Omron NA-series Gebrauchsanweisung
Programmable Terminal NA-series
Practices Guide
Creating Basic Pages
NA5-15W□□□□
NA5-12W□□□□
NA5-9W□□□□
NA5-7W□□□□
V421-E1-01
2
■Introduction
This guide provides reference information on editing pages of the NA. It does not provide safety
information.
Be sure to obtain the NA-series Programmable Terminal User's Manuals, read and understand the safety
points and other information required for use, and test sufficiently before actually using the equipment.
(1) All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of OMRON.
(2) No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice. Every precaution has been taken in the preparation
of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from the use of the information contained in this
publication.
(3) Trademarks
• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan
and other countries for OMRON factory automation products.
• Windows, Visual Basic, and Excel are either registered trademarks or trademarks of Microsoft
Corporation in the United States, Japan, and other countries.
• Other company names and product names in this document are the trademarks or registered
trademarks of their respective companies.
• Microsoft product screen shots reprinted with permission from Microsoft Corporation.
• The product pictures and drawings contained in this document are the graphical images, which may
be different from the actual articles.
3
Terms and Conditions Agreement
Warranty, Limitations of Liability
Warranties
Exclusive Warranty
Omron’s exclusive warranty is that the Products will be free from defects in materials and
workmanship for a period of twelve months from the date of sale by Omron (or such other period
expressed in writing by Omron). Omron disclaims all other warranties, express or implied.
Limitations
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED,
ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF
THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses
based on infringement by the Products or otherwise of any intellectual property right.
Buyer Remedy
Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or
credit Buyer an amount equal to the purchase price of the non-complying Product; provided
that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the
Products were properly handled, stored, installed and maintained and not subject to
contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not
be liable for the suitability or unsuitability or the results from the use of Products in
combination with any electrical or electronic components, circuits, system assemblies or any
other materials or substances or environments. Any advice, recommendations or
information given orally or in writing, are not to be construed as an amendment or addition to
the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published
information.
Limitation on Liability; Etc
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER
SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT
LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the
Product on which liability is asserted.
4
Application Considerations
Suitability of Use
Omron Companies shall not be responsible for conformity with any standards, codes or
regulations which apply to the combination of the Product in the Buyer’s application or use
of the Product. At Buyer’s request, Omron will provide applicable third party certification
documents identifying ratings and limitations of use which apply to the Product. This
information by itself is not sufficient for a complete determination of the suitability of the
Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application
responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO
LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS
BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
Programmable Products
Omron Companies shall not be responsible for the user’s programming of a programmable
Product, or any consequence thereof.
Disclaimers
Performance Data
Data presented in Omron Company websites, catalogs and other materials is provided as a
guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of Omron’s test conditions, and the user must correlate it to actual
application requirements. Actual performance is subject to the Omron’s Warranty and
Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based on
improvements and other reasons. It is our practice to change part numbers when published
ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in
doubt, special part numbers may be assigned to fix or establish key specifications for your
application. Please consult with your Omron’s representative at any time to confirm actual
specifications of purchased Product.
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be
accurate; however, no responsibility is assumed for clerical, typographical or proofreading
errors or omissions.
5
Contents
Terms and Conditions Agreement........................................................................3
Warranty, Limitations of Liability .............................................................................................3
Application Considerations .....................................................................................................4
Disclaimers .............................................................................................................................4
Related Manuals .....................................................................................................7
１Introduction....................................................................................................8
１-１Overview ..................................................................................................................8
１-２System Configuration ...............................................................................................9
１-３Procedure to Create Pages....................................................................................10
２Project Creation ...........................................................................................11
２-１Creating Projects....................................................................................................11
２-２Starting up Sysmac Studio.....................................................................................12
２-３Registering Global Variables..................................................................................14
３Basic Settings ..............................................................................................15
３-１Adding an NA .........................................................................................................15
３-２Sysmac Studio Window Components for Creating NA Pages...............................17
３-３NA Communication Settings ..................................................................................18
３-４Registering Variables .............................................................................................19
４Creating Basic Pages..................................................................................22
４-１Adding Pages .........................................................................................................23
４-２Creating ON/OFF Switches....................................................................................27
４-３Creating Bit Lamps.................................................................................................30
４-４Creating Labels ......................................................................................................34
４-５Off-line Testing 1 ....................................................................................................36
４-６Creating the Button to Switch Pages .....................................................................37
４-７Creating Data Display/Edit Objects........................................................................41
４-８Creating Gauges ....................................................................................................46
6
４-９Off-line Testing 2 ....................................................................................................48
４-１０ Creating Alarms......................................................................................................49
４-１１ Displaying PDF Files ..............................................................................................55
４-１２ Displaying Videos...................................................................................................56
５Check on the Actual Unit ............................................................................57
５-１Creating a Ladder...................................................................................................57
５-２Synchronization ......................................................................................................58
５-３Operations ..............................................................................................................60
６Integrated Simulation..................................................................................61
７Reference Materials.....................................................................................62
７-１Correspondence Table of Data Types between the NJ-series Controllers and the
PTs .........................................................................................................................62
７-２NA Series Lineup....................................................................................................63
Revision History ...................................................................................................64
7
Related Manuals
The following manuals are related to this manual.
Cat.No. Model Manual Name
SBCA-362 SYSMAC-SE2□□□ Sysmac Studio Version 1 Operation Manual
SBSA-545 NA5-15W□□□□
NA5-12W□□□□
NA5-9W□□□□
NA5-7W□□□□
NA-series Programmable Terminal Hardware User’s
Manual
SBSA-546 NA5-15W□□□□
NA5-12W□□□□
NA5-9W□□□□
NA5-7W□□□□
NA-series Programmable Terminal Software User’s
Manual
SBSA-547 NA5-15W□□□□
NA5-12W□□□□
NA5-9W□□□□
NA5-7W□□□□
NA-series Programmable Terminal Device Connection
User’s Manual
SBSA-548 NA5-15W□□□□
NA5-12W□□□□
NA5-9W□□□□
NA5-7W□□□□
NA-series Programmable Terminal Startup Guide
8
１ Introduction
In this chapter, you will learn what information is required to create the pages on the
NA-series PTs while confirming the contents included in this guide. You will also learn the
system configuration required and the procedure for creating pages.
１-１ Overview
１-１-１ Overview
As summarized below, this guide explains the procedures to perform settings of the NA
series, to create basic pages, and to transfer them to the actual unit.
１．Creating Projects
・Creating a Project
・Registering Global Variables
・NA Communication Settings
・Registering Variables
２．Creating Basic Pages
・Adding Pages
・ON/OFF Switches
・Bit Lamps
・Labels
・Off-line Testing
・Button to Switch Pages
・Data Edit/Display
・Gauges (Graphs)
・Alarms
・PDF Display
・Video Display
・Integrated Simulation
３．Check on Actual Unit
・Synchronization
・Operation
１-２
S
S
ystem
C
１-２-１
S
The NA s
e
the figure
s
This guid
e
single NJ i
The figure
The Ether
n
for the scr
e
A
singl
e
IP
C
onfigura
t
S
ystem Co
n
e
ries can in
c
s
below.
e
deals with
t
s connecte
d
below sho
w
n
et is used
f
e
en data tr
a
e
project
Address: 192.1
t
ion
n
figuration
c
lude multipl
t
he projects
d
with a sin
g
w
s the confi
g
f
or commun
a
nsfer from
t
68.250.10
IP
IP Add
n
e NJ units
o
for the one
-
g
le NA.
g
uration us
e
ications bet
w
t
he PC.
HUB
Address: 192.1
6
d
ress: 192.168.
2
Port１
o
r NA units
w
-
to-one (1:1
e
d in this gu
i
w
een the N
J
A
single
p
6
8.250.20
2
50.1
w
ithin a sin
g
)
NJ-NA co
n
de.
J
series an
d
p
roject
g
le project a
s
n
figuration
w
d
NA series,
9
s
shown in
w
here a
as well as
1
1
0
１-３ Pr
o
１
-
C
r
D
e
S
p
C
r
E
d
A
B
u
In
T
C
h
S
y
o
cedure t
o
-３-１ Pro
c
r
eate an NJ
p
e
fine global
v
p
ecify the c
o
r
eate neces
s
d
it pages.
dd an NA to
u
ild the NA p
tegrated NJ
T
ransfe
heck the op
e
y
nchronizatio
o
Create
c
edure to
C
p
roject.
v
ariables for
t
o
nfiguration a
s
ary global v
a
the NJ proje
c
roject.
and NA simul
e
ration.
n
Pages
C
reate Pa
g
t
he NJ.
nd settings f
a
riables on th
e
c
t.
ation
g
es
or the NA.
e NA mappin
g
g
table.
Andere Handbücher für NA-series
9
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Omron Touch-Terminal Handbücher
Omron
Omron DeviceNet DRT2-AD04 Bedienungsanleitung
Omron
Omron NB3Q-TW**B series Gebrauchsanweisung
Omron
Omron NS10-TV Series Benutzerhandbuch
Omron
Omron NT21 Benutzerhandbuch
Omron
Omron NT20 Bedienungsanleitung
Omron
Omron DRT2 SERIES DEVICENET SLAVES - OPERATION ... Bedienungsanleitung
Omron
Omron NT30 Bedienungsanleitung
Omron
Omron NT11 - 01-2004 Bedienungsanleitung
Omron
Omron NT600M Series Bedienungsanleitung
Omron
Omron 8025G Bedienungsanleitung
Omron
Omron NB3Q-TW**B series Installations- und Betriebshandbuch
Omron
Omron NSH5 Bedienungsanleitung
Omron
Omron NT2S-SF121B-E - Bedienungsanleitung
Omron
Omron NA-series Gebrauchsanweisung
Omron
Omron NT4S Bedienungsanleitung
Omron
Omron NV3W Series Gebrauchsanweisung
Omron
Omron NT31 Series Installationshandbuch
Omron
Omron NSJ5 Bedienungsanleitung
Omron
Omron Programmable Terminals NT31 NT31C Benutzerhandbuch
Omron
Omron WT30 Bedienungsanleitung
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung