Optomed Smartscope Konfigurationshandbuch
General Use of Smartscope and
Smartscope PRO with M5
OVERVIEW
•Indications for use of Smartscope PRO with M5
•Features of M5 device
–Screen icons & indicators
•Usage
–Powering on/off
–Attaching optics
–Taking an image
–Cradle and USB connection
–Wifi
•Battery replacement
•Problem solving
INDICATIONS FOR USE
•Smartscope Pro is the leading portable fundus camera in the market. It
enables non-mydriatic fundus imaging and documentation of patient data
through digital images and video.
•Supported optics lenses and their intended uses are:
–EY4: Lens for fundus imaging
–EY3: Lens for fundus imaging
–ES2: Lens for anterior ophthalmic imaging
–SK1: Lens for dermatoscopic imaging
–OT1: Lens for otoscopic imaging
ES2
OT1
SK1
EY4 M5
Cradle
FEATURES OF THE DEVICE
POWER LED
LEFT SOFT KEY
ARROW KEYS
CONNECTION
LED
RESET BUTTON
RIGHT SOFT
KEY
MIDDLE KEY
INDICATORS
Left soft key
–To power on the device
–To power off the device, with long press
Right soft key
–Open menu with long press
Left LED-indicator Green
−Active when device is powered on
−Blinking when battery is charged
Right LED-indicator Blue
−Active when device is connected to PC
FEATURES OF THE DEVICE
BAYONET
CONNECTOR
SYSTEM
CONNECTOR
BAYONET HOLE
OPTICS RELEASE
BUTTON
DUALACTION
SHUTTER
SNAP FOR
OPENING
BATTERY
COVER
SCREEN ICONS
This indicator
changes with
optics modules
according to left
soft key function
S = Still
V = Video
Optics:
EY = eye optics,
SK = skin optics
ES = eye surface
optics
OT = ear optics
DF = no lens
Patient 1 Battery:
100% Time
Zoom indicator Diopter compensation
indicator in manual
focus mode when using EY4
Autofocus /
Manual focus /
AF Assist (with EY4)
Brightness indicator
10 steps
EY4 optics attached:
Target high / low / off
W
This indicator
changes with
optics modules
according to middle
key function
ES2 optics attached:
W= White light
B= Blue light
POWERING ON / OFF
•Camera is powered on by
pressing left soft key.
•Camera is powered off by
keeping left soft key pressed
down over 2 seconds.
LEFT SOFT KEY
ATTACHING AND DETACHING OPTICS
MODULE
•Optics is attached by placing bayonet
legs on the holes and optics is pressed
firmly to the device.
•Optics is released by sliding release
button.
BAYONET
LEGS
BAYONET
HOLES
OPTICS RELEASE
BUTTON
TAKING AN IMAGE
•With Smartscope PRO it is possible to capture both still images and
video.
•The capture mode is selected in optics based menu tab.
•Still image is captured by pressing the dual action shutter to the
second position.
•If assist mode is used (feature of EY4 optics) an image is taken
automatically as soon as the aim help circle has turned green.
•Video is captured by keeping the dual action shutter pressed down
in second position.
•It is also possible to take images and video by pressing shutter
button half way. This can be enabled from optic specific menu.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Optomed Medizinische Geräte Handbücher
Optomed
Optomed Smartscope PRO Bedienungsanleitung
Optomed
Optomed Aurora Bedienungsanleitung
Optomed
Optomed Polaris Bedienungsanleitung
Optomed
Optomed SMARTSCOPE PRO - Simply Brilliant Betriebsanleitung
Optomed
Optomed HALO Bedienungsanleitung
Optomed
Optomed Aurora Bedienungsanleitung
Optomed
Optomed AURORA IQ Bedienungsanleitung
Beliebte Medizinische Geräte Handbücher anderer Marken
TekTone
TekTone Tek-CARE160 Bedienungsanleitung
NeuroMetrix
NeuroMetrix Quell 2.0 Bedienungsanleitung
AMT
AMT XLR8 Bedienungsanleitung
Medipost-Nutristoma
Medipost-Nutristoma MD300K2 Bedienungsanleitung
EDAN
EDAN SONOTRAX Pro Bedienungsanleitung
Restorative Therapies
Restorative Therapies RT300 Bedienungsanleitung
