Oregon Scientific JMR868 Bedienungsanleitung

Jumbo RF Wall Clock with Night Sensor

Model: JMR868 / NR868

User Manual

INTRODUCTION

Thank you for selecting the Oregon ScientificTM Jumbo

RF Wall Clock with Night Sensor. This device is

designed to give you many years of reliable service,

including the following conveniences:

zRadio-Controlled Calendar Clock

zTemperature Display

zNightlight with Motion Sensor

zSensor or Manual Activated Backlight

zTime Zone Offset Function

z2-Minute Crescendo Alarm

zHourly Chime Function

zDay of the Week in 1 of 5 Languages

zWall Mount and Table Stand

Keep this manual handy as you use your new product. It

contains practical step-by-step instructions, as well as

technical specifications and warnings you should know.

CONTENTS

Contents ................................................................ 1

Introduction .......................................................... 1

Key Features - Main Unit .................................... 2

Front View / LCD Symbols ............................... 2

Back View ........................................................... 2

Table Stand ......................................................... 3

Key Features - Nightlight with

Motion Sensor ...................................................... 3

Front View .......................................................... 3

Back View ........................................................... 3

Safety and Care .................................................... 4

Safety Precautions ............................................ 4

Caring for this Product ...................................... 4

Getting Started ..................................................... 4

How Your Clock Works with

the Nightlight - Overview .................................. 4

Package Contents ............................................. 4

Batteries ............................................................. 4

AC Adaptor ......................................................... 5

About Radio Reception ....................................... 5

Turning the Radio Reception ON / OFF ........... 5

Clock / Calendar .................................................. 6

Clock / Calendar Display .................................. 6

Setting the Clock / Calendar ............................. 6

Hourly Chime ..................................................... 6

Temperature ........................................................ 6

Alarm ...................................................................... 6

Alarm Display ..................................................... 6

Setting the Alarm ............................................... 6

Activating / Deactivating the Alarm .................. 7

Alarm Sound ....................................................... 7

Turning the Alarm Sound Off ............................ 7

Clock Backlight .................................................... 7

To Manually Turn the Backlight On ................... 7

To Activate the Backlight Using the

Motion / Light Sensor ......................................... 7

To Enable / Disable the

Remote-Controlled Clock Backlight .................. 7

Nightlight .............................................................. 7

Activating the Nightlight Using

the Mode Button ................................................. 7

Activating the Clock Backlight Using

the Control Button .............................................. 8

The Code Switch ................................................ 8

The Channel Switch ........................................... 8

+ Light - Rotary Knob ........................................ 8

Reset Button ...................................................... 8

Technical Specifications ..................................... 9

Troubleshooting .................................................. 10

About Oregon Scientific ..................................... 11

EC-Declaration Of Conformity ........................... 11

Jumbo RF Wall Clock with Night Sensor

Model: JMR868 / NR868

User Manual

KEY FEATURES - MAIN UNIT

FRONT VIEW / LCD SYMBOLS

BACK VIEW

1. Channel 1 / 2

zCh.1 or Ch.2 will appear when the related remote

nightlight sensor has been activated.

2. Alarm On Icon

zAppears when the alarm is enabled.

3. AL

zAppears when you are in the Alarm Display

Mode.

4. Alarm / Calendar (DD / MM)

zShows alarm time.

zShows the date in DD / MM or MM / DD format.

5. Time

zHH / MM, 12 / 24 Hour, AM / PM.

6. Radio Frequency (RF) Reception Icon

zShows the strength of the reception signal.

7. Start

zStart-time for the remotely controlled backlight

by nightlight with motion sensor.

8. Hourly Chime

zAppears when the hourly chime is enabled.

9. Stop

zStop-time for the remotely controlled backlight

by nightlight with motion sensor.

10. Battery Low Icon

zAppears when the 2 clock batteries are low.

11. Time Zone Offset / Day of the Week

zOffsets the RF time setting when you are in a

different time zone (+ / - 23 hours).

zName of the day in 1 of 5 languages.

12. Temperature

z°C / °F.

13. Light Icon with Battery Low Icon

zAppears when the 2 main backlight batteries are

low.

1. Wall Mount Hole

2. Table Stand

3. Battery Compartment

zUses 4 x UM-3 / AA 1.5V batteries.

4. LIGHT button

zPress to activate the clock backlight for 5

seconds.

5. MODE button

zPress to toggle between 3 clock displays.

zPress and hold to enter Clock Setting Mode -

time zone offset, 12- / 24-hour format, hour,

minute, year, DD / MM or MM / DD format,

month, day, day-of-the-week language and

hourly chime on / off.

6. ARROW UP and ARROW DOWN buttons

zPress to increase / decrease the value of a

setting (in any setting mode).

zPress and hold to activate / deactivate the radio-

reception (in normal Display Mode).

zPress to activate / deactivate the alarm function

when the respective alarm is selected.

7. ALARM button

zPress to toggle between 3 alarm displays.

zPress and hold in the respective Alarm Display

Mode to enter its Setting Mode for the daily

alarm, clock Code for the remote nightlight

sensor or, the remote-controlled backlight start

and stop time.

8. °C / °F - Temperature

zSlide to select between °C / °F display format.

9. RESET

zPress to return all values to the default settings.

10. EU / UK switch

zSlide to select your nearest radio signal base

i.e. England or Germany.

BACK VIEW

TABLE STAND

The wall clock can be placed on a table using the table

stand.

1. Rotary Motion Sensor

zDetects motion and activates the nightlight and

clock backlight in accordance with the

settings used.

zTwist the knob to direct the sensor to the position

you want.

2. Light Sensor

zDetects the light intensity of the environment.

3. Light ON

zPress to turn the clock backlight ON for 10

seconds remotely.

4. Power - ON / OFF

zSlide to the appropriate setting to turn the battery

or AC power ON or OFF.

5. 4.5V Adaptor Socket

6. Light Panel

zWhen activated the panel will light up.

7. LED Indicator

1. Wall Mount Hole

2. Battery Compartment

zUses 3 x UM-3 / AA 1.5V batteries.

3. Channel 1 / 2

zSlide to select either Channel 1 or Channel 2.

4. Code switch

zSlide to change the Code.

5. Mode - On / Off / Auto

zSlide switch to ON - the nightlight will turn on in

a dark room.

zSlide switch to OFF - the nightlight is turned

off.

zSlide switch to AUTO - the nightlight will only be

activated by motion in a dark room.

6. Clock Control - On / Off

zSlide switch to ON - when motion is detected,

the clock backlight will be activated.

zSlide switch to OFF - the clock backlight will not

be activated by the motion sensor.

7. + Light - Rotary knob

zRotate to adjust the sensitivity of the light

sensor.

8. Reset button

zPress to reset the nightlight.

KEY FEATURES - NIGHTLIGHT WITH

MOTION SENSOR

FRONT VIEW

SAFETY AND CARE

SAFETY PRECAUTIONS

Please observe the following safety precautions when

setting up and using this product.

zLCD panel - The LCD panel is made of glass,

and may break if the unit is dropped.

zHeat sources - Keep the product away from

heat sources, such as radiators, stoves, heaters,

and other heat-generating products.

zWater and moisture - Do not use the product in

or near water or in high moisture areas, such as

a bathroom.

zPower source - The product may be susceptible

to power surges. It should be unplugged during

severe storms or whenever you will be away

for a long time. Only use the type of power

source specified in this manual. Do not overload

power strips and extension cords, as this can

cause a fire hazard.

CARING FOR THIS PRODUCT

To ensure you receive the maximum benefit from

using this product, please observe the following

guidelines.

zDo not clean any part of the product with

benzene, thinner or other solvent chemicals -

this may cause permanent damage that is not

covered by the guarantee. When necessary,

clean it with a damp cloth.

zKeep your product away from hot, humid

conditions or strong sunlight.

zEvery effort has been made to ensure the

highest standards of reliability for your wall

clock with remote nightlight. However, if

something does go wrong, please do not try to

repair it yourself - consult your supplier.

zDo not use your product outdoors in the rain, or

handle it with wet hands - water can damage

electrical equipment.

GETTING STARTED

HOW YOUR CLOCK WORKS WITH THE

NIGHTLIGHT - OVERVIEW

zThe clock can be set independently to give you

time, calendar and alarm facilities.

zThe nightlight can be set independently to light

up in the dark so you can see where you are

going.

zThe clock and nightlight can also be used

together to turn the clock backlight on when you

walk into a dark room, or wave your arm from

the comfort of your bed. It can do this because

the nightlight has 2 types of sensor. One

sensor responds to light and the other responds

to movement. From the clock unit you can set

these sensors to be active during a certain

period of time.

PACKAGE CONTENTS

When you unpack your wall clock with remote

nightlight, make sure you keep all the packing materials

in a safe place, in case you need to later transport the

device or return it for servicing.

In the box, you will find:

zClock Unit

zRemote Nightlight

z4 x UM-3 / AA 1.5V Batteries for the Clock

z3 x UM-3 / AA 1.5V Batteries for the Nightlight

z4.5V AC Adapter

BATTERIES

The clock uses:

z4 x UM-3 / AA 1.5V batteries.

The nightlight uses:

z3 x UM-3 / AA 1.5V batteries.

NOTE It is recommended that you use alkaline

batteries with this product for longer performance.

To install the batteries, simply insert them making

sure they match the correct polarities (+ and -).

STRONG

SIGNAL WEAK SIGNAL

Clock: NOTE The nightlight has a Power ON / OFF switch to

help conserve power. Use the AC adaptor when using

the nightlight for long periods of time. The batteries

are a good power source for back-up usage.

ABOUT RADIO RECEPTION

This clock can automatically synchronize the date

and time with official time-keeping organizations in

Frankfurt (Germany) and Rugby (England). The unit

can pick up an RF signal when it is within 1500km (932

miles) of these locations.

To select the most suitable radio signal for your

location, slide the EU / UK switch to the appropriate

setting. Press RESET whenever you change the

selected setting.

NOTE For best results, place the unit away from

metal or electrical objects, and near a window with a

clear view to the sky.

TURNING THE RADIO RECEPTION ON / OFF

To turn the radio reception on:

zPress and hold the clock button for 2 seconds.

zThe RF reception icon will appear and flash on

the display to indicate it is searching for the RF

signal.

Once batteries have been installed in the clock, the

reception icon will flash to indicate it is searching for

a signal.

When the reception signal has been received the

reception icon will show the signal strength by

displaying between 0 and 3 waves:

Nightlight:

NO SIGNAL

To turn the radio reception off:

zPress and hold the button for 2 seconds.

zThe RF reception icon will disappear from the

display.

NOTE Replace the batteries whenever the low battery

icon is displayed. Change all the batteries at the

same time - it is dangerous to mix old and new batteries.

Protect your environment by taking exhausted batteries

to authorized disposal stations.

shows on the clock display when the batteries

are low.

The LED indicator on the motion sensor will flash in

red when the batteries are low.

AC ADAPTOR

The 4.5V AC adaptor connects to the nightlight as

shown below.

Calendar /

Clock / Sec

Calendar /

Clock / Day

Calendar / Clock /

Offset Time

SYMBOL LANGUAGE

English

German

French

Italian

Spanish

CLOCK / CALENDAR

CLOCK / CALENDAR DISPLAY

There are 3 types of clock display:

HOURLY CHIME

The hourly chime function when set to ON will beep

once at the beginning of every hour, and the chime

icon will show on the display.

TEMPERATURE

To choose between °C / °F, slide the switch up or

down to the setting you want.

The display can show indoor temperatures ranging

from -5°C to +50°C (23°F to +122°F).

ALARM

ALARM DISPLAY

There are 3 types of alarm display:

Press the ALARM button to toggle between the 3 types

of display.

Press the MODE button to toggle between the 3 types

of display.

SETTING THE CLOCK / CALENDAR

Before you can manually set the clock and calendar,

you must specify the current time zone you live in

and the time format (12- or 24-hour) as follows:

1. Press and hold the MODE button for 2 seconds.

The time zone offset hour digits will flash. When

an offset hour has been set (e.g. +1, the time

displayed will be the RF clock time plus 1 hour.)

2. Enter the value by pressing the or buttons.

3. Confirm the entry by pressing the MODE button.

The 12- or 24-hour display format will flash.

4. Repeat (2) and confirm the entry by pressing the

MODE button.

5. Repeat the above procedures to set the hour,

minute, year, MM / DD or DD / MM format, month,

day, day-of-the-week language and hourly chime

(On / Off).

You can select 1 of the 5 following languages:

Daily Alarm /

Clock

Start Time

for Backlight

activated by

Nightlight

Stop Time for

Backlight

activated by

Nightlight

IMPORTANT When you press and hold ALARM for 2

seconds to enter the Setting Mode you need to make

sure you are in the correct alarm display (see above

for reference).

SETTING THE ALARM

To set the alarm:

1. Press and hold the ALARM button for 2 seconds

when the selected alarm is displayed. The hours

will flash.

2. Enter the values by pressing or .

3. Confirm the entry by pressing the ALARM button.

4. The minutes will flash.

5. Repeat (2) and (3) to finish the setting. The alarm

will be activated automatically and the alarm icon

will appear on the display.

ACTIVATING / DEACTIVATING THE ALARM

To activate or deactivate the alarm:

1. Press the ALARM button.

2. Press the or button. When the alarm icon

appears on the display, the alarm is activated.

When the alarm icon does not appear on the display,

the alarm is deactivated.

ALARM SOUND

When activated, the alarm icon flashes, the backlight

will come on for 8 seconds and a beeping noise starts

quietly. The alarm gradually becomes louder until it

crescendos at 2 minutes.

TURNING THE ALARM SOUND OFF

To turn the alarm sound off and automatically activate

it again after 24 hours, press any of the following

buttons:

zMODE

zALARM

zUP

zDOWN

CLOCK BACKLIGHT

TO MANUALLY TURN THE BACKLIGHT ON

Press the LIGHT button on the clock, and the backlight

will turn on for 5 seconds.

TO ACTIVATE THE BACKLIGHT USING THE MOTION

/ LIGHT SENSOR

The clock backlight can be set up for a certain period

of time to turn on for 10 seconds when a movement

is detected in a dark room. Simply:

1. Press the ALARM button twice to get to the

Backlight Setting Display.

6. The Motion Start Hour will flash.

7. Repeat (4) and (5).

8. Continue the above procedures to set the Motion

Stop Hour.

2. Press the or buttons to change the setting to

either:

NIGHTLIGHT

ACTIVATING THE NIGHTLIGHT USING THE MODE

BUTTON

The nightlight can be activated independently to the

clock unit. You can set the nightlight to the following

options:

1. Nightlight On - When the room is dark the nightlight

will stay on.

zSlide the Mode button to On.

2. Nightlight Off - The nightlight stays off all the

time.

zSlide the Mode button to Off.

3. Nightlight Auto - When the nightlight detects motion

in a dark room, it will light up for 20 seconds.

zSlide the Mode button to Auto.

Enabled OR Disabled

9. When the icon appears on the display, the

function is activated. When the icon does not

appear on the display, the function is deactivated.

NOTE Light ON – Press to turn the clock backlight

ON for 10 seconds remotely.

NOTE The nightlight Clock Control switch must be

set to On for this function to work.

TO ENABLE / DISABLE THE REMOTE-CONTROLLED

CLOCK BACKLIGHT

1. Press the ALARM button twice to reach the display

below.

2. Press and hold the ALARM button for 2 seconds to

enter the Backlight Setting Mode.

3. The Code setting will flash.

4. Press the or buttons to change the setting.

(Make sure you select the Code setting that

matches the Code switch in the back of the

nightlight).

5. Confirm the entry by pressing the ALARM button.

NOTE When the motion sensor on the nightlight is

turned on, it needs approximately 2 minutes to warm

up before giving a response.

ACTIVATING THE CLOCK BACKLIGHT USING THE

CONTROL BUTTON

You can control the backlight of the clock through the

nightlight. You can set the backlight to the following

options:

1. Control On - The clock backlight is controlled by

the activation of the nightlight.

zSlide the Clock Control switch to On.

2. Control Off - The nightlight does not control the

clock backlight.

zSlide the Clock Control switch to Off.

NOTE See the Clock Backlight section, which shows

you how to set the nightlight sensors to be activated

at times specified by you.

THE CODE SWITCH

The Code switch on the nightlight must be set to the

same setting as the Code setting on the clock. The

Code allows the nightlight to recognize the clock’s

settings.

THE CHANNEL SWITCH

Up to 2 nightlights can be linked to 1 wall clock. (An

additional nightlight can be purchased separately.) By

setting 1 nightlight to Channel 1 and the other to

Channel 2, the clock display can tell you which sensor

has been activated by flashing “ch. 1” or “ch.2” on the

display.

RESET BUTTON

Insert a thin blunt instrument into the hole below Reset

to return to the default settings.

The default settings are:

Clock Time: 12.00 PM

Date: 1st January 2004

Time Offset: +0

Alarm Time: 6.00 AM

Daily Alarm: Disabled

Motion Alarm Start Time: 12.00 AM

Motion Alarm Stop Time: 6.00 AM

Motion Alarm: Disabled

UK Display Setting: 12hr, DD / MM,°C

EU Display Setting: 24hr, DD / MM,°C

+ LIGHT - ROTARY KNOB

The light sensor’s level of sensitivity can be adjusted.

Turn the Light rotary knob towards + to make it more

sensitive to light or - to make it less sensitive to light.

TECHNICAL SPECIFICATIONS

TYPE DESCRIPTION

Main Unit Dimensions

L x W x H 297 x 25 x 165 mm (11.69 x 0.98 x 6.5 inches)

Weight (without battery) 622 g (1.37 lbs)

Remote Unit Dimensions

L x W x H 88 x 43 x 112 mm (3.46 x 1.69 x 4.41 inches)

Weight (without battery) 140 g (0.31 lbs)

Temperature

Unit °C / °F

Operating Range 0°C to +50°C (32°F to +122°F)

Indoor Range -5°C to +50°C (23°F to +122°F)

Resolution 0.1°C (0.2°F)

Main Unit RF

RF Clock Frequency System DCF77 (EU) or MSF60 (UK)

RF Clock Synchronization Auto or disabled

RF Frequency 433 MHz

Reception Range 30 metres (98 feet) with no obstructions

Synchronization Auto or disabled

Remote Unit

Motion Sensor Coverage Distance Approx. 5 metres

Motion Sensor Warm-Up Time Approx. 2 minutes after power-on

Main Unit Display

Clock HH:MM:SS

HH:MM:Day of Week

HH:MM:Time Zone Offset

Hour Format 12hr AM / PM (MSF Format)

24hr (DCF Format)

Calendar DD / MM or MM / DD, user selectable. Weekday

selection in 5 languages (E, D, F, I, S)

Alarm 2-minute crescendo

Power

Main Unit 4 x UM-3 (AA) 1.5V batteries

Remote Unit 3 x UM-3 (AA) 1.5V batteries or 4.5V AC adaptor

NOTE Design and specifications are subject to change without notice.

NOTE It is recommended that you use alkaline batteries with this product for longer performance.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oregon Scientific Uhr Handbücher

Oregon Scientific

Oregon Scientific RM968 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR601 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BARM839 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR331ES Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM303P Bedienungsanleitung

Oregon Scientific

Oregon Scientific EW103 Bedienungsanleitung

Oregon Scientific

Oregon Scientific TW331 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM998PS Bedienungsanleitung

Oregon Scientific

Oregon Scientific DP200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR339PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA G Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM383PA - MANUAL 2 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR391P Bedienungsanleitung

Oregon Scientific

Oregon Scientific JM828CD Bedienungsanleitung

Oregon Scientific

Oregon Scientific JMR838WFA Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM802 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA G RRM222PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific JMR818WF Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR939P Bedienungsanleitung

Oregon Scientific

Oregon Scientific PROJI BAR369P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA320PN Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM602 Bedienungsanleitung

Oregon Scientific

Oregon Scientific TimeSphere RM382P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR132HG Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung

LG LEC-005 Bedienungsanleitung