One Forall Essence 6 Device Bedienungsanleitung

Essence 6 Device

Universal Remote

Control URC2160

ENGLISH 2

FRANÇAIS 11

CODE LIST 20

2x AAA

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 1713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 101-12-2022 16:2101-12-2022 16:21

Thank you for purchasing the One For All Essence Universal

Remote Control. The remote can be used to control up to 6

Audio Video Devices such as a TV, Set Top Box, Streaming

device, Blu-ray player, DVD player/recorder, audio system,

soundbar.

This manual will help you to set up the Essence to control

all of your devices and take advantage of its features.

Your remote requires 2 x AAA / LR03 batteries (not Included).

Please insert them as shown below. Alkaline batteries are

recommended.

INTRODUCTION

BATTERIES

CAUTION: Risk of explosion if battery is

replaced by an incorrect type.

Use quality Alkaline batteries.

2x AAA

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 2713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 201-12-2022 16:2101-12-2022 16:21

KEY DESCRIPTIONS

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 3713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 301-12-2022 16:2101-12-2022 16:21

1Power Switches your devices on and o

2Setup This key is used to set up the Essence remote

3Input Used to select Input on devices

4Device keys These keys are used to select which device

the Essence currently controls. After pressing

the TV key, the remote will control your TV.

To switch to controlling another device,

simply press the appropriate key. The devices

that can be programmed to each key are as

follows:

TV: All televisions such as LED, LCD , Plasma,

OLED etc.

STREAM: Streaming devices such as an Apple

TV, Roku Box etc. Also works Xbox 360 and

Xbox One.

STB:

Set Top Boxes, including Satellite, Cable

and DTV.

AUD: Audio devices including Sound Bars, AV

Receivers and Hi-Fi

BLURAY: Blu-ray Players and DVD Players /

Recorders

DVD: DVD Players / Recorders and Blu-ray

Players

5Playback Keys Control the playback of movies, music and TV

6Live Return to live TV from Timeshift or recording

7List Show list of recordings

8Replay Replay last 30 seconds

9Guide TV Guide

10 Info Displays information about the current shows

or channel

11 Menu

Access the installation menu of the current device

12 Menu Directions and OK

Control the menu of the current device

13 Back Back one step in the Menu

14 Exit Exits the menu

15 Home Displays the Home Menu

16 Channel Up & Down

Change channels on the current device.

17 Last Channel Changes to the last channel viewed.

18 Volume Up and Down

Control the volume of the current device. You

can also set up these keys to always control

one device. For details see the Volume Lock

feature.

19 Mute Mutes the volume of the current device. You

can also set up this key to always control

one device. For details see the Volume Lock

feature.

20 RGYB keys

Quick access buttons for the menu of the current

device.

21 App Shortcut Key

Key for starting streaming apps. See the

App Shortcut Key section for details.

22 Digits Select channels on the current device. On

Audio devices, these keys will select individual

inputs.

23 Delimiter “Dash” key

Selects sub channels such as local news and

extra functions in the Menu mode of your Set

Top Box

24 Channel Enter On some devices press this key after using the

digit keys to enter your channel number.

KEY DESCRIPTIONS

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 4713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 401-12-2022 16:2101-12-2022 16:21

The Essence remote is pre-programmed to control some of

the most popular devices out of the box. If you have one of

the following devices try the putting the batteries in and

pressing the device key, and then press a few keys to see if

the remote works your device:

Device Key To Press Device controlled

TV Samsung TV

STREAM Roku Streaming Box

STB Comcast Set top box

AUDIO Yamaha Receiver

BLURAY Samsung Blu-ray Player

DVD Sony DVD Player

If your device is not one of those listed above, or you have

extra devices to set up, there are 3 ways to do this. The

easiest is SimpleSet which is used for the common brands

and devices.

If the brand of your device is shown in the SimpleSet list next

to a digit key, you can use the SimpleSet system described in

this section, please locate the brand of your device and note

the key associated with it.

Onn, Insignia

Philips, Magnavox

Roku, Element

Samsung, Panasonic

Sharp, Hisense

Sony, Sanyo

TCL, RCA

Toshiba, Westinghouse

VIZIO

STREAM

AirTV, Sling TV

Apple

Microsoft

Netgear

NVIDIA

Onn

Roku

Sony

Western Digital

Xiaomi

STB

Bell

Rogers

Shaw

SETUP

SIMPLESET

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 5713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 501-12-2022 16:2101-12-2022 16:21

AUDIO

Bose

Denon

JBL, Polk Audio

Onn

Onkyo

Samsung

Sony

Yamaha

VIZIO, Sonos

DVD and BLURAY

LG, Sharp

Onn, Insignia

Panasonic

Philips, Magnavox

Pioneer

Samsung

Sony

Toshiba

VIZIO, RCA

Yamaha

SETUP

SIMPLESET

To set up your device:

1. Turn on your device (not on standby) and point the

Essence remote towards it. If you are setting up a

Streaming device, make sure a movie or TV show is

playing.

2. Press the Device key you wish to set up

(for example TV).

3. Hold down the SETUP key until the LED

under the Device key blinks twice

4. Hold down the digit key for your brand

and device as listed in the tables above -

e.g. 3 for a Philips TV.

5. The remote will send a Power command every 3

seconds, but if your device does not have a Power

function (for example a streaming box like Apple TV)

the remote will send the Play/Pause function.

6. As soon as your device reacts by turning o or

Pausing (Streaming box only) release the digit.

7. The LED will blink twice and the remote should

now operate your device.

• If you nd one or more keys do not work as you expect, start

again at step 2 – the remote will start with the next code in

the memory.

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 6713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 601-12-2022 16:2101-12-2022 16:21

SETUP

SETUP BY CODE

If the brand of your device is not listed in the SimpleSet

feature, you can set up by trying codes individually. To do

this, rstly locate your brand in the Code List. Codes are listed

by brand and device, and in order of popularity.

1. Turn on your device (not on standby) and point the

Essence remote towards it.

2. Press the Device key you wish to set up

(for example TV)

3. Hold down the SETUP key until the LED

under the Device key blinks twice

4. Enter the rst 4 digit code listed for your

brand (e.g. 1840 for LG).

5. The LED will blink twice on the last digit of the code.

6. Now aim the remote towards your device

and press the POWER key.*

7. If the device turns o your remote is ready to use. If

not, repeat steps 2-6 with the next code in the list.

* Note: If your original remote did not have a Power key,

try testing with a dierent key at step 6. For example try

pressing Play or Pause when setting up a streaming box and

see if the box responds.

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 7713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 701-12-2022 16:2101-12-2022 16:21

SETUP

LEARNING

Your Essence remote control can learn any function from

any other working remote control. This is a quick and easy

one-time setup that allows you to control any infrared

controlled device you have in your living room. It also allows

you to add a key or keys that may be missing to a spare key

on the Essence.

To do this, rstly make sure you have all your original remote

controls to hand, and that they have working batteries in.

To learn functions, the original remote should be approxima-

tely 2-5 cm from the Essence remote, pointing towards it:

1. Press the Device key for the device you

want to learn functions onto (e.g. TV).

2. Hold down the SETUP key until the LED

under the Device key blinks twice.

3. Press 975 – the LED should blink twice.

4. Press and release the key you want to

learn a function onto (for example the

POWER key) – the LED will begin to ash

rapidly.

5. Press and release* the corresponding

key on the original remote, for example

POWER.

6. The LED will blink twice to indicate the key has been

learned correctly.

7. Repeat steps 4 and 5 for each key you want to learn –

remember you can learn from multiple remotes, but

only one function per key.

8. When you have learned all the functions

you require, press and hold the SETUP

key until the LED blinks twice.

* Some remotes send commands dierently. If you nd a

function cannot be learned, try holding down the key on

the original remote instead of pressing and releasing.

Hints:

• If the LED shows one long blink at step 5, the function was

not learned correctly, please try again from step 4.

• If you nd one or more keys don’t work properly after set

up, you can re-enter the learning mode at any time by

repeating the procedure from step 1.

• If one or more of your original remotes aren’t working, you

can still set up the Essence remote by SimpleSet or Code

Set Up.

2 - 5 CM

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 8713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 801-12-2022 16:2101-12-2022 16:21

SETUP

VOLUME LOCK

If you primarily use one device for controlling sound, for

example a Sound Bar or Audio Video Receiver, it’s possible

to program your Essence remote to only control that device

when you use the Volume Up, Down and Mute keys. To do

this:

1. Hold down the SETUP key until the LED

under the Device key blinks twice.

2. Press 993 – the LED should blink twice.

3. Press the device key for the device to

always control volume – for example

Audio.

4. The LED will blink twice.

From now on, pressing the Volume Up, Down or Mute keys

will always control the the above programmed device, no

matter what device you are controlling.

To unlock the volume, and return the remote to controlling

each device’s sound individually, the procedure is:

1. Hold down the SETUP key until the LED

under the Device key blinks twice

2. Press 993 – the LED should blink twice

3. Press VOLUME DOWN – the LED will blink

four times and Volume is now unlocked.

Deleting a learned function

If you want to delete a learned function and return that key

to its original state, you can use the following procedure:

1. Press the Device key for the device your learned

function operates

2. Hold down the SETUP key until the LED

under the Device key blinks twice

3. Press 976 – the LED should blink twice

4. Press the key you want to reset twice – the LED

should blink twice and the learned function has been

deleted.

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 9713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 901-12-2022 16:2101-12-2022 16:21

APP SHORTCUT KEY

The Essence remote features an App Shortcut Key which can

be used to open app on your Smart Devices. If your original

remote control has a Netix key, this key will perform the

same function.

However if you did not have a key like this, but still had the

ability to watch a streaming service, you can use this key as

a shortcut by programming a macro on it. Most AV devices

which are connected to the internet, such as Smart TVs or

streaming Set Top Boxes have one or more applications they

can run to access TV viewing via the internet. Examples of

these would be Netix, YouTube, Amazon Prime or similar.

To program the macro, you rst need to know the device you

use to access the service, and then the sequence of keys you

need to press to always bring up the service you prefer, For

example, some Panasonic TVs will start Netix by pressing the

Apps key, then Menu Down Twice, and nally the OK key.

Or on an Apple TV, the sequence is Menu, Menu Down and

OK.

Once you have determined the sequence for your device,

follow these steps:

1. Sit in front of your device with it switched on (not on

standby)

2. Hold down the App Shortcut key until the

LED blinks twice.

3. Press the device key for the device you

want to use for the macro (e.g. Stream)

4. Now perform the sequence of keys exactly as you

would normally to start your streaming service The

remote will operate your device and the macro is

recorded in real time - so if it normally takes a few

seconds for your device to react don’t worry.

5. Once you have nished the sequence -

and the Streaming Service has started on

your device - hold down the App Shortcut

key until the LED blinks twice and goes

out. The macro is now stored.

Tips

• Make sure the Essence remote is operating the device in

question before programming

• If you nd the Macro doesn’t work as expected, you can just

repeat the same sequence to reprogram

• When programming, wait for your device to respond rst,

the remote will remember the timing

• The App Shortcut macro is tied to one device, remember to

make sure you are watching the correct device

Connect with us on Facebook.

Rejoignez-nous sur Facebook.

facebook.com/oneforallworldwide

Connect with us on Instagram.

Rejoignez-nous sur Instagram.

@oneforall.worldwide

Connect with us on LinkedIn.

Rejoignez-nous sur LinkedIn.

linkedin.com/company/one-for-all-worldwide

Visit our YouTube channel.

Visitez notre chaîne youtube.

youtube.com/user/oneforallproducts

Connect with us on Facebook.

Rejoignez-nous sur Facebook.

facebook.com/oneforallworldwide

Connect with us on Instagram.

Rejoignez-nous sur Instagram.

@oneforall.worldwide

Connect with us on LinkedIn.

Rejoignez-nous sur LinkedIn.

linkedin.com/company/one-for-all-worldwide

Visit our YouTube channel.

Visitez notre chaîne youtube.

youtube.com/user/oneforallproducts

713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 10713372 Essence-6 CAN_Manual URC2160 RDN1011222 incl. Codelist_75x250.indd 1001-12-2022 16:2101-12-2022 16:21

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere One Forall Fernbedienung Handbücher

One Forall

One Forall OARN03S Bedienungsanleitung

One Forall

One Forall URC-6440 Administratorhandbuch

One Forall

One Forall URC-4640w Bedienungsanleitung

One Forall

One Forall CURC4110 Bedienungsanleitung

One Forall

One Forall URC-6820 Bedienungsanleitung

One Forall

One Forall URC-2981 Bedienungsanleitung

One Forall

One Forall URC-5600 Cinema 5 Bedienungsanleitung

One Forall

One Forall URC-4640w Bedienungsanleitung

One Forall

One Forall Essence 4 Bedienungsanleitung

One Forall

One Forall 6-DEVICE PVR Bedienungsanleitung

One Forall

One Forall URC-8820 B00 Bedienungsanleitung

One Forall

One Forall URC 7145 Bedienungsanleitung

One Forall

One Forall URC1030 Stücklistenhandbuch

One Forall

One Forall URC-6420 Administratorhandbuch

One Forall

One Forall URC-6820 Bedienungsanleitung

One Forall

One Forall URC-3605 Bedienungsanleitung

One Forall

One Forall Kameleon Bedienungsanleitung

One Forall

One Forall SAMSUNG URC-1310 Bedienungsanleitung

One Forall

One Forall URC 7115 Bedienungsanleitung

One Forall

One Forall URC-5800 Cinema 5+ Bedienungsanleitung

One Forall

One Forall OARN08G Bedienungsanleitung

One Forall

One Forall URC-6131 Bedienungsanleitung

One Forall

One Forall Easy 2 Bedienungsanleitung

One Forall

One Forall URC 1911 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung