Panasonic F-PXV35M Bedienungsanleitung

PRODUCT FEATURES

F-PXV35M

FURTHER INFORMATION

FAQ

BACK COVER

TROUBLESHOOTING

SPECIFICATIONS

OPTIONAL ACCESSORIES

SETTING AND OPERATING REQUIREMENTS

SAFETY PRECAUTIONS

Thank you very much for purchasing this Panasonic product.

Please read these operating instructions carefully before operation and maintenance.

Also, be sure to read the “SAFETY PRECAUTIONS” section (P.2~4) before use.

Failure to comply with instructions could result in injury or property damage.

Make sure that the correct information is written on the warranty card, including the date of

purchase and the name of the distributor. Keep the warranty card in a safe place along with the

operating instructions for future reference.

Warranty card attached

Air Purifier

Model No.

This product is for indoor use only

OPERATING INSTRUCTIONS

CONTENTS

OPERATION

BACK COVER

OPERATION

MAIN PARTS IDENTIFICATION

POWER OFF/ON

AIR VOLUME·TURBO TIMER·SLEEP

SETUP

MAINTENANCE

WHEN IDLE FOR A LONG TIME

CLEANING METHOD

FILTER REPLACEMENT

2~4

6~7

5~6

7~8

8~10

CONFIRMATION

AND SETUP MAINTENANCE OTHER

INFORMATION

WARNING

CAUTIONWARNING

The safety precautions should be strictly followed in order to prevent injury or damage to properties.

Those things shown in this column indicate that

there is possibility of causing death or severe

injury.

Those things shown in this column indicate that

there is possibility of causing minor injury or

damage to properties.

The following symbols differentiate the levels of danger and injury that may result if the product is

not used correctly as instructed.

SAFETY PRECAUTIONS Please strictly follow

This product is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervi-

sion or instruction concerning use of the product by a person responsible for the safety.

Children should be supervised to ensure that they do not play with the product.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

Disconnect power supply before maintenance.

Do not pull the power cord

when carrying or storing the

product.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Do not damage the power cord

or power plug.

Do not cut, modify, excessive distort,

twist, squeeze the power cord, and do

not place it near heat sources, place

heavy weight on it, etc.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Do not insert your fingers, me-

tallic objects or others into the

air inlet, air outlet or gaps.

(Otherwise, you may be hurt by the

inner units with the possibility of

electric shock or injury.)

Do not let the product get wet.

Do not place cups, etc. on the

product.

(Otherwise, the product may

short circuit with the possibility

of fire or electric shock.)

Do not use power other than

the rated voltage.

(Otherwise, the power cord may over-

heat and induce fire.)

Do not touch the power plug

with wet hands.

(Otherwise, electric shock

may occur.)

→

Do not disassemble or modify

the product.

(Otherwise, the product may catch

fire or malfunction, thus resulting in

fire or electric shock.)

Contact the dealer for repair.

This symbol indicates an action that

must not be performed.

This symbol indicates an action that

must be performed.

The following symbols are used to indicate the type of instructions that need to be followed.

(The symbols given below are examples)

Please strictly follow

CAUTION

WARNING

SAFETY PRECAUTIONS

→

Clean the power plug

regularly.

(If dust is found on the power plug,

insulation maybe damaged by humidity

and fire may occur.)

Disconnect the power plug and wipe it

with dry cloth.

When the product will not be used

for a long period, disconnect the power

plug.

Insert the power plug

completely.

(If the power plug is not fully inserted,

the power cord may be overheated,

thus resulting in fire or electric shock.)

Do not use damaged power plug or

loose power socket.

In case of any abnormality or

malfunction, stop using the

product immediately and

disconnect the power plug.

(Otherwise, electric shock, fire or

smoke may occur.)

<Examples of abnormality/

malfunction

The product stops operating when

moving the power cord.

If any switches do not work.

If the circuit breaker is tripped or when

fuse blows.

If the power cord or power plug

becomes abnormally hot.

If you notice a burning smell or an

abnormal sound or vibration.

If there is any other abnormalities or

malfunction.

Please stop using the product immedi-

ately and disconnect the power plug,

and contact the dealer to check and

repair.

→

Do not clean the product with

gasoline or other volatile mix-

ture solvents, and avoid con-

tacting with spray insecticides.

(Otherwise, the product may crack or

short circuit with the possibility of injury,

fire or electric shock.)

Do not operate this product in

places where indoor fumigation

type insecticides are being used.

(Chemical residue may build up inside

the product and discharge from the air

outlet, and cause damage to health.)

Ventilate the room with fresh air thor-

oughly after using insecticides before

operating the product.

Do not sit on or lean against

this product.

(Otherwise, the product may fall over

and injury may occur or damage the

product.)

Families with children should pay more

attention.

Do not place the product in

the following places.

Incline and unstable place.

(Otherwise, the product may fall over

and injury may occur or damage the

product.)

Where the temperature or humidity is

extremely high, or watery area, such as

bathroom.

(Otherwise, current may leak with the

possibility of fire or electric shock.)

Where oil fume is emitted, such as

in kitchens.

(Otherwise, the product may crack and

injury may occur.)

Where oil or inflammable gas is present

and may be leaked.

(Otherwise, a fire may occur due to

ignition in the product.)

Where the air outlet faces animals or

plants directly.

(Otherwise, it may cause discomfort to

the animals and dry out the plant.)

CONFIRMATION

AND SETUP

Please strictly follow

SETTING AND OPERATING REQUIREMENTS

→

Do not set the product in the

following places.

Where the product will be exposed directly to

sunlight, outlet of air conditioner or heat, etc.

(Otherwise, deformation, degeneration,

discolor or malfunction may be occurred.)

Near equipment such as TV and radio.

(Otherwise, visual disturbances or noises may

be caused.)

Keep the product 1 m or above away from such

devices.

Do not use the same power socket

with TV, radio, etc.

(Otherwise, visual disturbances or noises may

be caused.)

In this case, insert the power plug into another

power socket.

Area that can enhance the effectiveness!

Way to against PM2.5 and indoor dust, etc.

Way to circulate air more effectively.

Place the product with its left, right and top about 30 cm or more away from walls, furniture or

curtains, etc. Otherwise, the pollutants are difficult to be cleared.

To ensure effectiveness of this product, keep its back at least 1 cm away from the wall.

If the product is used in the same

place for a long period.

It may result in dirty surrounding walls or

floor. We recommend that you move the

product away from where it is placed when

maintaining it.

We recommend you to place the product on flat floor in

the room.

Do not place obstacles on the

product air inlet and outlet.

(Otherwise it may affect product performance.)

Do not place any object on the

product.

(Otherwise, an operation error or malfunction

may be caused.)

CAUTION

SAFETY PRECAUTIONS

Do not place the product near

combustible materials such as

lighted cigarette, incense, etc.

(Otherwise, these may be absorbed

into the product with possibility of fire.)

When carrying the product,

please hold the left and right

handles, but not the front

panel.

(Otherwise, the product

may fall off, injury may

occur.)

When disconnecting the power

plug, hold the power plug

instead of the power cord.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Keep the room well-ventilated

when using the product

together with a burner.

(Otherwise, carbon monoxide poisoning

may occur.)

This product cannot remove carbon

monoxide.

Air outlet (nanoeTM X emission outlet)

Control panel

Front

panel

Air inlet

(both sides)

Air inlet

(front)

Odor sensor

Power cord

Power plug

Handle

(left and right)

Odor sensor

Odor senor can detect odor such as smoke, etc.

The sensitivity of sensor can be adjusted. (P.10)

MAIN PARTS IDENTIFICATION

Back

Front

PRODUCT FEATURES

nanoeTM X are particulate ions containing hydroxyl radicals whose amount is 10 times that

of nanoeTM.

The so-called nanoeTM X are charged water purification particles

generated by applying high voltage to separate water molecules.

4. More hydroxyl radicals (up to 4,800 billion of radicals are generated per second).

5. Weak acidity (with weak acidity features close to that of hair and skin).

About nanoeTM X

Note: nanoeTM and the nanoeTM mark are trademarks of Panasonic Holdings Corporation.

nanoeTM X features: high moisture content, small particles,

high stability, etc.

1. High moisture content (the moisture content is 1,000 times the

moisture content of ordinary anions).

2. Small particles (about 5 nm - 20 nm (nanometers) in size, able to penetrate deep into the fiber

and stratum corneum).

3. High stability (6 times more stable than a common ion, covering a distance of 10 m

or above).

All of the above features have been tested by SGS-CSTC Standards Technical

Services Co., Ltd.

CONFIRMATION

AND SETUP

“House Dust Catcher” and “nanoeTM X”

give you clean and fresh air.

House Dust Catcher completely cleaning dust from the air near

the floor

Compact and stylish design

Equipped with nanoeTM X technology

Remove the front panel.

Remove the filters (2 types).

Remove the deodorizing

filter from the poly bag.

Please don’t remove the black net

of deodorizing filter.

Poly bag

Remove the deodorizing filter

from the poly bag.

Notice

Front panel

Pull it forward

with both hands

Deodorizing filter

(wrapped in a

black net)

HEPA composite filter

Pull it forward

with both hands

Before startup Install filters

Make sure to read page 2~4 before

setting up the product.

Fill in the label

with the first

date of use.

Notice

Control panel

nanoeTM X indicator

Clean sign

Show the air pollution levels detected by odor

sensor. The clean sign can be turned off. (P.11)

The indicator lights on indicates nanoeTM X is

being generated. nanoeTM X will be generated

in all operation modes except you switch off

it. ( P.10)

nanoeTM Xindicator

Indicates clean

Indicates slight dirty

Indicates dirty

Filter

replacement

indicator

Air volume

button

Air volume

indicator

Sleep

indicator

Sleep

button

Turbo timer

indicator

Turbo timer

button

Power Off/On

button

Clean sign

MAIN PARTS IDENTIFICATION

SETUP

Replacement filter

Part No. F- X P

Date installed:

Replacement filter

Part No. F- XF X

Date installed:

HEPA composite filter replacement

Deodorizing filter replacement

(About once every 3 years)

Replace a new one when the deodorizing

function becomes less effective.

(About once every 3 years)

OPERATION

Turn on or off the product.

Power Off/On

Air volume buttonSleep button Turbo timer button Power Off/On button

3. Press the button again, the product stops operating.

Press the button to operate. (Air volume indicator lights on)

1. When using for the first time, operation will begin with the air volume under “Auto”.

2. Other than the above situations, operation will begin with the air volume from the last time it

was stopped.

To operate product within 2 minutes after the power plug is inserted, the indicator of air volume

under “Auto” will blink about 2 minutes, what it indicates the odor sensor is in the standby mode.

SETUP

Install filters Power-on

Be sure to install front panel before use.

Install the filters (2 types) and front

panel.

Connect the

power plug.

Install deodorizing filter.

(There is no distinction between

inside and outside, upper and lower)

Install HEPA composite filter.

(There is distinction between inside and outside,

no distinction between upper and lower)

Install front panel.

When inserting the power plug,

as the odor sensor uses the degree

of cleanliness at this time as the

standard, we recommend that you

plug it in when the air is fresh

(such as when there is no cigarette

smoke).(The standard of the odor

sensor automatically updates itself

according to the degree of the

indoor cleanliness.)

Press button, then the

clean sign blinks for about 5

seconds.

Notice

Projections of the product (2 places)

With the black side (front side) outside,

and align it with the projections of the

product.

Fit the clutch into the

indentation (3 places)

of the product.

Push in the protrusion into

holes (2 places) of product

and press properly.

CONFIRMATION

AND SETUP

OPERATION

If power failure occurs when product is operating, the product will restart automatically when power

on again, and operate in the mode when power failure.

Notice

(Indicator lights on) Press the button again to deactivate sleeping operation.

(The indicator turns off.)

Sleeping operation.

When this button is pressed, the clean sign will turn off and operate with

low air volume.

After 8 hours, the sleeping operation ends and the product stops operating.

Sleep

(Indicator lights on)

Purify air quickly.

Purify air in medium speed.

Purify air quietly in low speed.

Select appropriate air volume for purifying air.

The indicator will be changed sequentially as figure below.

Automatically adjust the air volume according to the air pollution

detected by sensor, and use appropriate air volume to purify air.

Air volume

(Indicator lights on)

Press the button again to deactivate turbo operation. (The indicator turns off.)

Turbo operation.

Press this button to begin turbo operation.

During turbo operation, the clean sign will flash in blue and red. After 10 minutes, the turbo

operation ends and will return to the previous operation mode.

Turbo Timer

MAINTENANCE

Do not use the detergents shown below.

For installation and removal methods of front

panel and filters, please read P.6~7.

When cleaning, do not leave the removed parts

unattended.

(Otherwise, it may cause tripping or damage.)

Do not operate the product when the

HEPA composite filter is removed.

(Dust will be inhaled into product inner parts,

and causes the product breakdown. The HEPA

composite filter cannot function while it is

removed.)

Do not operate the product when the

deodorizing filter is removed.

(The deodorizing filter cannot function

while it is removed.)

When using chemically treated cloth,

be sure to follow the instructions carefully.

Make sure to disconnect the power plug before cleaning the product.

(Otherwise, the product might operate with the possibility of electric shock or injury.)

WARNING

Notice

Polish

Alkaline

detergent

Thinner

Bleach

Kerosene

Alcohol

MAINTENANCE

Notice

If the product is used in a room (especially hotel) with strong odor such as aromatic smell, cigarette

smoke or barbecue smell, these odors may adhere to the filter. When the adsorption capacity of filter

reaches saturation, odor will also be blown out again with the wind because of excess adsorption.

When there is above situation, please clean the HEPA composite filter. If the situation persists, please

replace the HEPA composite filter and deodorizing filter, even if the filter replacement indicator is off.

In addition, if often used in a room with strong odor, please open the windows to ventilate the room

regularly.

The filter which needs to exchange cannot be used again even it is cleaned, please dispose the

used filter as non-flammable garbage.

Filter replacement

After replacement, please connect power plug, then press button for about 3 seconds

until the filter replacement indicator turns off, then the reset is completed.

Fill in installation date on the label attached with filter, then stick it on product to cover the old

date. (P.6)

When the product inhales the smoke of six

cigarettes every day. (Japan Electrical

Manufacturers’ Association JEM1467)

Conditions

When the filter replacement indicator lights

on. (About once every 3 years)

Replacement

period

(Optional accessories: back cover)

HEPA composite filter Deodorizing filter

Filter replacement period may be

shorten, depending on the environ-

ment (such as where smoking is

frequent).

Please replace it when ineffective.

※※

Cleaning method

Deodorizing filter

When there is dust around the deodorizing

filter, remove the dust with a vacuum

cleaner, etc.

Do not wash the filter with water.

Clean the black side (front side) with

a vacuum cleaner, etc.

HEPA composite filter

< about once every 2 weeks >

Dusting brush nozzle

or gap suction nozzle

Lay with newspapers, etc

to avoid dust messing floor.

Do not wash the

filter with water.

Please do not punch too much, otherwise

the filter may be damaged.

Maintenance is unnecessary for the white

side (back side).

Wipe off any dust and dirt using

a well wrung-out cloth

Body and front panel

< about once a month >

Do not wipe it with a hard cloth or hardly.

Otherwise, the surface may be damaged.

Wipe the power plug with a dry cloth.

MAINTENANCE

FURTHER INFORMATION

About HEPA composite filter

Super Allergy-buster: inhibits the activity of allergic substances (pollen, dead mites and feces).

The HEPA composite filter which with the Bio-sterilization and Super Allergy-buster can inhibit

allergens (pollen, dead mites and feces), bacteria, mold.

The HEPA composite filter might emit unique and harmless smell of “Green Tea Catechin”,

”Bio-sterilization” and “Super Allergy-buster”.

Testing authority: Osaka Municipal Technical Research Institute

Test method: check the decrease of refined house dust mite allergen, by using enzyme immune

measuring method.

Inhibiting method: contact with Super Allergy-buster

Target: allergens trapped by the filter (mites, pollen)

Test result: inhibited 99% and above. (Daikou research report No. 2127)

When idle for a long time

Disconnect power after turning off the product. (The product still consumes power even at rest.)

Maintain the product as usual.

Put the product into poly bag and carton, and keep it in a dry place. (If you overturn it or keep it

flat, product malfunctions may occur.)

Conditions for nanoeTM X generation

nanoeTM X is generated by using the air in the room. Therefore, due to the differences in

temperature and humidity nanoeTM X may not be generated stably.

When nanoeTM X is generated, small amount of ozone will be released. However, the quantity will

be far less than the level in natural environment such as forest, and not be harmful to human beings.

About nanoeTM X

During operation, press and buttons at the same time for about 3 seconds

(nanoeTM X indicator lights off). Press the buttons for about 3 seconds again to restart the nanoeTM X.

(nanoeTM X cannot be set during product stops operating.)

nanoeTM X can be switched off.

Room temperature: about 5 ℃～35 ℃(dew-point temperature: 2 ℃or above)

Relative humidity: about 30%～85%

MAINTENANCE

The sensor can detect the pollution of the air, and show the pollution level by indicator. The

product can optimize the air volume automatically in auto operation according to the air quality.

About odor sensor

Sensing scope

Odor sensor Odor from cigarettes, incense, cooking, pets

Cosmetics, alcohol, sprays, etc.

Humidity (water vapor), oil

The wind generated when a door

is opened or closed, or sudden

temperature changes

May detect

Sensor

Stop operating the product, then press and buttons at the same time for

about 3 seconds. The air volume indicator will light on sequentially.

The sensitivity of the sensor can be adjusted. (The default setting is “medium sensitivity” .)

Please release the buttons, when the sensitivity is set as required.

Medium sensitivity High sensitivity Low sensitivity

The sensor’s operation may vary depending on the indoor airflow condition if a heater is placed

near the product in a room.

The sensor is not designed to detect bacteria and viruses.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Luftreiniger Handbücher

Panasonic

Panasonic F-VXV70H Bedienungsanleitung

Panasonic

Panasonic EH-366 Bedienungsanleitung

Panasonic

Panasonic F-PXM55A Bedienungsanleitung

Panasonic

Panasonic EH3012 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic F-PXV35H Bedienungsanleitung

Panasonic

Panasonic F-PXM55A Bedienungsanleitung

Panasonic

Panasonic F-GMG01H Bedienungsanleitung

Panasonic

Panasonic F-PXT70H Bedienungsanleitung

Panasonic

Panasonic FP15JU2 Bedienungsanleitung

Panasonic

Panasonic nanoeX F-GPT01A Bedienungsanleitung

Panasonic

Panasonic F-PXJ30A Bedienungsanleitung

Panasonic

Panasonic F-PZT175H Bedienungsanleitung

Panasonic

Panasonic F-PXL45H Bedienungsanleitung

Panasonic

Panasonic F-PXU70A Bedienungsanleitung

Panasonic

Panasonic F-VXM35H Bedienungsanleitung

Panasonic

Panasonic F-VXF70A Bedienungsanleitung

Panasonic

Panasonic F-VR901 Bedienungsanleitung

Panasonic

Panasonic F-VXM35A Bedienungsanleitung

Panasonic

Panasonic F-P16X8C-ES Bedienungsanleitung

Panasonic

Panasonic F-P04DXZ Bedienungsanleitung

Panasonic

Panasonic EH-366 Bedienungsanleitung

Panasonic

Panasonic EH3015 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic WhisperAir Repair FV-01VCN1 Bedienungsanleitung

Panasonic

Panasonic EH3020 - AIR PURIFIER-PHCC Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung