Onkyo TX-NR656 Gebrauchs- und Pflegehandbuch

Firmware Update Onkyo TX-NR656, TX-

NR757, TX-RZ610, TX-RZ710, TX-RZ810 &

HT-R695 (HT-S7800)

(1-29-2018)

We are pleased to offer this firmware update for the best possible

performance of your Onkyo AV Receiver.

This update MUST be installed via USB.

TX-NR656, TX-NR757, TX-RZ610, TX-RZ710, TX-RZ810 & HT-R695

(Current Version 2109-4040-7080-0008)

The 1/29/2018 update will address the following, and includes

previous updates:

1. Adds support for external audio inputs for "FlareConnect".

*For detail about external audio inputs by model, please refer to:

http://www.onkyo.com/flareconnect/

2. Minor bug fixes and improvements stability.

Previous Updates (latest firmware includes all previous)

The 12-18-2017 update will address the following:

1. Adds support for pass-through function of Dolby Vision signal.

*Set the HDMI OUT to “MAIN” to get the Dolby Vision pass-through

(EXCEPT TX-NR555). Dolby Vision will not be available if the HDMI

OUT is set to “MAIN +SUB”.

The 11-2-2017 update will address the following:

1. Adds support for new multi-room audio playback function

"FlareConnect".

*All audio devices in group and "Onkyo Controller" App is required to

update to the latest version.

•Setup Guide: www.intl.onkyo.com/next_generation/setup.html

Introduction of multi-room audio

functions: www.intl.onkyo.com/next_generation

3. Minor bug fixes and improvements stability.

The 8/31/2017 update will address the following:

1. Expand playable content of DTS:X.

2. Adds "Play Queue" function.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/queue_onk.pdf

3. Adds "Search/ Sort" function on Music server.

4. Adds "Display WAV file information (album art, artist, album) via USB"

function.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/audio1709_na_onk.pdf

*Additional functions depend on model.

5. Minor bug fixes and improvements stability.

The 4/25/2017 update will address the following:

1. Adds support for Chromecast built-in.

a. Chromecast-enabled applications are required to enjoy

Chromecast built-in.

b. As part of setup, before starting to use Chromecast built-in,

you need to accept the PRIVACY POLICY on our smartphone

application "Onkyo Controller" (iOS/Android).

c. For more detailed instructions, please refer to below link:

http://www.onkyo.com/manual/sup/upd/chromecast_onk.pdf

2. Minor bug fixes and performance improvements

*Note for Bluetooth pairing.

If Bluetooth devices were previously paired, you must pair the

devices again after the Firmware update is complete.

The 2/23/2017 update will address the following:

1. Minor bug fixes and performance updates.

2. Adds baseline support for FireConnect.

This update will enable streaming from Network Services /USB/

Bluetooth/Music server.

*Sampling rates of 44.1 kHz and 48 kHz are supported.(USB/Music

server)

*Onkyo Controller App is required to enjoy FireConnect.

*Note for Bluetooth pairing: If Bluetooth devices were previously

paired, you must pair the devices again after the Firmware update is

complete.

The 11/9/2016 update will address the following:

1. Minor bug fixes and performance updates.

The 8/31/2016 update will address the following:

1.DTS:X functionality*

2. Tidal and Deezer functionality

* After applying the update, users must recalibrate using AccuEQ.

The 4/19/2016 update will address the following:

•Several network functionality improvements, including network

connectivity with some dual-band wireless routers.

To check if your firmware is the latest version, go in to Setup -> Misc.

-> Firmware Update and check the version number. If any of the

numbers differ from the latest version available, please update your

unit.

Update via USB storage

Note: Please remove the wired/wireless connection before updating

through USB. Please prepare a USB storage device such as a USB

flash memory stick. You need at least 128 MB of available space to

update the firmware. Please unpack the ZIP file onto an empty USB

Stick that has been formatted with the FAT file system.

We hope you enjoy the improved functionality this update provides to

your AV Receiver.

Precautions for the Firmware Update

Please read the update instructions carefully before beginning.

The firmware update should take up to 30 minutes. Once the update

begins, don't turn off the power supply to the A/V receiver until it is

time to restart it.

Depending on the conditions of the network, a firmware update via a

network may take more than one hour or even fail to finish. If the

update is not completed within two hours, turn off the power supply

by pushing the ON/STANDBY button and then try updating again

from the beginning.

Updating the firmware and adjusting the settings will be done

automatically, but may take some time to complete. Please follow the

procedures as instructed when you update. Note that the update may

fail, or cause problems for your A/V receiver, if you do any of the

following:

•Pull out the A/V receiver’s power cord;

•Interrupt the power supply to the A/V receiver (e.g. if the

breaker is tripped or if there is an electrical outage);

•Insert or remove the LAN cable from a device in your network

when updating over a network;

•Insert or remove a USB memory device from the A/V receiver

when updating via USB;

•Operate components connected to the A/V receiver via HDMI,

such as a TV or a recording device.

If your A/V receiver is damaged for any of the reasons above, an

Onkyo service center will repair the unit for a fee.

If you see "No Update" on the front panel immediately after you have

started the firmware update process, you have the latest firmware. In

this case it is not necessary to do this update.

How to prepare the USB Memory Device:

1. Download the zipped firmware update file and save to the Desktop of your

computer.

2. http://download.onkyo.com/AVR001F/ONKAVR001F_E70000EAEAE

OEO_116.zip

3. Right click on the file and select “Extract All” and place the extracted folder

on the Desktop of your computer:

1. Connect the USB Memory Device to the USB port of your computer

and copy the contents of the unzipped/extracted folder onto your

USB Memory Device.

2. Safely eject the USB Memory Device from your computer.

How to upgrade the firmware via USB:

1. Insert the USB Memory Device containing the software into the USB port

of the receiver.

2. Turn on the receiver and select the SETUP input on the front panel, then

select “Misc”, press Enter, then “F/W Update” and press Enter, scroll down

to select “Update via USB”.

3. Press the “Enter” button on the front panel to begin the update.

4. Do not shut the unit off until “Complete” is shown on the front display. This

will take up to 30 minutes.

5. Once the update has completed check the firmware version to confirm that

the unit is fully up to date. If it is not, run the update again.

To check the firmware version, press the SETUP button on the front

panel. Highlight “Misc” and press enter. Highlight “F/W Update” and press

Enter. Scroll down to the Firmware Version number to verify the current

installed version.

Current Version 2109-4040-7080-0008

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Onkyo Empfänger Handbücher

Onkyo

Onkyo TX-DS787 Bedienungsanleitung

Onkyo

Onkyo HT-RC260 B Bedienungsanleitung

Onkyo

Onkyo SKR-3600 Bedienungsanleitung

Onkyo

Onkyo TX-RZ1100 Installationsanleitung

Onkyo

Onkyo TX-SR505 Bedienungsanleitung

Onkyo

Onkyo TX-DS797 Bedienungsanleitung

Onkyo

Onkyo TX-NR626 Montageanleitung

Onkyo

Onkyo S770 - HT Home Theater System Bedienungsanleitung

Onkyo

Onkyo TX-NR474 Bedienungsanleitung

Onkyo

Onkyo HT-R540 Bedienungsanleitung

Onkyo

Onkyo TX-NR807 Montage- und Bedienungsanleitung

Onkyo

Onkyo TX-SR707 Bedienungsanleitung

Onkyo

Onkyo TX-NR1008 Bedienungsanleitung

Onkyo

Onkyo HT-RC360 Bedienungsanleitung

Onkyo

Onkyo TX-SV353 Bedienungsanleitung

Onkyo

Onkyo TX-SR403 Bedienungsanleitung

Onkyo

Onkyo DR-S2.2 Bedienungsanleitung

Onkyo

Onkyo HT-R518 Technisches Datenblatt

Onkyo

Onkyo TX-NR646 Installationsanleitung

Onkyo

Onkyo HT-S7500 Bedienungsanleitung

Onkyo

Onkyo TX-SR383 Handbuch

Onkyo

Onkyo HT-RC160 Bedienungsanleitung

Onkyo

Onkyo TX-RZ610 Bedienungsanleitung

Onkyo

Onkyo TX-NR636 Installationsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung