Opticon OPL 972 Series Bedienungsanleitung

OPL972X/CRD972X OPTICON - 1

OPL 972X

CRD 972X

USER'S

MANUAL

Opticon Article Code O0220000410

Regulatory Approvals

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this equipment.

(Example - use only shielded interface cables when connecting to computer or peripheral

devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20

centimeters between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

The antennas used for this transmitter must be installed to provide a separation distance of at

least 20 cm from all persons and must not be co-located or operating in conjunction with any

other antenna or transmitter.

2 - OPTICON OPL972X/CRD972X

LIMITED WARRANTY AND

DISCLAIMERS

BY OPENING THE PACKAGE OF THIS PRODUCT YOU

AGREE TO BECOME BOUND BY THE LIABILITY AND

WARRANTY CONDITIONS AS DESCRIBED BELOW.

UNDER ALL CIRCUMSTANCES THIS MANUAL

SHOULD BE READ ATTENTIVELY, BEFORE

INSTALLING AND OR USING THE PRODUCT.

Serial number

A serial number appears on all Opticon products.

This official registration number is strictly related to

the device purchased. Make sure that the serial

number appearing on your Opticon device has not

been removed. Removing the serial number might

affect the warranty conditions and liability

disadvantageously, so please be strict at

maintaining the label with serial number on the

Opticon product.

Warranty / Warranty period / Liability

Unless otherwise agreed in a contract, all Opticon

products are warranted for the period of one year

after purchase, covering defects in material and

workmanship. Opticon will repair or, at its opinion,

replace products that prove to be defective in

material or workmanship under proper use during

the warranty period. Opticon will not be liable in

cases where modifications are made by the

customer. In such case the standard repair charge

will be applicable. The standard charge for repair

will also be applicable in cases where no defect is

found at all. These rules also apply for products

that are still under warranty. Under no

circumstance will Opticon Sensors Europe, be

liable for any direct, indirect, consequential or

incidental damages arising out of use or inability to

use both the hardware and software, even if

Opticon has been informed about the possibility of

such damages.

Packaging

We recommend that you save all packing material,

as it should be used whenever you need to

transport your scanner (eg. for service). Damage

caused by improper repacking is not covered by

the warranty.

Trademark

Trademarks used are property of their respective

owners.

Version 3, printed 03/2004

CAUTION: This information is subject to change

without prior notice.

This manual may not, in whole or in part, be

copied, photocopied, reproduced, translated or

converted to any electronic or machine readable

form without prior written consent of Opticon

Sensors Europe.

THE GENERAL USE AND FUNCTIONING OF

THE BAR CODE DATA COLLECTOR TOGETHER

WITH THE CRADLE IS DESCRIBED IN THIS

MANUAL. THE EXACT BEHAVIOUR OF THE BAR

CODE DATA COLLECTOR DEPENDS ON THE

USER APPLICATION THAT IS RUNNING. FOR

INSTRUCTIONS ABOUT APPLICATIONS

CONSULT THE DOCUMENTATION OF THAT

SOFTWARE.

OPL972X/CRD972X OPTICON - 3

CONTENTS

1 INTRODUCTION .................................4

1.1 Unpacking............................................5

1.2 Detailed view .......................................6

1.2.1 Barcode data collector details..............6

1.2.2 cradle details........................................7

1.3 Handling instructions ...........................8

2 GET STARTED....................................9

2.1 Fix Hand strap ...................................10

2.2 Battery instructions ............................10

2.2.1 How to charge the battery..................10

2.2.2 How to (re)place the battery .............. 11

2.3 Installation instructions ......................12

2.3.1 Connect charging cradle....................12

2.3.2 Connect RS232 cradle.......................13

2.3.3 Connect RS232 multicradle ...............14

2.3.4 Connect USB to windows PC ............15

2.3.5 Connect RS485 multicradle network .16

2.4 DIP Switch settings............................17

2.5 Bluetooth installation..........................18

2.5.1 Set or search Bluetooth device

address:18

2.5.2 Security..............................................19

2.6 Communication ................................. 20

2.6.1 RS32 interface .................................. 20

2.6.2 USB interface .................................... 20

2.6.3 multicradle single communication ..... 20

2.6.4 Bluetooth bar code data collector...... 20

3 READING BAR CODES ................... 21

4 TROUBLE SHOOTING ..................... 22

4.1 Communication malfunctioning ......... 22

4.2 Read operation malfunctioning ......... 23

4.3 Barcode data collector

malfunctioning................................... 23

4 - OPTICON OPL972X/CRD972X

1 INTRODUCTION

The bar code data collector

The OPL972X is a range of handheld bar code

data collectors, that are well suited for a variety of

portable applications. Using a built-in laser scanner

they can read all popular types of bar code labels

at varying distances. There are several models to

meet a variety in use. All models are equipped with

data memory to collect the scanned data.

User's applications can be downloaded to the bar

code data collector to adapt it to the user's

situation. As a tool to develop an application

Opticon can supply a compiler and a development

kit.

Operating power is supplied by the rechargeable

battery. For recharging there are several cradles

available. A single cradle can charge one data

collector. A multi cradle can charge up to 5 data

collectors.

For communication the IrDA interfaced models can

communicate through a communication station. In

common the cradle supports communication for

one bar code data collector. There is also a model

available that supports communication up to 5 bar

code data collectors.

The Bluetooth model can communicate with the

SIG certified Bluetooth devices. The SPP and DUN

profile are supported.

The cradle

The cradle provides functionality for charging and/

or communication in several combinations. The

combinations are supported in different models:

• Charging cradle: A charging station for the bar

code data collector that charges the

rechargeable battery as soon as the bar code

data collector is placed.

• Single cradle: A regular communication and

charging station. It charges the rechargeable

battery as soon as the bar code data collector is

placed. Data will be transmitted to the host

through RS232 or USB.

• Multicradle, single communication, multiple

charging: A multi cradle equipped with 5 slots to

keep up to 5 data collectors. One slot supports

communication, data will be transmitted to the

host through RS232 or USB. All slots charges the

rechargeable battery as soon as the bar code

data collector is placed.

• Multicradle, multiple communication, multiple

charging: A multi cradle equipped with 5 slots to

keep up to 5 data collectors, extended with

RS485 connection. All slots have the same

functionality. They charge the rechargeable

battery as soon as the bar code data collector is

placed. Data will be transmitted to the host

through RS232 or USB. The RS485 feature

enables to create a network of multicradles.

OPL972X/CRD972X OPTICON - 5

1.1 UNPACKING

When you remove the packing, please check for

any physical damage. We recommend that you

save all packing material, as it should be used

whenever you need to ship your barcode data

collector (eg. for service). Damage due to improper

repacking is not covered by the warranty.

Apart from the bar code data collector, charger or

cradle, additional items might be ordered and

supplied. If there are any missing parts please

contact your supplier.

OPL972X contents:

• Bar code data collector: model applicable as

supplied (A)

• Battery (B)

• Hand strap (C)

CRD972X contents:

• Cradle: model applicable as supplied (a)

CRD972X accessories

• Interface cable(s): model applicable as supplied,

can be supplied as separate item (b)

• Power supply, supplied as separate item (c)

Do not remove the product label!

On the back of every unit you will find a product

label. This is attached by the manufacturer and

includes product information and serial number. Do

not remove it.

6 - OPTICON OPL972X/CRD972X

1.2 DETAILED VIEW

1.2.1 BARCODE DATA COLLECTOR DETAILS

Depending on the supplied model, the following

options are applicable:

1. Reading window / Optical window

For the emission of laser beam for bar code

reading / optical data transmission

2. Indicator

LED indicator or buzzer can be used to indicate

results, for example bar code reading / status of

communication / status of charging

3. LCD Display

For displaying information

4. Operating key(s)

Definable by application

• 1-key model:

Typical use as trigger key to switch laser beam on

for bar code reading

• other models:

Typical use of middle key as trigger key to switch

laser beam on for bar code reading.

Typical use of left and right key as menu scroll

keys or yes/no input

• keyboard:

Typical use of top middle key as trigger key to

switch laser beam on for bar code reading.

Typically basic functions for data input, as below:

: scroll up

: scroll down

+ SHIFT : scroll left

+ SHIFT: scroll right

BS : Back space

CLR : Cancel input

ENT : (Enter) to confirm input

The standard appearance of the alphanumeric

keys is the numeric value. Together with the

SHIFT key the alpha characters appear.

5. Battery case cover

For housing battery

6. Hand strap pillar

For attaching hand strap

7. Charging contacts

For power supply from cradle to bar code data

collector

8. Product label

Contains product information and serial number.

Do not remove it!

OPL972X/CRD972X OPTICON - 7

1.2.2 CRADLE DETAILS

Depending on the supplied model, the following

options are applicable:

1. DC input socket

Input for AC power supply

2. RS 232-C socket

Left connector (RS232C-1): for connection to PC

through Opticon RS232 cable

Right connector (RS232C-2): for optional

connection to second device

3. USB socket

For connecting to PC, through Opticon USB cable

4. RS 485 socket

For connection of cradle network

5. Product label

Contains product information and serial number.

Do not remove it!

6. DIP switches

Set parameters of the optical communication

interface, do not change unnecessary.

7. Electrical contacts

If the OPL972X bar code data collector is inserted

the battery will automatically be charged.

8. Optical window

Optical communication interface for data

transmission

9. LED indicator

Show current status. Read more at the installation

instructions.

1212

3 4

8 - OPTICON OPL972X/CRD972X

1.3 HANDLING INSTRUCTIONS

To avoid malfunctioning and to ensure years of

trouble free operation, pay attention to the

following:

A. Temperature conditions

Use in area's between 0 and 40 °C.

Do not expose the scanner for a long time to

extreme conditions - like direct sunlight, near a

heater, or in a car - or in areas that are very cold,

humid, moisturized or dusty.

Do not expose the product to rain or water splash.

Avoid temperature changes. Sudden temperature

changes can cause condensation to form on the

bar code data collector. Using the bar code data

collector while condensation is present can cause

malfunction. Always wait until the condensation

clears naturally before attempting operation.

B. Shock

Do not subject the product to very strong impact,

do not throw or drop the bar code data collector

from large heights.

Do not allow a mechanical shock to the product.

Do not leave the bar code data collector in an area

where static charge is accumulated, or near

devices where electromagnetic emission is

generated.

Do not place any objects on top of the bar code

data collector. Do not lay the bar code data

collector face down. Doing so can cause accidental

operation of the key(s).

C. Use of the cradle

Do not place any product other than the OPL972X-

type bar code data collector in the CRD972X

cradle.

ADEB

0 C

+ 40 C

OPL972X/CRD972X OPTICON - 9

D. Cleaning instructions

Clean the reading window periodically with a soft

dry cloth.

Clean the exterior by wiping it with a soft, dry cloth.

Do not use thinner, white spirit or other solvents.

These can discolour the case and the keys and has

a negative effect on the lifetime of the keys.

Clean the electrical contacts of the bar code data

collector and the cradle with a soft dry cloth, or

cotton bud.

Avoid touching the contacts The contacts must stay

as clean as possible to maintain optimal charging

capacity.

Do not use water when cleaning the cradle. This

can cause malfunction.

E. Maintenance

There are no user-serviceable parts inside the bar

code data collector or the cradle. So do not try to

take it apart. The manufacturer will not be liable for

any damage caused by the customer. In case of

serious malfunction, please consult your supplier.

2 GET STARTED

Fix hand strap to bar code data collector.

Use the hand strap properly to avoid drop.

Read instructions in this manual.

Insert battery.

To be sure of proper operation, it is advised to start

with a fully charged battery. First charge the bar

code data collector for 8 hours.

Read instructions in this manual.

Place the cradle in normal office conditions.

Avoid a place under strong light. Otherwise infra

red communication may be disturbed.

Read instructions in this manual.

Use properly.

Take notice that the CRD972X cradle is designed

for the OPL972X bar code data collector.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Opticon Barcode-Lesegerät Handbücher

Opticon

Opticon OPR3301 Bedienungsanleitung

Opticon

Opticon OPR 3201 Bedienungsanleitung

Opticon

Opticon OPR 3101 Bedienungsanleitung

Opticon

Opticon NFT 2200 Bedienungsanleitung

Opticon

Opticon OPR 2001 Bedienungsanleitung

Opticon

Opticon OPN-3102i Bedienungsanleitung

Opticon

Opticon OPI 4002 Bedienungsanleitung

Opticon

Opticon LGZ 7225 Bedienungsanleitung

Opticon

Opticon OPI 2201 Bedienungsanleitung

Opticon

Opticon NLB-1000 Bedienungsanleitung

Opticon

Opticon OPN-3102i Bedienungsanleitung

Opticon

Opticon OPR 2001 Bedienungsanleitung

Opticon

Opticon NFT 1125 Series Bedienungsanleitung

Opticon

Opticon MDI-4000 Series Bedienungsanleitung

Opticon

Opticon LPN5627 Bedienungsanleitung

Opticon

Opticon OPN2003 Bedienungsanleitung

Opticon

Opticon OPR 3101 Referenzhandbuch

Opticon

Opticon OPN2005 Bedienungsanleitung

Opticon

Opticon RFI3793B Bedienungsanleitung

Opticon

Opticon PHL 2700 Bedienungsanleitung

Opticon

Opticon OPL 2724 ZAPPER Bedienerhandbuch

Opticon

Opticon OPN2002 Bedienungsanleitung

Opticon

Opticon OPI-3601 Bedienungsanleitung

Opticon

Opticon LPN 1736 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung