Specs 7
Specs
Detailed Description of the Machine
The 3D scanner has a solid external structure. All the covers are integral part of the tool and must not be removed or
tampered with in any way so not to compromise the correct functioning of the apparatus.
The power connection and the power switch are on the back of the scanner. The frontal part of the scanner is the
access point to the scanning area framed by the optical head.
The optical head lodges the opto-electronic components for the acquisition of the object surface.
NeWay's optical head comprises two black-white video cameras and a DMD projector. The set up of these three
components allows one single scanning field.
Any other application not present here has not been contemplated by the manufacturer and, therefore, cannot
be performed.
Repairs and/or Safety Devices
The 3D scanner is fitted with external metal panels and plastic covers, which keep electrical parts (feeders) out of
reach.
The electrical motors for the movement system and the projector electric supply work on low voltage (24V).
The manufacturer declines any responsibility arising from accidents deriving from partial or total removal of
the protective panels.
Unauthorized uses of the machine
•• Using the 3D scanner with damaged wires or plugs
•• Using the 3D scanner with open or removed panels
•• The 3D scanner has been designed to work in a controlled light condition. If the scanner is placed under a
strong source of light (like the direct sun) or anyways more intense than the internal light, the best
scanning performances are not guaranteed
•• Do not expose the 3D scanner to the rain nor place it in places where water is present (bathtub, basin, sink
or washtub, wet floor, near a swimming pool or any similar situation).
Noise emission
The noise the machine produces, intended as the level of sound pressure in the workplace, is <80 dB (A).
Vibration, radiations fine particles emitted by the machine
The unit does not emit any vibrations, fine particles and radiation when operating.
Gasses and fumes emitted by the machine
The unit does not emit any gasses and fumes when operating.
Electrical System
See electrical diagram attached.
