Omron NA-series Gebrauchsanweisung

Programmable Terminal NA Series

Practice Guide

IAG Collection for

EtherNet/IP™Monitor

NA5-15

□

101

□

NA5-12□101□

V454-E1-01

■ Introduction

This guide describes reference information to create and use IAG objects. It does not provide safety

information.

Be sure to obtain the manuals for NA Series Programmable Terminal, read and understand the

safety points and other information required for use, and test sufficiently before actual use of the

equipment.

Terms and Conditions Agreements

Thank you for your usage of products of Omron Corporation (“Omron”). Without any special

agreements, these terms and conditions shall apply to all transactions regardless of who

sells.

Definitions of Terms

Omron product(s): Omron’s factory automation system devices, general control devices,

sensing devices, and electronic/mechanical components.

- Catalogues: Any and all catalogues (including “Best Components” and other catalogues),

specifications, instructions and manuals relating to Omron products, including

electronically provided data.

- Conditions: Use conditions, rating, performance, operating environment, handling

procedure, precautions and/or prohibited use of Omron products described in the

catalogues.

- User application(s): Application of Omron products by a customer, including but not

limited to embedding/using Omron products into customer’s components, electronic circuit

boards, devices, equipment or systems.

- Conformity: (a) conformity, (b)performance, (c) no infringement of intellectual property of

third party, (d) compliance with laws and regulations, and (e) conformity to various

standards of Omron products in user applications.

Note about Descriptions

Rating and performance is tested separately. Combined conditions are not warranted.

- Reference data is intended to be used just for reference. Omron does NOT guarantee that

the Omron Product can work properly in the range of reference data.

- Examples are intended for reference. Omron does not warrant the conformity in usage of

the examples.

- Omron may discontinue Omron products or change specifications of them because of

improvements or other reasons.

Note about Use

Adopt and use Omron products considering the following cautions.

- Use the product in conformance to the conditions, including rating and performance.

- Check the conformity and decide whether or not Omron products are able to be adopted.

Omron makes no guarantees about the conformity.

- Make sure in advance that electricity is properly supplied to Omron products and they are

set up rightly in your system for intended use.

- When you use Omron products, ensure the followings: (i) allowance in aspect of rating

and performance, (ii) safety design which can minimize danger of the application when the

product does not work properly, (iii) systematic safety measures to notify danger to users,

and (ⅳ) periodical maintenance of Omron products and the user application.

- Omron assumes no responsibility for any direct or indirect loss, damage and expense

resulting from infection of our products, installed software, any computer devices,

computer programs, network, and databases with the followings:

- DDoS attack (distributed DoS attack),

- Computer virus and other technically harmful program, and

- Unauthorized access.

Please conduct the followings by yourself: (i) antivirus software, (ii) data input/output, (iii)

lost data recovery, (ⅳ) protections against computer virus that contaminate Omron

products or the installed software, and (ⅴ) measures to protect Omron products from

unauthorized access.

- Omron products are designed and manufactured as commodity for general industrial

products. For this reason, the usages (a) to (d) are to be unintended. Omron makes no

guarantees on Omron products, if you use Omron products for those purposes.

However, special applications that Omron expects or usages with especial agreement are

excluded.

(a) Applications requiring high-level safety (e.g. nuclear control facilities, combustion

facilities, aerospace and aviation facilities, railroad facilities, elevating facilities,

amusement facilities, medical facilities, safety devices or other applications which has

possibility to influence lives or bodies)

(b) Applications requiring high reliability (e.g. gas/water/electricity supply system, 24-hour

operating system, applications handling with rights/property, such as payment system)

potential of chemical contamination or electromagnetic interference, facilities with vibration

or impact, facilities on continual operation for a long period).

(d) Applications under conditions or environment which are not described in the

catalogues

- Omron products in the catalogues are not intended to be used in automotive applications

(including two-wheel vehicles). Please DO NOT use Omron products in automotive

applications. Contact our sales personnel for automotive products.

Warranty

Warranty of Omron products is subject to followings.

-Warranty Period: One year after your purchase. However, except when there is a

separate statement in the catalogues.

-Coverage: Omron will provide one of the services listed below, on the basis of

Omron’s decision.

(a) Free repairing of the malfunctioning Omron products (except electronic/mechanical

components) at Omron maintenance service sites.

(b) Free replacement of the malfunctioning Omron products with the same number of

substitutes.

-Exceptions: This warranty does not cover malfunctions caused by any of the

followings.

(a) Usage in the manner other than its original purpose

(b) Usage out of the conditions

(d) Remodeling/repairing by anyone except Omron

(e) Software program by anyone except Omron

(f) Causes which could not be foreseen by the level of science and technology at the

time of shipment of the products.

(g) Causes outside Omron or Omron products, including force majeure such as disasters

Limitation of Liability

The warranty described in this Terms and Conditions Agreements is a whole and sole

liability for Omron products. There are no other warranties, expressed or implied. Omron

and its distributors are not liable for any damages arisen from or relating to Omron

products.

Export Control

Customers of Omron products shall comply with all applicable laws and regulations of

other relevant countries regarding security export control, in exporting Omron products

and/or technical documents or in providing such products and/or documents to a non-

resident.

Omron products and/or technical documents may not be provided to customers if they

violate the laws and regulations.

Table of Contents

Terms and Conditions Agreements ........................................................3

Table of Contents .....................................................................................6

1Related Manuals ...............................................................................7

2Precautions.......................................................................................8

3Overview............................................................................................9

3-1 Overview.........................................................................................9

3-2 System Configuration ...................................................................10

4Library Versions .............................................................................11

5IAG Descriptions.............................................................................12

5-1 EtherNet/IP NetworkMonitor.........................................................12

5-2 DLR Monitor..................................................................................21

Revision History .....................................................................................30

1Related Manuals

No.

Model

Title

V117

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

Programmable Terminal NA Series Hardware

USER’S MANUAL

V118

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

Programmable Terminal NA Series Software

USER’S MANUAL

V119

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

Programmable Terminal NA Series Device

Connection USER'S MANUAL

V120

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

Programmable Terminal NA Series STARTUP

GUIDE

W504

SYSMAC-SE2□□□

Sysmac Studio Version 1 OPERATION MANUAL

2Precautions

(1)When building an actual system, check the specifications of the component devices of

the system, use within the ratings and specified performance, and implement safety

measures such as safety circuits to minimize the possibility of an accident.

(2)For safe use of the system, obtain the manuals of the component devices of the system

and check the information in each manual, including safety precautions, precautions for

safe use.

(3)It is customer’s responsibility to check all laws, regulations, and standards that the

system must comply with.

system, or transmitted, in any form, or by any means, mechanical, electronic,

photocopying, recording, or otherwise, without the prior written permission of OMRON.

(5)The information in this guide is current as of February 2020. It is subject to change

without notice because of product’s update.

(6)This IAG library has been tested with the system configuration in 3-2 “System

Configuration.” However, Omron does not guarantee screen operations after embedding

the IAGs.

Special information in this document is classified as follows:

Precautions for Safe Use

Describes precautions on what to do and what not to do to ensure proper operation

and performance.

Precautions for Correct Use

Describes precautions on what to do and what not to do to ensure proper operation

and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Copyrights and Trademarks

Sysmac® is the trademark or registered trademark of Omron Corporation in

Japan and other countries for Omron factory automation products.

Screenshots are used in accordance with Microsoft Corporation guidelines.

Windows and Visual Basic are registered trademarks of Microsoft Corporation

in the United States and other countries.

EtherCAT® is a registered trademark and patented technology, licensed by

Beckhoff Automation GmbH, Germany.

EtherNet/IP™ and CIP Safety™ are trademarks of ODVA, Inc.

Company names and product names in this document are the trademarks or

registered trademarks of their respective companies.

3Overview

3-1 Overview

This document describes IAG collections that directly read the information about the

EtherNet/IP network or devices connected with the NA Series HMI.

•IAG external specifications

•IAG installation on a screen

IAG

Icon

Description

EtherNet_IP_NetworkMonitor

Monitor for an EtherNet/IP device on a

network together with NA

DLR_Monitor

DLR monitor for DLR Super Visor

These IAGs are included in the IAG collection file below.

File name

Description

EtherNetIPMonitor_IAG_12inch_RevA.iag

For “RevA”, the underlined letter stands for version.

Ask an Omron sales representative for the file.

3-2 System Configuration

The IAG objects were tested with the system configuration and versions below.

PC (Sysmac Studio)

Sysmac Studio projects with IAGs

Screen Transfer

NA Series

NX7

Series

NX-CSG320

■Ring Node

1783-ETAP, Rockwell

Automation

GI-S

Series

EtherNet/IP

NX102

Series

DLR

supporting

device

CIP Safety on EtherNet/IP devices

■Controller

■Ring Super Visor

DLR

R-SV

■Ring Node

DLR

R-N

NXR-ILM

Series

Andere Handbücher für NA-series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Touch-Terminal Handbücher

Omron

Omron NT11 - 01-2004 Bedienungsanleitung

Omron

Omron NT3S Bedienungsanleitung

Omron

Omron Programmable Terminals NT631 Installationshandbuch

Omron

Omron NT21 Benutzerhandbuch

Omron

Omron NT600M Series Bedienungsanleitung

Omron

Omron NS10-TV Series Betriebsanleitung

Omron

Omron NB3Q-TW**B series Gebrauchsanweisung

Omron

Omron NA5-15W101S-V1 Bedienungsanleitung

Omron

Omron NT11 - 01-2004 Bedienungsanleitung

Omron

Omron NS - REV 12 Benutzerhandbuch

Omron

Omron NSH5 Bedienungsanleitung

Omron

Omron Programmable Terminals NT631 Benutzerhandbuch

Omron

Omron NS12 Gebrauchsanweisung

Omron

Omron NT20S-ST121B-EV3 Bedienungsanleitung

Omron

Omron NT620C Bedienungsanleitung

Omron

Omron B7A Bedienungsanleitung

Omron

Omron NSJ5 Bedienungsanleitung

Omron

Omron NS - HOST Gebrauchsanweisung

Omron

Omron NT31 Series Benutzerhandbuch

Omron

Omron GX-ID1611 Bedienungsanleitung

Omron

Omron NXR-ILM08C-EIT Bedienungsanleitung

Omron

Omron NXR-ILM08C-ECT Bedienungsanleitung

Omron

Omron NTXS Bedienungsanleitung

Omron

Omron NS10-TV Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung