ON/OFF or 2-PID (with auto-tuning)

Alarm output SPST-NO, 250 VAC, 1A (resistive load)

Setting method Digital setting using front panel keys

Indication method 3.5 digit, 7-segment digital display (character height: 13.5 mm) and deviation indicators

Other functions •Setting change prohibit (key protection)

•Input shift

•Temperature unit change (°C/°F)

•Direct/reverse operation

•Temperature range, Sensor switching (K/J/L, Pt100)

•Switching is performed between a thermocouple and platinum resistance thermometer for multi-input models.

•Control period switching

•8-mode alarm output

•Sensor error detection

Ambient temperature −10 to 55°C (with no condensation or icing)

Ambient humidity 25% to 85%

Storage temperature −25 to 65°C (with no condensation or icing)

Temperature Controllers E5CSZ 3

■Characteristics

Note: 1. The following exceptions apply to thermocouples.

•L: ±2°C ±1 digit max.

2. The following exceptions apply to platinum resistance thermometers.

Input set values 0, 1, 2, 3 for E5CSZ: 0.5% FS ±1 digit max.

Input set value 1 for E5CSZ: 0.5% FS ±1 digit max.

■Electrical Life Expectancy Curve for Relays (Reference Values)

Setting accuracy Thermocouple (See note 1.): (±0.5% of indication value or ±1°C, whichever is greater) ±1 digit max.

Platinum resistance thermometer (See note 2.): (±0.5% of indication value or ±1°C, whichever is greater) ±1 digit max.

Indication accuracy

(ambient temperature of 23°C)

Influence of temperature Thermocouple inputs: (±1% of PV or ±4°C, whichever is greater) ±1 digit max.

Platinum resistance thermometer inputs: (±1% of PV or ±2°C, whichever is greater) ±1 digit max.

Influence of voltage

Hysteresis (for ON/OFF control) 0.1% FS for multi-input (thermocouple/platinum resistance thermometer) models

Proportional band (P) 1 to 999°C (automatic adjustment using auto-tuning/self-tuning)

Integral time (I) 1 to 1,999 s (automatic adjustment using auto-tuning/self-tuning

Derivative time (D) 1 to 1,999 s (automatic adjustment using auto-tuning/self-tuning)

Alarm output range Absolute-value alarm: Same as the control range

Other: 0% to 100% FS

Alarm hysteresis: 0.2°C or °F (fixed)

Control period 2/20 s

Sampling period 500 ms

Insulation resistance 20 MΩmin. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between current-carrying terminals of different polarity

Vibration

resistance Malfunction 10 to 55 Hz, 20 m/s2for 10 min each in X, Y, and Z directions

Destruction 10 to 55 Hz, 0.75-mm single amplitude for 2 hr each in X, Y, and Z directions

Shock resistance Malfunction 100 m/s2min., 3 times each in 6 directions

Destruction 300 m/s2min., 3 times each in 6 directions

Life expectancy Electrical 100,000 operations min. (relay output models)

Weight Approx. 120 g (Controller only)

Degree of protection Front panel: Equivalent to IP50; Rear case: IP20; Terminals: IP00

Memory protection EEPROM (non-volatile memory) (number of writes: 1,000,000)

EMC EMI Radiated: EN 55011 Group 1 Class A

EMI Conducted: EN 55011 Group 1 Class A

ESD Immunity: EN 61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Radiated Electromagnetic Field Immunity: EN 61000-4-3: 10 V/m (80-1000 MHz, 1.4-2.0 GHz amplitude modulated) (level 3)

10 V/m (900 MHz pulse modulated)

Conducted Disturbance Immunity: EN 61000-4-6: 3 V (0.15 to 80 MHz) (level 2)

Noise Immunity (First Transient Burst Noise): EN 61000-4-4

Burst Immunity: 2 kV power-line (level 3), 1 kV I/O signal-line (level 3)

Surge Immunity: EN 61000-4-5: Power line: Normal mode 1 kV; Common mode 2 kV

Output line (relay output): Normal mode 1 kV; Common mode 2 kV

Voltage Dip/Interrupting Immunity: EN 61000-4-11 0.5 cycle, 100% (rated voltage)

Approved standards UL 61010C-1 (listing)

CSA C22.2 No.1010-1

Conformed standards EN 61326, EN 61010-1, IEC 61010-1

VDE 0106 Part 100 (finger protection), when the terminal cover is mounted.

500

300

100

10123456

Switching current (A)

Life (×104operations)

E5CSZ

250 VAC, 30 VDC

(resistive load)

cosφ= 1

4Temperature Controllers E5CSZ

■Temperature Range

Multi-input (Thermocouple/Platinum Resistance Thermometer) Models

•Using Thermocouple Sensors, Control Mode Switch 5: OFF

•Using Platinum Resistance Thermometers, Control Mode Switch 5: ON

Input K J L

1,700

1,600

1,500

1,400

1,300

1,200

1,100

1,000

900

800

700

600

500

400

300

200

100

−100

Temperature

range

(selected

using switch)

1,300

850 850

(Default setting: 0)

199.9 199.9

0.0 0.0

−99 −99 −99

Setting number 01234

Minimum setting unit 1°C0.1°C1°C0.1°C1°C

Input Pt100

Temperature

range

(selected

using switch)

1,000

900

800

700

600

500

400

300

200

100

−100

850

400

(Default setting: 0) 199.9 200

0.0 0 0

−99 −99

Setting number 01234

Minimum setting unit 1°C0.1°C1°C

The shaded value indicates the default setting status.

Do not set the temperature range switch to between No. 5 and No. 9.

The shaded value indicates the default setting status.

Do not set the temperature range switch to between No. 5 and No. 9.

Temperature Controllers E5CSZ 5

External Connection Diagram

Note: 1. The voltage output (12 VDC, 21 mA) is not electrically isolated from the internal circuits. When using a grounding thermocouple, do not

connect output terminals 1 or 2 to ground. Otherwise, unwanted current paths will cause measurement errors.

2. Models with 100 to 240 VAC and 24 VAC/VDC are separate. Models using 24 VDC have no polarity.

3. The number of alarm outputs (none or 1) depends on the model.

Nomenclature

E5CSZ Models with Terminal Blocks

12 VDC,

21 mA

Alarm output

Alarm output 1 (See note 3.

)

Relay output

models

Voltage output

models

(See note 1.)

Thermocouple/

platinum resistance thermometer multi-input

100 to 240 VAC, 50/60 Hz

(24 VAC/VDC)

(See note 2.)

Thermocouple

input

Relay outputVoltage output

Platinum resistance

thermometer input

E5CSZ

Output indicator

Alarm indicators

Temperature display

Up Key

Down Key

Deviation indicators

Mode indicators

Mode Key

Lock Release Key

6Temperature Controllers E5CSZ

Operation

E5CSZ

Settings before Turning ON the Power

E5CSZ

Remove the E5CSZ from the case to make the settings.

1. Insert the tool into the two tool insertion holes (one on the top and

one on the bottom) and release the hooks.

2. Insert the tool in the gap between the front panel and rear case,

and pull out the front panel slightly. Grip the front panel and pull

out fully. Be sure not to impose excessive force on the panel.

3. When inserting the E5CSZ, check to make sure that the sealing

rubber is in place and push the E5CSZ toward the rear case until

it snaps into position. While pushing the E5CSZ into place, push

down on the hooks on the top and bottom surfaces of the rear

case so that the hooks are securely locked in place. Make sure

that electronic components do not come into contact with the

case.

Note: 1. The alarm mode switch is not provided on models without an alarm.

2. The INIT switch is always OFF during normal operation.

E5CSZ

Deviation indicators

The indicator lights when the PV is greater than

the SP and the indicator lights when the PV is

less than the SP. The indicator (green) lights

when the deviation is less than 0.25% FS.These

indicators flash during ST (self-tuning)/AT (auto-

tuning).

Mode indicators

The SP indicator lights when the setting

temperature is being displayed.The ALM

indicator lights when the alarm value is

being displayed.

PV, SP, Alarm Value, Input Shift Display

Alarm indicator

ALM1 (Alarm 1): Lights when the alarm 1

output is ON.

Up Key

Pressing the Up Key increases the

SP/alarm value display. Keeping the Up

Key pressed continues to increase the

display value.When the internal protect

switch is ON, press the Up Key while

holding down the Lock Release Key.

Output indicator

Lights when the control output is ON.

The display switches each time the

Key is pressed.

Lock Release Key

When the protect switch is ON, the set

value can be changed by pressing the Up

and Down Keys while holding down the

Lock Release Key.

Down Key

Pressing the Down Key decreases the

SP/alarm value display. Keeping the Down

Key pressed continues to decrease the

display value.When the internal protect

switch is ON, press the Down Key while

holdin

down the Lock Release Key.

When the power is turned ON, normally the

display will use the display items in the following

order each time the Mode Key is pressed.

Mode Key

Alarm value 1

Input shift value

Power ON

Press the Key.

This item is not displayed when

the Control Mode Switch 4 is OFF.

Flat-blade screwdriver

(Unit: mm)

0.4 2.0

20 min.

(3)

(1)

(2)

Tool hole

X123456

Alarm mode switch (See note 1.)

Temperature range switch

Control mode switches

INIT switch

(See note 2.)

Protect switch

Temperature Controllers E5CSZ 7

1. Sensor Type Specification

Select the number on the temperature range switch to change

the temperature range.

Multi-input (Thermocouple/Platinum

Resistance Thermometer) Models

• Using Thermocouple Sensors, Control Mode Switch 5: OFF

•The control range is −20°C to +20°C of the input temperature

range.

Note: 1. The input indication range is the range that can be displayed for

the control range (−99 to 1999). If the input is within the control

range but exceeds the display range (−99 to 1999), values

below −99 will be displayed as “[[[“ and values above 1,999

will be displayed as “]]].”

2. If unit is changed to 1 degree when the SP and alarm value for

the temperature range are displayed in 0.1-units from 0.0 to

199.9 or 0.0 to 99.9, the values will be multiplied by 10 (e.g., 0.5

becomes 5). If the unit is changed in the reverse direction, the

values will be divided by 10. After changing the range, set the

SP and alarm value again.

• Using Platinum Resistance Thermometers,

Control Mode Switch 5: ON

•The control range is −20°C to +20°C of the input temperature

range.

Note: 1. The input indication range is the range that can be displayed for

the control range (−99 to 1999). If the input is within the control

range but exceeds the display range (−99 to 1999), values

below −99 will be displayed as “[[[“ and values above 1,999

will be displayed as “]]].”

2. If unit is changed to 1 degree when the SP and alarm value for

the temperature range are displayed in 0.1-units from 0.0 to

199.9 or 0.0 to 99.9, the values will be multiplied by 10 (e.g., 0.5

becomes 5). If the unit is changed in the reverse direction, the

values will be divided by 10. After changing the range, set the

SP and alarm value again.

Input K J L

range

1,700

1,600

1,500

1,400

1,300

1,200

1,100

1,000

900

800

700

600

500

400

300

200

100

−100

1,300

850 850

199.9 199.9

0.0 0.0

−99 −99 −99

Setting number 01234

Input Pt100

range

1,000

900

800

700

600

500

400

300

200

100

−100

850

400

199.9 200

0.0 0 0

−99 −99

Setting number 01234

The shaded value indicates the

default setting status.

Do not set the temperature range switch

to between No. 5 and No. 9.

The shaded value indicates the

default setting status.

Do not set the temperature range switch

to between No. 5 and No. 9.

Mode Key Display Order

•If the SP falls outside the temperature

range when the temperature range is

changed, the SP will be displayed first.

The SP will be changed automatically

either to the minimum value or the

maximum value, whichever is nearest.

•If the alarm value falls outside the

temperature range when the

temperature range is changed, the

alarm value will be displayed first. The

alarm value will be changed

automatically to the maximum value in

the new temperature range.

Alarm value 1

Input shift value

Power ON

Press the Key.

8Temperature Controllers E5CSZ

2. Operation Settings

Use the control mode switches ( ) to change the

control mode. (All switches are OFF for the default settings.)

3. Alarm Modes

Select the number of the alarm mode switch when changing

the alarm mode. (The default is 2).

Note: 1. No alarm. The alarm value (alarm operation display) will not

be displayed when the setting is 0 or 9 even if the selection

key is pressed.

Alarm Setting Range

X: 0 to FS (full scale); Y: Within temperature range

The value of X is the deviation setting for the SP (set point).

2. Standby Sequence Function (The standby sequence

operates when the power is turned ON.)

For details on the position of the temperature range switch, control mode switches, and alarm mode switch, refer to page 6.

Function selection 1 2 3 4 5 6

ON/OFF

PID PID control ON

ON/OFF control OFF

Control

period 2 s ON

20 s OFF

Direct/

reverse

opera-

tion

Direct operation

(cooling) ON

Reverse operation

(heating) OFF

Input

shift

display

Enabled ON

Disabled OFF

Tempera-

ture

Sensor

selection

Multi-input

(thermo-

couple/

platinum

resistance

thermome-

ter)

Platinum

resis-

tance

thermom-

eter

input

Thermo-

couple

input OFF

Temper-

ature

unit

°FON

°COFF

654321

ON Set

value Alarm type Alarm output operation

0, 9 Alarm function OFF OFF

1Upper- and lower-

limit

2Upper-limit

3Lower-limit

4Upper- and lower-

limit range

Upper- and lower-

limit with standby

sequence (See note

2.)

6Upper-limit with

standby sequence

(See note 2.)

7Lower-limit with

standby sequence

(See note 2.)

8Absolute-value

upper-limit

OFF

Upper-limit

alarm

Lower-limit

alarm

Alarm

output ON

OFF

Upper-limit

alarm

Lower-limit

alarm

Alarm

output ON

OFF

Rising Temperature Dropping Temperature

Note: Turn OFF the power before changing the DIP switch settings on the E5CSZ. Each of the switch settings will be enabled after the power is

turned ON.

Temperature Controllers E5CSZ 9

4. Using the Control Mode Switches

(1) Using ON/OFF Control and PID Control

ON/OFF Control

The control mode is set to ON/OFF control as the default setting. To perform cooling control of freezers, etc., turn ON switch 3.

PID Control

Turn ON switch 1 to use PID control.

1. Set the control period.

Performing Control via Relay Output, External Relay, or

Conductor

Switch 2: OFF (control period: 20 s)

Quick Control Response Using an SSR

Switch 2: ON (control period: 2 s)

2. Set direct/reverse operation for the output.

Performing Heating Control for Heaters

Switch 3: OFF

Performing Cooling Control for Freezers

Switch 3: ON

654321

Switch 1 OFF: ON/OFF control

OFF

ONControl output

654321

OFF

ONControl output

654321

Switch 1 ON: PID control

654321

OFF

ONControl output

20 s

654321

OFF

ONControl output

2 s

654321

100%

Output level

654321

100%

Output level

ST (Self-tuning) Features

ST (self-tuning) is a function that finds PID constants by

using step response tuning (SRT) when Controller

operationbegins orwhenthesetpoint ischanged.Once

the PID constants have been calculated, ST is not

executed when the next control operation is started as

long as the set point remains unchanged. When the ST

function is in operation, be sure to turn ON the power

supply of the load connected to the control output

simultaneously with or before starting Controller

operation.

Executing AT (Auto-tuning)

AT (auto-tuning) is executed by pressing the UUp and DDown Keys for at

least 2 s while the PV is displayed. The deviation indicators flash during auto-

tuning (AT) execution. AT will be cancelled by performing the same operation

that AT is executing during AT operation. Flashing stops when AT is completed.

Note: One of the deviation indicators (▲■▼) will flash.

AT execution in progress

Press for

at least 2 s.

Press for

at least 2 s.

AT execution in progress

AT execution

AT cancelled

10 Temperature Controllers E5CSZ

(2) Using the E5CSZ in Devices for Fahrenheit-scale Users

(Displaying in °F)

Turn ON switch 6 to display temperatures in °F.

Temperature Range for °F

The temperature is set to °F using the same temperature range switch as °C.

Note: The control range for multi-input (thermocouple/platinum resistance thermometer) models is −40 to +40°F of each temperature range.

(3) Setting Input Shift

Turn ON switch 4, and after turning ON the power, press the Mode

Key until h0 (indicates input shift of 0) is displayed. Press the Up and

Down Keys to set the shift value.

Shift Example

Note: When control mode switch 4 is turned OFF (no input shift

display), the input shift is not displayed but the shift value is

enabled. To disable input shift, set the input shift value to h0.

The shift range depends on the setting unit.

5. Protect Switch

When the protect switch is ON, Up Key and Down Key operations are prohibited to prevent setting mistakes.

654321

Multi-input (Thermocouple/

Platinum Resistance

Thermometer)

Control mode switch 5: OFF

Multi-input (Thermocouple/

Platinum Resistance

Thermometer)

Control mode switch 5: ON

Set-

ting °FSet-

ting °F

0K −99 to 1999 0 Pt100 −99 to 1500

1 0.0 to 199.9 1 0.0 to 199.9

2J −99 to 1500 2 −99 to 99

3 0.0 to 199.9 3 0 to 200

4L −99 to 1500 4 0 to 400

654321

Input shift display Measured temperature Temperature

display

h0 (no shift) 100°C 100°C

h9 (+9°C shift) 100°C 109°C

l9 (−9°C shift) 100°C91°C

Setting unit 1°C0.1°C

Compensation range −99 to +99°C−9.9 to +9.9°C

Input shift display L99 to H99 L9.9 to H9.9

X123456

Protect Switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Temperaturregler Handbücher

Omron

Omron E5GN Bedienungsanleitung

Omron

Omron E5AN Bedienungsanleitung

Omron

Omron E5CWL Gebrauchsanweisung

Omron

Omron E5GN Bedienungsanleitung

Omron

Omron E5ZN Series Bedienungsanleitung

Omron

Omron E5CSL Bedienungsanleitung

Omron

Omron E5CS Bedienungsanleitung

Omron

Omron CELCIUX Bedienungsanleitung

Omron

Omron E5CC-U Bedienungsanleitung

Omron

Omron E5C series Bedienungsanleitung

Omron

Omron E5CZ Bedienungsanleitung

Omron

Omron EJ1N-TC4 Bedienungsanleitung

Omron

Omron E5CC-800 Bedienungsanleitung

Omron

Omron E5 N H - Stücklistenhandbuch

Omron

Omron E5 D Series Bedienungsanleitung

Omron

Omron E5CN Bedienungsanleitung

Omron

Omron E5GN Bedienungsanleitung

Omron

Omron E5C series Bedienungsanleitung

Omron

Omron E5EC-T Bedienungsanleitung

Omron

Omron E5CSL Bedienungsanleitung

Omron

Omron E5AN Bedienungsanleitung

Omron

Omron E5ZE-8 Gebrauchs- und Pflegehandbuch

Omron

Omron E5AX-P Series Bedienungsanleitung

Omron

Omron E5ZN Series Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema

Opt Lasers

Opt Lasers TEC-8A-24V-PID-HC Bedienungsanleitung

Vaillant

Vaillant VR 92/3 Bedienungsanleitung

Vector

Vector TCY-FT-U Bedienungsanleitung