Omron NB3Q-TW**B series Installations- und Betriebshandbuch

At the end of this document you will find links to products related to this catalog. You can go directly to our shop by

clicking HERE. HERE

ZX-T Series

Cat. No. V109-E2-04

Programmable Terminals

STARTUP GUIDE MANUAL

Cat. No. V109-E2-04 Note: Specif cations subject to change without notice.

Authorized Distributor:

Printed in Europe

Cat. No. V109-E2-04 Programmable Terminals NB-series STARTUP GUIDE MANUAL

NB-series

NB3Q-TW_B

NB5Q-TW_B

NB7W-TW_B

NB10W-TW01B

OMRON, 2012

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-

stantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

NB-series

NB3Q-TWB

NB5Q-TWB

NB7W-TWB

NB10W-TW01B

Programmable Terminals

Startup Guide Manual

Revised August 2012

NB-series Programmable Terminals Startup Guide Manual(V109)

Introduction

Thank you for purchasing an NB-series Programmable Terminal.

NB-Series Programmable Terminals (PTs) are designed to handle information generated in FA production

sites. Be sure to understand the functions and performances etc thoroughly before using PT correctly.

This manual is intended for the following personnel, who must also have knowledge of electrical

systems (an electrical engineer or the equivalent).

•Personnel in charge of introducing FA systems into production facilities.

•Personnel in charge of designing FA systems.

•Personnel in charge of installing and connecting FA facilities.

•Personnel in charge of managing FA systems and facilities

•The user must operate the product according to the performance specifications described in the

operation manuals.

•Do not use the PT touch switch input functions for applications where danger to human life or serious

property damage is possible, or for emergency switch applications.

•Before using the product under conditions which are not described in the manual or applying the

product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion

systems, medical equipment, amusement machines, safety equipment, and other systems,

machines and equipment that may have a serious influence on lives and property if used improperly,

consult your OMRON representative.

•Make sure that the ratings and performance characteristics of the product are sufficient for the

systems, machines, and equipment, and be sure to provide the systems, machines, and equipment

with double safety mechanisms.

•This manual provides information for connecting and setting up an NB-Series PT. Be sure to read

this manual before attempting to use the PT and keep this manual close at hand for reference during

installation and operation.

Intended Audience

General Precautions

2NB-series Programmable Terminals Startup Guide Manual(V109)

NB-series Manuals

NB-series manuals are organized in the sections listed in the following tables. Refer to the appropriate

section in the manuals as required.

Programmable Terminals Startup Guide Manual (Cat. No. V109)

(This manual)

Section Contents

Section 1 NB Overview This section provide specifications of the NB Unit, describes its names

and functions of the various parts.

Section 2 System Design This section describes the manual structure, takes NB7W as an

example to introduce the operation procedures of the NB system.

Section 3 Installation and Wiring This section describes how to install and wire the NB Unit.

Section 4 Screen Creation This section describes how to create a demonstration project through

NB-Designer.

Section 5 Run This section describes how to start running at the Host side and

prepare to send screen data to NB7W.

Section 6 Maintenance and

Troubleshooting

This section describes the maintenance and inspection methods for

preventing errors occurring, and troubleshooting measures when errors

occur.

Programmable Terminals NB-Designer Operation Manual

(Cat. No. V106)

Section Contents

Section 1 Introduction This section provides an outline of the NB-series PTs, including their

functions, features, connection types and communication methods.

Section 2 Installation and Startup of

NB-Designer

This section describes how to install and start the NB-Designer.

Section 3 Functions of NB-Designer This section describes the functions of NB-Designer.

Section 4 Functions of NBManager This section describes the functions of NBManager.

Section 5 Maintenance and

Abnormality Handling

This section describes the maintenance and check to prevent the

abnormality occurrence and the handling of the abnormalities occurred

in NB Unit.

Section 6 Descriptions of New

Functions Added into NB-

TW01B

This section describes the new functions added into NB-TW01B,

the system attributes and the component attributes.

Appendices The appendices provide lists of the NB Units, the Communication Units,

the applicable PLCs, and the list of NB-Designer functions.

NB-series Programmable Terminals Startup Guide Manual(V109)

Programmable Terminals Setup Manual (Cat. No. V107)

Section Contents

Section 1 Part Names and Functions This section describes the names and functions of the various parts of

an NB Unit.

Section 2 Installing the NB Unit and

Connecting Peripheral Devices

This section describes the methods used to install the NB Unit and

connect peripheral devices.

Section 3 System Setting Mode This section describes the System Setting Mode.

Section 4 Calibrate Mode This section describes the Calibrate Mode.

Appendices The appendices provide information on specifications, dimensions,

wirings, and lists of the NB Units, the applicable PLCs and options.

Programmable Terminals Host Connection Manual (Cat. No. V108)

Section Contents

Section 1 List for All PLCs

Supported by NB series

This section lists all PLCs supported by NB Units.

Section 2 Connecting to SIEMENS

PLCs

This section describes the connection to SIEMENS PLCs.

Section 3 Connecting to Mitsubishi

PLCs

This section describes the connection to Mitsubishi PLCs.

Section 4 Connecting to Schneider

PLCs

This section describes the connection to Schneider PLCs.

Section 5 Modbus Connection This section describes the connection on Modbus protocol.

Section 6 Connecting to Delta PLCs This section describes the connection to Delta PLCs.

Section 7 Connecting to LG PLCs This section describes the connection to LG PLCs.

Section 8 Connecting to Panasonic

PLCs

This section describes the connection to Panasonic PLCs.

Section 9 Connecting to Allen-

Bradley (Rockwell) PLC

This section describes the connection to Allen-Bradley PLC.

Section 10 Connecting to PLC of GE

Fanuc Automation Inc.

This section describes the connection to PLC of GE Fanuc Automation

Inc.

WARNING

Failure to read and understand the information

provided in this manual may result in personal injury

or death, damage to the product, or product failure.

Please read each section in its entirety and be sure

you understand the information provided in the

section and related sections before attempting any

of the procedures or operations given.

4NB-series Programmable Terminals Startup Guide Manual(V109)

Manual Structure

The following page structure and icons are used in this manual.

Special information in this manual is classified as follows:

Page Structure and Icons

Special Information

2-3

2 Installing the NB Unit and Connecting Peripheral Devices

NB-series Programmable Terminals Setup Manual(V107)

2-1 Installing the NB Unit

2-1-2 Installation onto the Operation Panel

Install the NB Unit by embedding it into the operation panel.

Use the metal kit and tool (a crosshead screwdriver) supplied with the Unit for installation.

Proceed the installation following the procedures below.

Panel cutout with dimensions is shown below. Fit the NB Unit into the panel from the front side.

As follows, insert panel fixators at the locations indicated by red box around the back of the NB Unit.

Insert the hooks of positioners into the square holes on the Unit to hold the fixators properly, and

tighten the screws firmly with the screwdriver.

NB5Q/NB7W-TWB

Precautions for Safe Use

•When operating on the operation panel, make sure to keep metal particles from entering the

Unit.

The mounting panel must be between 1.6 and 4.8 mm thick. The NB Unit must be installed

in a control panel.

For the sake of waterproof and dustproof, all the fixators must be evenly tightened to a

torque of 0.5~0.6 Nm. If the tightening torque exceeds the specified value, or the tightening

is not even, deformation of the front panel may occur.

Make sure that the operation panel is clean, unbent, and strong enough for the installation

process.

2-1-2 Installation onto the Operation Panel

Models Opening Dimension (W H mm)

NB3Q-TW00B/TW01B 119.0(+0.5/-0) 93.0(+0.5/-0)

NB5Q-TW00B/TW01B 172.4(+0.5/-0) 131.0(+0.5/-0)

NB7W-TW00B/TW01B 191.0(+0.5/-0) 137.0(+0.5/-0)

NB10W-TW01B 258.0(+0.5/-0) 200.0(+0.5/-0)

Opening dimensions

Width

Height

Level 1 heading

Level 2 heading

Level 3 heading

Step in a procedure

Manual name

Special Information

(See below.)

Level 3 heading

Page tab

Gives the current

headings.

Indicates a step in a

procedure.

Gives the number

of the section.

This illustration is provided only as a sample and may not literally appear in this manual.

Icons are used to indicate

precautions and

additional information.

Precautions for Safe Use

Precautions on what to do and what not to do to ensure using the product safely.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to increase understanding or make operation easier.

NB-series Programmable Terminals Startup Guide Manual(V109)

Terminology

The following terminology is used in this manual.

Terms Descriptions

NB Unit Indicates the main Unit of the products in the OMRON NB Series of Programmable

Te r mi na l.

NB Series Indicates products in the OMRON NB Series of Programmable Terminal.

In this manual, unless otherwise specified, NB Series is taken as the subject

concerned.

PLC Indicates a Programmable Controller.

CP Series Indicates the following products in the OMRON CP Series of Programmable Controllers:

CP1H, CP1L, CP1E

CS/CJ Series Indicates the following products in the OMRON CS/CJ Series of Programmable

Controllers: CS1G, CS1H, CS1G-H, CS1H-H, CJ1G, CJ1M, CJ2M, CJ2H

C Series Indicates the following products in the OMRON C Series of Programmable Controllers:

C200HX(-Z), C200HG(-Z), C200HE(-Z), CQM1, CQM1H, CPM1A, CPM2A, CPM2C

Serial Communication

Unit

Indicates a Serial Communication Unit for an OMRON SYSMAC CS/CJ-Series PLC.

Serial Communication

Board

Indicates a Serial Communication Board for an OMRON SYSMAC CS/CJ-Series PLC.

Communication Board Indicates a Communication Board for an OMRON C200HX/HG/HE(-Z) PLC.

CPU Unit Indicates a CPU Unit in the OMRON CP, CS/CJ or SYSMAC C Series of Programmable

Controllers.

NB-Designer Indicates the OMRON NB-Designer.

Host Indicates the PLC and other units functioning as the control devices for NB-Series

Units.

PT Indicates an OMRON Programmable Terminal.

HMI Indicates an OMRON Programmable Terminal.

Andere Handbücher für NB3Q-TW**B series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Touch-Terminal Handbücher

Omron

Omron NB-series Gebrauchsanweisung

Omron

Omron NS - REV 12 Benutzerhandbuch

Omron

Omron NT11S Bedienungsanleitung

Omron

Omron NT31 Series Benutzerhandbuch

Omron

Omron NS - Betriebsanleitung

Omron

Omron NA-series Bedienungsanleitung

Omron

Omron NT2S-SF122B-E START V1.03 Gebrauchsanweisung

Omron

Omron NA-series Benutzerhandbuch

Omron

Omron NA5-15*101 series Benutzerhandbuch

Omron

Omron NS - HOST Gebrauchsanweisung

Omron

Omron NS8-TV0-V2 Benutzerhandbuch

Omron

Omron NV3Q Series Gebrauchsanweisung

Omron

Omron NSH5 Bedienungsanleitung

Omron

Omron NA-series Gebrauchsanweisung

Omron

Omron NB-series Bedienungsanleitung

Omron

Omron NT20M series Bedienungsanleitung

Omron

Omron NT20S Bedienungsanleitung

Omron

Omron NT31 Series Benutzerhandbuch

Omron

Omron NT20 Bedienungsanleitung

Omron

Omron NA-series Gebrauchsanweisung

Omron

Omron PRT1-COM Bedienungsanleitung

Omron

Omron NXR-ILM08C-EIT Bedienungsanleitung

Omron

Omron DRT2 SERIES DEVICENET SLAVES - OPERATION ... Bedienungsanleitung

Omron

Omron NA5-15W101S-V1 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung