OREC RM60W
CHECKS BEFORE DELIVERY
Check that all the shields, grids and safety guards are in place and in a good condition.
Check that the hydraulic hoses are in place and in a good condition. Replace them if necessary.
Check that there is no oil leak, repair if necessary.
Check that the safety instruction stickers are in place and in a good condition. Replace them if necessary.
Check that all the bolts and screws are properly tightened with the correct torque (refer to chart).
Protect the grease nipples by coating them with grease and lubricate the machine.
Check that the machine can work properly : check blade engagement and disengagement, check that the
safety switches work properly.
CHECKS ON DELIVERY
Show the user how to use the machine and perform the adjustments.
Explain to the user the importance of the lubrication and show him the different greasing points on the
machine.
Show him the safety devices, shields, guards and the optional equipments.
Give the instruction manual to the customer, ask him to read it carefully.
Explain to the customert that drive on the public roads is forbidden.
Explain to the customert how to use each control and how works the blade engagement. Explain to never
use the machine if the blade doesn’t disengage properly.
SAFETY RULES
CAUTION
Some of the illustrations show the machine with no guard, no shield. Never use
the machine without these devices.
Learn to stop the machine in case of emergency.
Read, understand and respect all the safety instructions of this manual.
Do not let anybody use the machine before having read and understood this manual.
Do not use the machine near bystanders : they can be hit by thrown objects
Do not let children use the machine.
Do not wear loose clothes. They might be grasped by moving parts.
Always wear protection equipments when using the machine.
Only work during daylight or with a good artificial light.
Check that the safety instruction stickers are in place and in a good state.
Keep the machine free from debris or mud.
Check that the machine can work properly before any use.
Check that all the shields, grids and safety guards are in place and in a good
condition.
It is strictly forbidden to carry persons or animals onto the machine during the work
or during the transportation.
Check that nobody stands behind the machine before moving back.
Never stop or start roughly when working on a slope. Never use the machine to work
on a stepping terrain.
Do not use machine on a slope more than 10°.
Reduce the ground speed when running on a slope and when turning straight in order
to prevent from any risk of losing control.
Be very careful when bordering ditches.
Stop the engine, apply the handbrake and remove the ignition key before any
intervention on the machine.
Never work under the machine or its parts when lifted, unless they are blocked and
maintained into position with sufficient security.
When running on a slope, always work going up or down but never across the slope.
Steer clear of unsteady embankments, holes or rocks. They might be dangerous during
manœuvres or transport.
Be careful when working on slopes.
Keep away from high-tension lines and obstacles. A contact with a high-tension line cause electrocution and
death.
Stop the machine progressively when travelling up and down slopes.
