One Forall Easy 2 Bedienungsanleitung

URC-7720

702722

Universal remote

Universal Fernbedienung

Télécommande universelle

Mando a Distancia Universal

Telecomando Universal

Telecomando Universale

Universele Afstandsbediening

Instructions manual . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 2

ONE FOR ALL 2

English

Deutsch

Français

Español

Português

Italiano

Nederlands

URC-7720

WWW.ONEFORALL.COM 3

15/16

INSTALLATION

2WWW.ONEFORALL.COM

PICTURES OF THE ONE FOR ALL 2 REMOTE

. . . . . . . . . . . . . . 3

BATTERIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

THE KEYPAD

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SETTING UP THE ONE FOR ALL 2 . . . . . . . . .Page 6

(How to set up the ONE FOR ALL 2 to control your devices)

• Direct code set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

• Search Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SET UP CODES

Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Video Recorders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

CODE BLINK OUT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

(To find out which code is currently programmed)

QUICK CODE REFERENCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

EXTRA FEATURES

Mode re-assignment (Changing a device mode) . . . . . . . . . . . . 9

Colour and Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Volume Punch Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

TROUBLE-SHOOTING

Problem & Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Table of Contents

Congratulations on your purchase of the ONE FOR ALL 2 Universal

Remote Control. By choosing the ONE FOR ALL 2 remote you have opted

for the User Friendly remote control solution. Made according to the

highest quality, the ONE FOR ALL 2 will provide you with long-term

satisfaction. Please read these enclosed instructions carefully before

putting your ONE FOR ALL 2 to use.

Your ONE FOR ALL 2 Remote Package contains:

• Your ONE FOR ALL 2 Remote

• Your ONE FOR ALL 2 Manual

Your Manual is divided into two parts: the set-up instructions and the

device codes.

PLEASE DO NOT DISCARD THIS MANUAL AS YOU MAY NEED IT

AGAIN IN THE FUTURE!

Your ONE FOR ALL 2 can operate two devices: a Television and a Video

Recorder.

About Your ONE FOR ALL 2

English

Batteries

Your ONE FOR ALL 2 Remote needs 2 new "AA/LR6" Alkaline batteries.

1Push the battery door upwards and lift it up to remove it.

2. Match the batteries to the (+) and (–) marks inside the battery case,

then insert the batteries.

3. Replace the battery cover by pushing downwards and allowing

it to click back into position.

Please refer to the picture of the ONE FOR ALL 2 Remote Control on

Page 3.

1 Magic Key:

The Magic key is used to set-up your ONE FOR ALL 2 Remote Control

and to access special functions.

2 LED:

During the use of your ONE FOR ALL 2, the LED will light up red.

3 Power Key:

The Power key controls the same function as it did on your original

remote.

4Device Keys:

The TV & VCR keys select the home entertainment device you wish

to control. For example, pressing the TV key allows the remote to

control the functions of your television, etc.

5 Number Keys:

The Number keys (0-9, -/--(10)) provide the functions just like your

original remote, such as the direct access to program/channel

selection. If your original remote uses a 10 key, this function can be

found by pressing the -/-- key.

6 AV

The AV key operates the same function it did on your original

remote control.

7 Channel Up / Down Control:

These keys control the same functions as your original remote

control.

8 Mute Key:

The Mute key operates the same function it did on your original

remote.

9 Volume Up / Down Control:

These keys operate just as those on your original remote.

10 Directional Keys

If available on your original remote, these keys will allow you to

navigate through the menu of your device.

The Keypad

- In order to avoid having to re-program your ONE FOR ALL 2

after you remove the batteries, you will need to insert new

batteries within 5 minutes. Also it is recommended that you

do not use rechargeable batteries.

- On the inside of the battery compartment door you will find

a label on which to write your Set-Up Codes for future

reference. This you will do after setting up your ONE FOR

ALL 2 remote for your devices.

WWW.ONEFORALL.COM 4

WWW.ONEFORALL.COM 5

11 OK key

If your original remote control required that you press an “OK” or

“ENTER” key during Menu operation, this key can be used for this

function.

12 Menu Key:

Controls the same function as it did on your original remote control.

13 Exit Key:

The Exit key will exit the Menu.

14 16:9 key

In TV mode this key allows you to access the wide screen (16:9) view

option of your television (if available on your original remote). In

VCR mode it obtains the TV/VCR function.

15 VCR keys (PLAY, STOP, REW etc.)

After pressing the VCR mode key, the Playback keys operate the

same functions of your Video Recorder Keys. To prevent accidental

recording, the RECORD key must be pressed twice.

In VCR mode the SP/LP key controls the tape speed function, the

AUTO key controls the auto tracking function, just like on your orig-

inal remote.

16 Teletext Functions:

After pressing the TV key, the transport keys (REW, PLAY, FF, PAUSE)

are used to operate the main Teletext functions. The symbols below

the keys are for Teletext. The text keys are used to access the

Teletext functions of your television. Of course, your television must

have Teletext capability.

TEXT ON: Puts your television in the teletext mode.

HOLD/STOP: Stops the television changing text pages.

EXPAND: Shows the top half of the teletext page in larger

letters. By pressing again, you can see the bottom

half of the teletext page enlarged. To return to

the regular teletext viewing, press the Expand

key again, or press the Text key, depending on

your television.

TEXT OFF: Switches the television back to regular viewing

mode. On some televisions, this may be done by

pressing the TEXT key several times.

After pressing the TV key and accessing the text mode, the bottom row of

the Video Recorder keys marked red, green, yellow and blue, allow you

to access the Fastext functions of your television. If on your original

remote control these keys are used for Menu navigation, the ONE

FOR ALL Fastext keys may operate in the same way.

- For a more detailed explanation of the Teletext and Fastext functions,

please refer to the manual of your television. Remember, different

televisions control Teletext and Fastext in different ways. Not all

Teletext functions may be available for your particular model.

The Keypad

6WWW.ONEFORALL.COM

Example: To set up the ONE FOR ALL 2 for your television:

1. Make sure your device (television) you wish to operate

is switched on (not in standby).

2. Find the code for your device in the Code List

(page 12 - 19). The device codes are listed per device

type and brand name. Also the most popular code for

each brand is listed first. If your brand is not listed

at all, try the Search Method on page 7.

3. Press the device mode key (TV) on the ONE FOR

ALL 2 remote for the device you wish to set up.

4. Press and hold down MAGIC until the red light

blinks twice (the red light will blink once then twice).

5. Enter your four-digit device code using the num-

ber keys. The red light will blink twice.

6. Now aim the ONE FOR ALL 2 remote at your

device (television) and press POWER. If your

device switched off, the ONE FOR ALL 2 is ready to

operate your device.

Setting up the ONE FOR ALL 2

(How to set-up the ONE FOR ALL 2 to control your devices)

Direct code set-up

- Most TV’s do not switch back on pressing the POWER key, please try

pressing a “number” key or the “TV-text off” key to switch your TV

back on.

- If your device does not respond, follow steps 1 through 6 with each

code listed for your brand. If none of the codes listed for your brand

operate your device, then try the Search Method described on page 7,

even if your brand is not listed at all.

- Some codes are quite similar. If your device does not respond or is not

functioning properly with one of the codes, try another code listed

under your brand.

- If the original remote control from your Video Recorder did not have a

POWER key, press PLAY instead of POWER during step 6.

- To set up your other devices, follow the same instructions above, only

press the appropriate device key during step 3.

- Remember to press the correct device key before operating your

device. Only one device can be assigned to a device key.

- Write your device code in the applicable four digit boxes

provided in the battery compartment and on page 8 for future

reference.

ONE FOR A

Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

0009

0087, 0093, 0363, 041

0217, 0216

0264

0516

0087

0216, 0009, 0037,

0037, 0274

0361, 0208, 0371

____

6WWW.ONEFORALL.COM

To set up for a second TV or VCR (See mode re-assignment,

Page 9).

Devices can be found under the following keys:

Television Video Recorder

Search method

--> If your device does not respond to the ONE FOR ALL 2 after you

have tried all the codes listed for your brand.

--> If your brand is not listed at all.

The Search Method allows you to scan through all the codes contained

in the memory of the ONE FOR ALL 2.

Example: To search for your television code:

1. Switch your television on (not in standby).

2. Press the TV key on the ONE FOR ALL 2.

3. Press and hold down MAGIC until the ONE FOR ALL

2 red light blinks twice (the red light will blink once

then twice).

4. Press 9 9 1. The red light will blink twice.

5. Next, press POWER.

6. Aim the ONE FOR ALL 2 at your Television. Now press

CH+ over and over, until your Television turns off

(every time you press the CH+ key the ONE FOR ALL 2

will send out a POWER signal from the next code

contained in the memory). You may have to press

this key many times (up to 150 times) so please

be patient.

If you skip past a code, you can go to the previous

code(s) by pressing the CH- key. Remember to keep

pointing the ONE FOR ALL 2 at your Television while

pressing this key.

7. As soon as your television turns off, press MAGIC to

store the code.

- Most TV’s do not switch on pressing the POWER key. Please try pressing

a “number” key or the “TV-text off” key to switch your TV back on.

- If you cannot control your Television properly, please continue the

Search Method, you may be using the wrong Code.

- To search for the code for another device follow the instructions above

only press the appropriate device key instead of TV during step 2.

- If the original remote control of your Video recorder does not have a

POWER key, press PLAY instead of POWER during step 5.

WWW.ONEFORALL.COM 7

Setting up the ONE FOR ALL 2

8WWW.ONEFORALL.COM

Once you have Set-Up your ONE FOR ALL 2, you can blink back your

Set-up Code for future reference.

Example: to blink out your television code:

1. Press the TV key once.

2. Press and hold down MAGIC until the ONE FOR ALL

2 red light blinks twice (the red light will blink once

then twice).

3. Press 9 9 0. The red light will blink twice.

4. For the first digit of your four-digit code, press 1 and

count all the red blinks. If there are no blinks, the

digit is „0“.

5. For the second digit of your four-digit code, press 2

and count all the red blinks. If there are no blinks,

the digit is „0“.

6. For the third digit of your four-digit code, press 3

and count all the red blinks. If there are no blinks,

the digit is „0“.

7. For the fourth digit of your four-digit code, press 4

and count all the red blinks. If there are no blinks,

the digit is „0“. Now you have your four-digit

code.

Code blink out

(To find out which code is currently programmed)

- To blink back the code for your other devices, press the appropriate

device key during step 1.

Device Type

1 ……………………………………

2 ……………………………………

■■■■■■ ■■

Quick Code Reference

Make sure you write down the codes for your devices in the

boxes below and in the battery compartment for future easy

reference.

WWW.ONEFORALL.COM 9

It is possible to change the mode of any device key. This is useful if you

want to set up two of the same devices on the ONE FOR ALL 2. The code

can be set up using “Direct code set up” (p. 6) or “Search method” (p. 7).

To change a device key, see the three examples below.

Example 1 if you like to program a second TV on the VCR key.

Example 2 if you like to program a second VCR on the TV key.

Example 1:

To program a second Television on the VCR key (for example), you need

to change the VCR key into a TV key, so press:

(*) (**)

The VCR key has now become a second TV key.

Now enter the Set-Up code for your second TV by pressing:

(*) (TV code) (**)

Example 2:

To program a second Video Recorder on the TV key (for example), you

need to change the TV key into a VCR key, so press:

(*) (**)

The TV key has now become a second VCR key.

Now enter the Set-Up code for your second VCR by pressing:

(*) (VCR code) (**)

Resetting a Device key

Example: To reset the TV key to its original mode, press:

(*) (**)

Example: To reset the VCR key to its original mode, press:

(*) (**)

(*) Press and hold down the MAGIC key until the red light (LED)

blinks twice.

(**) The red light (LED) will blink once then twice.

Extra Features

Mode re-assignment

(Changing a device mode)

____

10 WWW.ONEFORALL.COM

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR

ALL 2 may operate the colour and brightness settings of your television.

Colour (+) = Press and release MAGIC then hold Volume (+)

Colour (-) = Press and release MAGIC then hold Volume (-)

Brightness (+) = Press and release MAGIC then hold Channel (+)

Brightness (-) = Press and release MAGIC then hold Channel (-)

Volume Punch Through

You may be able to use some functions of your Television, Video recorder

at the same time. For example: if you are watching a program on your

video recorder, you can adjust the volume (a TV function) without pressing

the TV mode key on your ONE FOR ALL 2. The table below lists some of the

possibilities.

Last Device Mode Key Pressed: You Can Control:

VCR TV volume up and down, mute

To punch through to TV volume while in the VCR mode:

1. Press and hold MAGIC until the red light blinks

twice.

2. Press 9 9 3.

3. Then press the TV key and the red light will blink

twice.

To cancel the “Volume Punch Through” per mode:

(Example: to cancel the “Volume Punch Through” for the VCR mode)

1. Press VCR once.

2. Press and hold down the MAGIC key until the red

light blinks twice.

3. Press 9 9 3.

4. Then press the Volume (-) key and the red light will

blink four times.

Example: being in VCR mode, you will be able to control VOL+/- or MUTE

functions of your VCR (provided it has volume control).

To cancel the „Volume Punch Through“:

1. Press and hold MAGIC until the red light blinks

twice.

2. Press 9 9 3.

3. Press the Volume (+) key and the red light will blink

four times.

Extra Features

VOL

Andere Handbücher für Easy 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere One Forall Universalfernbedienung Handbücher

One Forall

One Forall iLifeTV Bedienungsanleitung

One Forall

One Forall URC-7721 Bedienungsanleitung

One Forall

One Forall URC-4021 Bedienungsanleitung

One Forall

One Forall 704917 Bedienungsanleitung

One Forall

One Forall KAMELEON 5 URC-8305 Bedienungsanleitung

One Forall

One Forall Zapper URC-6512 Bedienungsanleitung

One Forall

One Forall 704918 Bedienungsanleitung

One Forall

One Forall URC-7556 Bedienungsanleitung

One Forall

One Forall URC-7532 Bedienungsanleitung

One Forall

One Forall URC-7800 Cinema 7+ Bedienungsanleitung

One Forall

One Forall URC-7930 Bedienungsanleitung

One Forall

One Forall URC-7560 Bedienungsanleitung

One Forall

One Forall URC-4063 EASY 4 Bedienungsanleitung

One Forall

One Forall SO EASY URC-2530 Bedienungsanleitung

One Forall

One Forall URC-7562 Bedienungsanleitung

One Forall

One Forall URC 4700 Access 4 Bedienungsanleitung

One Forall

One Forall URC-7010 Bedienungsanleitung

One Forall

One Forall URC-3300 Bedienungsanleitung

One Forall

One Forall Xsight Touch Bedienungsanleitung

One Forall

One Forall URC-8350 Bedienungsanleitung

One Forall

One Forall URC-3445 Administratorhandbuch

One Forall

One Forall Xsight Colour Bedienungsanleitung

One Forall

One Forall URC-7730 Bedienungsanleitung

One Forall

One Forall URC-6230 Bedienungsanleitung

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

GE 24929 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

GE RM94931 Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

GE RM24965 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

GE RM24950 Bedienungsanleitung