Panasonic Nanoe X F-PXU70M Bedienungsanleitung

F-PXU70MOPERATING INSTRUCTIONS

Air Purifier

Model No.

This product is for indoor use only

4~5

6~7

FURTHER INFORMATION

FAQ

BACK COVER

TROUBLESHOOTING

SPECIFICATIONS

OPTIONAL ACCESSORIES

SETTING AND OPERATING REQUIREMENTS

PRODUCT FEATURES

SAFETY PRECAUTIONS

CONTENTS

OPERATION

MAIN PARTS IDENTIFICATION

POWER OFF/ON·AIR VOLUME

SETUP

MAINTENANCE

WHEN IDLE FOR A LONG TIME

CLEANING METHOD

FILTER REPLACEMENT

2~4

8~9

10~11

11~13

CHILD LOCK·nanoeTM X

OPERATIONCONFIRMATION

AND SETUP

MAINTENANCE OTHER

INFORMATION

Thank you very much for purchasing this Panasonic product.

Please read these operating instructions carefully before operation and maintenance.

Also, be sure to read the “SAFETY PRECAUTIONS” section (P.2~4) before use.

Failure to comply with instructions could result in injury or property damage.

Make sure that the correct information is written on the warranty card, including the date of

purchase and the name of the distributor. Keep the warranty card in a safe place along with the

operating instructions for future reference.

Warranty card attached (only for Australia)

2SAFETY PRECAUTIONS Please strictly follow

This product is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervi-

sion or instruction concerning use of the product by a person responsible for the safety.

Children should be supervised to ensure that they do not play with the product.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

Disconnect power supply before maintenance.

The safety precautions should be strictly followed in order to prevent injury or damage to properties.

The following symbols differentiate the levels of danger or injury that may result if the product is

not used correctly as instructed.

CAUTIONWARNING

This symbol indicates an action that

must not be performed.

This symbol indicates an action that

must be performed.

The following symbols are used to indicate the type of instructions that need to be followed.

(The symbols given below are examples)

Those things shown in this column indicate

that there is possibility of causing death or

severe injury.

Those things shown in this column indicate

that there is possibility of causing minor injury

or damage to properties.

WARNING

Do not pull the power cord

when carrying or storing the

product.

(Otherwise, the power cord may be

damaged with the possibility of fire

or electric shock.)

(Otherwise, the power cord may be

damaged with the possibility of fire

or electric shock.)

Do not damage the power

cord or power plug.

Do not cut, modify, excessive distort,

twist, squeeze the power cord, and do

not place it near heat sources, place

heavy weight on it, etc.

Do not touch the power plug

with wet hands.

(Otherwise, electric shock

may occur.)

In case of any abnormality or

malfunction, stop using the

product immediately and

disconnect the power plug.

(Otherwise, electric shock, fire or

smoke may occur.)

<Examples of abnormality/

malfunction>

The product stops operating when

moving the power cord.

If any switches do not work.

If the circuit breaker is tripped or

when fuse blows.

If the power cord or power plug

becomes abnormally hot.

If you notice a burning smell or an

abnormal sound or vibration.

If there is any other abnormalities or

malfunction.

Please stop using the product

immediately and disconnect the

power plug, and contact the dealer

to check and repair.

→

Do not disassemble or modify

the product.

Contact the dealer for repair.

(Otherwise, the product may catch

fire or malfunction, thus resulting in

fire or electric shock.)

→

3SAFETY PRECAUTIONS Please strictly follow

WARNING

CAUTION

Clean the power plug

regularly.

(If dust is found on the power plug,

insulation maybe damaged by humidity

and fire may occur.)

Disconnect the power plug and wipe

it with dry cloth.

When the product will not be used

for a long period, disconnect the

power plug.

Insert the power plug

completely.

Do not use damaged power plug or

loosen power socket.

(If the power plug is not fully inserted,

the power cord may be overheated,

thus resulting in fire or electric shock.)

Do not use power other than

the rated voltage.

(Otherwise, the power cord may

overheat and induce fire.)

Do not insert your fingers, me-

tallic objects or others into the

air inlet, air outlet or gaps.

(Otherwise, you may be hurt by the

inner units with the possibility of

electric shock or injury.)

Do not let the product get

wet.

(Otherwise, the product may

short circuit with the possibility

of fire or electric shock.)

Do not place cups, etc. on

the product.

→

Do not place the product in

the following places.

Incline and unstable place.

(Otherwise, the product may fall over

and injury may occur or damage the

product.)

Where the temperature or humidity is

extremely high, or watery area, such

as bathroom.

(Otherwise, current may leak with the

possibility of fire or electric shock.)

Where oil fume is emitted, such as

in kitchens.

(Otherwise, the product may crack

and injury may occur.)

Where oil or inflammable gas is

present and may be leaked.

(Otherwise, a fire may occur due to

ignition in the product.)

Where the air outlet faces animals

or plants directly.

(Otherwise, it may cause discomfort

to animals and dry out plant.)

Do not sit on or lean against

this product.

(Otherwise, the product may fall over

and injury may occur or damage the

product.)

Families with children should pay

more attention.

Do not operate this product in

places where indoor fumiga-

tion type insecticides are being

used.

Ventilate the room with fresh air thor-

oughly after using insecticides before

operating the product.

(Chemical residue may build up inside

the product and discharge from the air

outlet, and cause damage to health.)

Do not place the product near

combustible materials such as

lighted cigarette, incense, etc.

(Otherwise, these may be absorbed

into the product with possibility of fire.)

CONFIRMATION

AND SETUP

4SAFETY PRECAUTIONS Please strictly follow

CAUTION

Do not clean the product with

gasoline or other volatile mix-

ture solvents, and avoid con-

tacting with spray insecticides.

(Otherwise, the product may crack or

short circuit with the possibility of

injury, fire or electric shock.)

SETTING AND OPERATING REQUIREMENTS

When disconnecting the

power plug, hold the power

plug instead of the power

cord.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Keep the room well-ventilated

when using the product

together with a burner.

(Otherwise, carbon monoxide

poisoning may occur.)

This product cannot remove carbon

monoxide.

When carrying the product.

Area that can enhance the effectiveness!

Way to against PM2.5 and indoor

dust, etc.

Since PM2.5 or dust is likely to float in the air

near the floor, we recommend you to put the

product on the flat floor in the room.

Way to circulate air more effectively.

Place the product with its left, right and top about 30 cm or more away from walls, furniture

or curtains, etc. Otherwise, the pollutants are difficult to be cleared.

To ensure effectiveness of this product, keep its back at least 30 cm away from the wall.

→

It may result in dirty surrounding walls

or floor. We recommend that you move the

product away from where it is placed when

maintenance it.

If the product is used in the same

place for a long period.

Do not set the product in the

following places.

Where the product will be exposed directly to

sunlight, outlet of air conditioner or heat, etc.

(Otherwise, deformation, degeneration,

discolor or malfunction may be occurred.)

Near equipment such as TV and radio.

(Otherwise, visual disturbances or noises

may be caused.)

Keep the product 1 m or above away

from such devices.

Do not place any object on the

product.

(Otherwise, the product may malfunction.)

Please hold the back handle

of product, but not the inlet

cover.

(Otherwise, it may break or

fall off, thus resulting in

injury.)

Do not place books, clothing

or any other objects at the air

outlet of the product.

(Otherwise, the air outlet may be

blocked, thus resulting in smoke and

fire.)

5→

SETTING AND OPERATING REQUIREMENTS

Do not place obstacles on the product

air inlet and outlet.

(Otherwise it may affect product performance.)

Do not use the same power socket

with TV, radio, etc.

Install the product in a place

without any obstacles on the left,

right, top and back of the product.

Do not place the product on an

unstable or uneven surface.

(Otherwise, visual disturbances or noises may

be caused.)

In this case, insert the power plug into another

power socket.

(Otherwise, it is difficult for the product to

inhale pollutants, or the airflow may be

blocked and cannot be discharged smoothly.)

(Otherwise, vibration may be caused.)

nanoeTM X are particulate ions containing hydroxyl radicals whose amount is 10 times that

of nanoeTM.

The so-called nanoeTM X are charged water purification particles

generated by applying high voltage to separate water molecules.

4. More hydroxyl radicals (up to 4,800 billion of radicals are generated per second).

5. Weak acidity (with weak acidity features close to that of hair and skin).

About nanoeTM X

Note: nanoeTM and the nanoeTM mark are trademarks of Panasonic Corporation.

nanoeTM X features: high moisture content, small particles,

high stability, etc.

1. High moisture content (the moisture content is 1,000 times

the moisture content of ordinary anions).

2. Small particles (about 5 nm - 20 nm (nanometers) in size, able to penetrate deep into the fiber

and stratum corneum).

3. High stability (6 times more stable than a common ion, covering a distance of 10 m

or above).

PRODUCT FEATURES

All of the above features have been tested by SGS-CSTC Standards Technical

Services Co., Ltd.

With the nanoeTM X technology

The gas pollution level display keeps you updated with the indoor gas

pollution level.

The PM2.5 concentration reading display keeps you updated with the

indoor PM2.5 pollution level.

The efficient “HEPA composite filter” brings you

fresh and clean air

CONFIRMATION

AND SETUP

6MAIN PARTS IDENTIFICATION

Front Back

Control panel

LCD

Power cord

Power plug

Air outlet (nanoeTM X emission outlet)

nanoeTM X button (P.11)

Handle

Air inlet

PM2.5 sensor

Inlet cover

Gas sensor

Control panel

Power Off/On button (P.10)

Brightness sensor (P.14)Air volume button (P.10)

Child lock button (P.11)

(Picture is only for reference )

7MAIN PARTS IDENTIFICATION

Air volume display

nanoeTM X display

Filter replacement display

Note: PM2.5 concentrations display and gas pollution level display is for reference

only, according to differrent environment, the display will be different.

The PM2.5 concentrations display may differ when the product is turned on

for the first time or when the PM2.5 concentration reaches a stable level by

rapid purification.

PM2.5 concentrations display

Gas pollution level display

The nanoeTM X icon displays

indicates nanoeTM X is being generated.

nanoeTM X will be generated in all

operation modes except you switch off

it. (P.11)

Filter replacement display

Child lock display

Child lock display lights up, indicates

open child lock.

Filter replacement display lights up,

indicates replace filters. (P.13)

Child lock display

PM2.5 pollution source display

LCD

Air volume display

Auto/Low/Med/High

Two different types of products may show different measured PM2.5

concentrations due to air circulation even in the same space.

PM2.5 concentrations display

Display with figure

Where there are sofas, beds, carpets, detergents, fragrances, cosmetics, perfumes, insects,

pets, etc., or where it is humid or smoky.

Where it is close to construction sites, roadsides, factories, entrances and exits, windows,

ventilators, etc.

Where you cook or use a humidifier, spraying agent or other products that may generate

steam or fine dust.

The air flow around the PM2.5 sensor may cause a difference to the PM2.5 concentration.

The PM2.5 concentration may differ when the product is used in the following indoor places.

When the measured PM2.5 concentration

is equal to or higher than 600 µg/m3,

600 µg/m3is displayed.

When the measured PM2.5 concentration

is lower than 600 µg/m3, the measured

value is displayed.

Gas pollution level display:

Blue: Indicates clean

Purple: Indicates slight dirty

Red: Indicates dirty

Show the air pollution levels detected

by gas sensor.

CONFIRMATION

AND SETUP

開機準備安裝過濾網

8SETUP

Before startup Install filter

Fill in the label

with the first date

of use.

Make sure to read page 2~5

before startup.

Pull the air inlet cover out to remove it by holding the lower

part of its handle.

Lower part of the handle

For the first use, take the HEPA composite filter and the

deodorizing filter out together with the plastic bag.

Fix the main body in place with your hand when removing the

air inlet cover.

Notice

Remove the HEPA composite filter and

the deodorizing filter from the poly bag.

Deodorizing filter

(wrapped in a black net)

HEPA composite filter

Remove the filters (2 types) separately and horizontally.

Remove the HEPA composite filter and the deodorizing filter

from the poly bag.

Please don’t remove the black net of deodorizing filter.

Poly bag

39SETUP

Notice

Deodorizing filter

HEPA composite filter

Install filter Power-on

Install the filters (2 types) and inlet cover.

Install deodorizing filter.

(There is distinction between inside and outside, with

the handle side outward, no distinction between upper

and lower)

Install HEPA composite filter.

(There is distinction between inside and outside, with

the handle side outward, no distinction between upper

and lower)

Handle

Buckles (three)

Grooves (two)

Make sure to attach the

inlet cover before use.

Plug in the power

plug.

(Before plugging, wipe off

the water on the power

plug and your hands.)

Inlet cover

Install inlet cover.

Align the bottom of the air inlet cover with the

bottom grooves (two) of the rear cover and snap

it in, and then push them in the upper buckles

(three) of the air inlet cover.

With the handle

side outward

With the black

side outward

CONFIRMATION

AND SETUP

10OPERATION

Power Off/On button

Power Off/On

Turn on or off the product.

For the first operation, the product starts with the auto mode of air volume.

Press the button to turn the product on, LCD lights on, press the button

again to stop operating the product, LCD lights off.

Air volume button

Air volume

Select appropriate air volume for purifying air.

If press button, the product can stop operating; press this button again,

the product will operate with the mode from last setting.

Automatically adjust the air volume according

to the air pollution detected by sensor, and use

appropriate air volume to purify air.

Purify air quickly.

Purify air in medium speed.

Auto

Low

Med

High

Operate quietly in a low speed, but purify air

slowly.

When the product operates, press each time, air volume display on LCD

will be changed sequentially as figure below.

If power failure occurs when product is operating, the product will restart

automatically from the mode in which it was powered off when the power

supply is restored.

Notice

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Luftreiniger Handbücher

Panasonic

Panasonic F-VXR50M Bedienungsanleitung

Panasonic

Panasonic FP15JU2 Bedienungsanleitung

Panasonic

Panasonic EH3015 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic FP10HU1 Bedienungsanleitung

Panasonic

Panasonic F-VXV70H Bedienungsanleitung

Panasonic

Panasonic F-P04DXZ Bedienungsanleitung

Panasonic

Panasonic FP15HU2 Bedienungsanleitung

Panasonic

Panasonic Ziaino F-JPT70H Bedienungsanleitung

Panasonic

Panasonic F-PXM55M Bedienungsanleitung

Panasonic

Panasonic FP15HU1 Bedienungsanleitung

Panasonic

Panasonic FV-01VCN1 Bedienungsanleitung

Panasonic

Panasonic F-PXV55H Bedienungsanleitung

Panasonic

Panasonic FP10HU1 Bedienungsanleitung

Panasonic

Panasonic F-P15EHA Bedienungsanleitung

Panasonic

Panasonic HEPA Logic EH3012 Bedienungsanleitung

Panasonic

Panasonic F-PXL45H Bedienungsanleitung

Panasonic

Panasonic FP20HU1 Bedienungsanleitung

Panasonic

Panasonic FV-15CSD1 Bedienungsanleitung

Panasonic

Panasonic F-VXR70H Bedienungsanleitung

Panasonic

Panasonic F-PXT175H Bedienungsanleitung

Panasonic

Panasonic F-PXU70A Bedienungsanleitung

Panasonic

Panasonic F-PXU70A Bedienungsanleitung

Panasonic

Panasonic F-PXM55A Bedienungsanleitung

Panasonic

Panasonic F-VXK70A Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung