Panasonic AK-HBA3500G Bedienungsanleitung

Before operating this product, please read the instructions carefully and save this manual for future use.

Operating Instructions

Buildup Adapter

Model No. AK-HBA3500G

FRANÇAIS DEUTSCH ENGLISH

ITALIANO

ESPAÑOL

РУССКИЙ

日本語

VQTB0295

1 (E)

For your safety

indicates safety information.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD AND ANNOYING INTERFERENCE, USE

THE RECOMMENDED ACCESSORIES ONLY.

WARNING:

• TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

• TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD, KEEP THIS EQUIPMENT AWAY FROM

ALL LIQUIDS. USE AND STORE ONLY IN

LOCATIONS WHICH ARE NOT EXPOSED TO THE

RISK OF DRIPPING OR SPLASHING LIQUIDS,

AND DO NOT PLACE ANY LIQUID CONTAINERS

ON TOP OF THE EQUIPMENT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (service) instructions in the

literature accompanying the appliance.

ENGLISH VERSION

2 (E)

ENGLISH

Contents

Overview ............................................................................ 2

Accessories ...................................................................... 2

Operating precautions ..................................................... 2

Parts and their functions ................................................. 3

Mounting ........................................................................... 4

Mounting the buildup adapter ..................................... 4

Mounting the viewfinder .............................................. 6

Detaching the viewfinder ............................................. 7

Detaching the buildup adapter .................................... 8

Connections ...................................................................... 9

Troubleshooting ................................................................ 9

Appearance ..................................................................... 10

Specifications ................................................................. 11

Overview

This buildup adapter is for use with the buildup unit (AK-HBU3500) and viewﬁnder (AK-HVF985B).

The viewﬁnder (AK-HVF985B) can be mounted by mounting the buildup adapter onto the buildup unit.

Accessories

Operating Instructions ......................... 1

Lock base .............................................. 1

Operating precautions

Be absolutely sure to supply the buildup adapter’s

power from the buildup unit.

Handle the unit carefully.

Dropping the unit or subjecting it to strong impact may

cause malfunctioning and/or accidents.

Operate the unit within a temperature range of 14 °F

(–10 °C) to 113 °F (+45 °C).

Be absolutely sure to turn off the power before

connecting this unit to the buildup unit.

When using the unit in windy or snowy conditions or

at the beach or at the waterfront, cover it with the rain

cover (optional accessory) or protect it in some other

way in order to prevent it from getting wet and stop

water from seeping inside.

Install the unit at a distance of at least 1 meter from

the monitor.

Maintenance

Disconnect the power plug, and wipe the unit with a dry

cloth. To remove stubborn dirt, soak a cloth in diluted

kitchen detergent and wring it out well, and then wipe the

unit gently.

Avoid using benzine, paint thinners and other volatile

fluids.

If a chemical cleaning cloth is to be used, carefully

read through the precautions for its use.

Caution

3 (E)

Parts and their functions

1Release levers

These levers are used to release the viewfinder.

2Pan base support

This is the surface on which the viewfinder is mounted.

3Pan lock lever

This is used to secure the horizontal rotation of the pan

base support.

4VF connector

This is the viewfinder’s interface connector.

For details on the specifications of this connector, refer to

the operating instructions of the AK-HVF985B viewfinder.

5Lock knob

The knob is threaded inside. Tighten it securely when the

adapter has been mounted on the buildup unit.

(Refer to page 4.)

6Buildup unit I/F connector

This is the interface connector of the buildup unit.

For details on the specifications of this connector, refer

to the operating instructions of the AK-HBU3500 buildup

unit.

4 (E)

ENGLISH

Mounting

Mounting the buildup adapter

When the buildup unit has been mounted on a tripod, secure the pan lock lever and tilt lock lever of the

tripod. If these levers are not secured, the center of gravity will shift, causing the tripod to topple over and

possibly resulting in injury.

Note

1With the accessory lock base positioned in the direction shown in the figure, mount it securely using

the four screws which are incorporated into the lock base.

If the screws for the lock base are not tightened up sufficiently, the buildup adapter may teeter or even fall

off after it has been mounted onto this base, possibly resulting in injury.

Note

2Remove the connector cap.

Keep this in a safe place to ensure that it will not be lost or misplaced.

3Align the guide pins (large and small) to mount the buildup adapter, and turn the lock knob in the

direction of the arrow and tighten it securely.

If the lock knob is not tightened up sufficiently, the buildup adapter may teeter or even fall off after it has

been mounted, possibly resulting in injury.

Note

Lock base (supplied) Connector cap Buildup adapter

Guide pin (large)

Guide pin (small)

Lock knob

5 (E)

Mounting

4Turn the buildup adapter in the direction of the arrow to secure it to the lock base.

Check that it has clicked into position and is secured firmly.

To ensure safety, check that the buildup adapter is secured firmly by attempting to move it backward or

forward.

Note

5Slide the safety lever in the direction of the arrow.

Now check that its red mark is visible through the openings.

To ensure safety, check that it will not reach the back even when the lock release lever is pressed.

Safety lever

Lock release leverOpenings

6 (E)

ENGLISH

Mounting

Mounting the viewfinder

When the buildup unit has been mounted on a tripod, secure the pan lock lever and tilt lock lever of the

tripod. If these levers are not secured, the center of gravity will shift, causing the tripod to topple over and

possibly resulting in injury.

Note

1Place the viewfinder on its pan base in such a way that the V-shaped edge of the pan base fits into the

V-shaped groove in the pan base support and that the protruding area of the pan base is positioned as

shown in the figure.

V-shaped edge

Pan base

Pan base support

Viewfinder connector

Protruding area

2Push the grip away from you to firmly secure the viewfinder to the pan base support.

The camera and viewfinder are now connected through the adapter’s viewfinder connector.

To ensure safety, try pulling the grip toward you, and check that the viewfinder is secured firmly.

Grip

7 (E)

Mounting

Detaching the viewfinder

When the buildup unit has been mounted on a tripod, secure the pan lock lever and tilt lock lever of the

tripod. If these levers are not secured, the center of gravity will shift, causing the tripod to topple over and

possibly resulting in injury.

Note

1Detach the viewfinder by first turning the release levers in the directions of arrows 1and 2and then

lifting the viewfinder in the direction of arrow 3.

Release levers

8 (E)

ENGLISH

Mounting

Detaching the buildup adapter

1Slide the safety lever in the direction of arrow 1.

Check that the green mark is visible through the opening.

2Turn the buildup adapter in the direction of arrow 3while pressing the lock release lever in the

direction of arrow 2.

Safety lever

Lock release lever

Openings

3Turn the lock knob in the direction of arrow 4to disengage the mounting, and pull up the buildup

adapter in the direction of arrow 5.

Lock knob

4Attach the accessory connector cap to the buildup unit (arrow 6).

Connector cap

Failure to attach the connector cap may result in

electric shocks and/or trouble.

Note

9 (E)

Connections

Connect the buildup adapter as shown in the figure below.

Multi-format camera

AK-HC3500 Master Setup Unit

AK-MSU935

7˝ CRT

Viewfinder

AK-HVF985B

Remote operation panel

AK-HRP931/AK-HRP935

Camera Control Unit

AK-HCU935

ROP cable

Large lens

Buildup Unit

AK-HBU3500

Buildup Adapter

AK-HBA3500

8˝ LCD Viewfinder

AK-HVF931A

Troubleshooting

Symptom Cause and remedial action

The viewfinder does not work.

Check that the viewfinder connector is connected.

Check that the I/F connector of the buildup unit is connected.

Check that the power of the camera is on and that the viewfinder power switch

[VF POWER] of the buildup unit is at the ON position.

If the symptom persists, contact your dealer.

Inhaltsverzeichnis

Andere Panasonic Adapter Handbücher

Panasonic

Panasonic CF-AA Series Bedienungsanleitung

Panasonic

Panasonic CF-AA5713A Bedienungsanleitung

Panasonic

Panasonic BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor... Bedienungsanleitung

Panasonic

Panasonic TY-WL20A Bedienungsanleitung

Panasonic

Panasonic CF-AAV1601AW Bedienungsanleitung

Panasonic

Panasonic AXA1A100 Bedienungsanleitung

Panasonic

Panasonic AG-CA300G Bedienungsanleitung

Panasonic

Panasonic AW-PS300 Bedienungsanleitung

Panasonic

Panasonic CF-AA Series Bedienungsanleitung

Panasonic

Panasonic CYZAC50N Bedienungsanleitung

Panasonic

Panasonic CF-AA5713A Series Bedienungsanleitung

Panasonic

Panasonic CA-PANSC1U Bedienungsanleitung

Panasonic

Panasonic AW-PS301 Bedienungsanleitung

Panasonic

Panasonic BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor... Bedienungsanleitung

Panasonic

Panasonic DMW-DCC16 Bedienungsanleitung

Panasonic

Panasonic TYTAD20 Bedienungsanleitung

Panasonic

Panasonic AG-MYA30G - XLR Mic Adaptor Bedienungsanleitung

Panasonic

Panasonic BL-PA100KT Bedienungsanleitung

Panasonic

Panasonic WV-QT70 Bedienungsanleitung

Panasonic

Panasonic DY-WL5 Bedienungsanleitung

Panasonic

Panasonic AJ-CA900 Bedienungsanleitung

Panasonic

Panasonic DE-852D Bedienungsanleitung

Panasonic

Panasonic AW-AD500A Bedienungsanleitung

Panasonic

Panasonic DM0706SY0 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung