Panasonic KX-TCD951EB Bedienungsanleitung
Operating Instructions
Model No.
Digital Cordless Phone
KX-TCD951EB
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
0
WXYZ
9
RCL
PWR
PROG
RDL
INT'
OK
C
PLEASE READ BEFORE USE AND SAVE.
Charge the batteries for about 4 hours before initial use.
This equipment is not designed for making emergency
telephony calls when the power fails. Alternative arrangements
should be made for access to emergency services.
KX-TCD951EB(001~007) 99.6.28 4:46 PM Page 1
Important Information
2
APPROVED for connection to
telecommunication systems spec-
ified in the instructions for use
subject to the conditions set out
in them.
610110
Do not connect the AC adaptor to any
AC outlet other than the standard AC
230–240 V, 50 Hz.
• Outlet voltage DC1 8 V, 300 mA
Outlet voltage DC2 9 V, 200 mA
• The apparatus is approved for use
with the KX-TCA9E or KX-TCA11E
power supply.
• CAUTION: Do not remove cover.
Live parts inside.
This apparatus has been approved for
the use of the following facilities:
1) Storage of telephone numbers for
retrieval by a predetermined code
2) Last number redial
3) Simple telephone facility
4) PBX earth register recall (option)
PBX timed break register recall
5) MF signalling
6) LD signalling
7) Pause
8) 1 way paging
9) Call prohibition
10) Call restriction
11) Direct call
12) Intercom between handsets
13) Transferring a call from one handset to
another
14) Conference
15) Setting the call waiting tone
16) Accessing the base unit
Any other usage will invalidate the
approval of the apparatus if as a
result, it then ceases to conform to
the standards against which approval
was granted.
Ringer Equivalence Number (REN):
This relates to the performance of the
apparatus when used in combination
with other items of apparatus. It
enables the calculation of the
maximum number of items of
apparatus that may be connected
simultaneously to the line by
summing the REN values of each
item. A BT supplied instrument has a
REN value of 1 unless otherwise
marked.
A maximum REN value of 4 should
not be exceeded. The REN value of
this apparatus is 1.
Method of connection
This is connected to the exchange
line or PABX/PMBX (Private
Automatic/Manual Branch Exchange)
extension by the new standard British
Telecom plug and socket.
Arrangements for provision of this
type of termination can be made
through the nearest British Telecom
Sales Office. The apparatus may be
connected to the following types of
installation. The apparatus has been
approved for use under the following
conditions:
KX-TCD951EB(001~007) 99.6.28 4:46 PM Page 2
3
a) This apparatus may be used on
telecommunication systems
employing LD and MF signalling. It
is suitable for connection to a
direct exchange line on the PSTN
(Public Switched Telephone
Network) or via a compatible PBX
(Private Branch Exchange).
(Contact the supplier for an up to
date list of compatible PBX’s.)
b) This apparatus is not suitable as
an extension to a payphone or for
use on a party line with shared
service.
This cordless telephone has been
designed to operate on radio
frequencies which have been
assigned to the exclusive use of
cordless telephones. As the use of
cordless telephones becomes more
widespread users may experience a
reduction in the quality of service
obtainable from this apparatus.
Although this equipment can use
either loop disconnected or DTMF
signalling, only the performance of
the DTMF signalling is subject to
regulatory requirements for correct
operation. It is therefore strongly
recommended that the equipment is
set to use DTMF signalling for access
to public or private emergency
services. DTMF signalling also
provides faster call set up.
999 or 112 can be dialled on the
apparatus for the purposes of making
outgoing calls to the BT Emergency
(999 or 112) Service.
WARNING:
The apparatus may be unable to
make emergency 999 or 112
telephone calls, under certain
conditions, e.g.
• Radio interference caused by
another cordless telephone
operating on the same radio
frequency.
• The portable handset battery needs
recharging, or has failed.
• The portable handset cannot be
used while charging.
Any cases of difficulty should be
referred in the first instance to the
supplier of the apparatus.
NOTE:
If you experience any problems with
the normal use of your apparatus,
you should unplug it from the
telephone outlet and connect a
known working telephone in its place.
If the known working telephone still
gives problems, then please contact
the customer service department of
your PSTN operator. If it operates
properly, then the problem is likely to
be a fault in your apparatus. In this
case, contact your supplier for
advice. Your PSTN operator may
charge you if they attend a service
call that is not due to apparatus
supplied by them.
KX-TCD951EB(001~007) 99.6.28 4:46 PM Page 3
Before Initial Use
4
Thank you for purchasing your new Panasonic digital
cordless telephone.
For your future reference
Serial No. Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Included with this unit
AC Adaptor (p.10)
Part No.KX-TCA9E or
KX-TCA11E
one
one one
one three
Handset Cover (p.9)
Part No.PQKK10091Z1
Belt Clip (p.40)
Part No.PQKE10071Z1
one
Operating Instructions
Part No.PQQX12191Z
Telephone Line Cord (p.10)
Part No.PQJA87S Battery (p.9)
Part No.Panasonic P-03H
(BYD PQP25AAA)
KX-TCD951EB(001~007) 99.6.16 5:36 PM Page 4
5
For Best Performance
Battery Charge
Rechargeable Ni-Cd batteries power the handset.
Install the batteries (p.9) and charge them for
about 4 hours before initial use (p.11).
Base Unit Location
Calls are transmitted between the base unit and the handset using wireless radio waves.For
maximum distance and noise-free operation, the recommended base unit location is:
Away from electrical appliances such as a TV,
radio, personal computer or another telephone. In a HIGH and CENTRAL location with
no obstructions such as walls.
KX-TCD951EB(001~007) 99.6.16 5:36 PM Page 5
Contents
6
Making Calls ..................................16
Answering Calls ............................17
Speed Dialling ...............................18
Storing Phone Numbers
in Memory ....................................18
Dialling a Stored Number.............18
Special Features ...........................19
How to Use the Pause Feature
(For Analog PBX Line/Long
Distance Service Users) ..............19
Handset Locator...........................20
Temporary Tone Dialling (For
Rotary or Pulse Service Users) ...20
Setting the Key Lock ....................20
Using the Recall Feature..............21
Chapter 1
Preparation
Chapter 3
Advanced Operations (Special
Programming Features)
Location of Controls ......................8
Display .............................................9
Settings ............................................9
Installing the Batteries in the
Handset .........................................9
Connections ................................10
Battery Charge..............................11
Turning the Power ON..................12
Selecting the Dialling Mode..........13
Selecting the Handset Ringer
Volume/Pattern.............................14
Selecting the Base Unit
Ringer Volume..............................15
Summary of Programmable
Functions........................................22
Setting the Password....................23
Direct Call.......................................24
Setting the Direct Call Mode ........24
Dialling the Stored Number..........24
Call Prohibition..............................25
Call Restriction ..............................26
Other Programmable Settings......27
Setting the Key Tones ..................27
Setting the Range Warning
Alarm............................................27
Setting the Battery Low Alarm......27
Selecting the Talk Mode Display..28
Clearing the Settings
in Memory ......................................29
Chapter 2
Basic Operations
KX-TCD951EB(001~007) 99.6.16 5:36 PM Page 6
7
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5
Chapter 5
Useful Information
Chapter 4
Multi-Unit User Operations
For Optional Multi-Unit Users.......30
Operating More than One
Handset........................................30
Operating More than One Base
Unit...............................................30
Registration....................................31
Registering a Handset in the
Base Unit......................................31
Selecting the Base Unit Access ...32
Cancelling a Handset...................33
Selecting the Stand-by Mode
Display............................................34
Bell Selection.................................34
Paging/Intercom.............................36
Paging All Handsets from
the Base Unit................................36
Intercom between Handsets.........36
Transferring a Call from One
Handset to Another.......................37
Conference ..................................38
Setting the Call Waiting Tone.......38
Replacing the Batteries.................39
Using the Belt Clip .......................40
Before Requesting Help ...............41
Safety Instructions ........................44
Adding Another Phone..................45
Important Notice Concerning the
Correct Use and Charging of
Ni-Cd (Ni-MH) Batteries.................45
Term Definitions............................46
KX-TCD951EB(001~007) 99.6.16 5:36 PM Page 7
8
Location of Controls
Base unit
Handset
Charge Contacts (p. 11)
Page Button (p. 20, 31, 36) In Use Indicator ( ) (p. 20, 31)
Charge Indicator ( ) (p. 11)
Antenna
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
0
WXYZ
9
INT'
OK
OK
C
PWR
RCL
PROG
RDL
Display (p. 9)
Talk Button (p. 16, 17)
Program Button
(p. 13, 18, 20, 22)
Recall Button (p. 21)
Tone Button (p. 20)
Charge Contacts (p. 11)
Intercom Button
(p. 13, 22, 36)
OK Button (p. 14, 22)
Navigator Key F, G
(p. 14, 16, 17, 18, 22)
Redial/Pause Button
(p. 17, 19)
Power Button (p. 12)
INT
Cancel Button
(p. 16, 17, 18, 22, 23)
C
OK
RCL
PROG
RDL
PWR
KX-TCD951EB(008~015) 99.6.16 5:37 PM Page 8
Chapter 1 Preparation
9
Display
Icons
(The display shows all possible configurations.)
The in range icon indicates that the
handset is in range of the base unit.It
flashes when the handset is out of range.
The page/intercom icon is displayed
when paging or using the intercom.It
flashes when another unit pages the
handset.
The talk icon is displayed when making or
answering calls.It flashes when an
outside call is being received.
The direct call icon is displayed when
this mode is turned on (p.24).
The call prohibition icon is displayed
when this mode is turned on (p.25).
The program icon indicates that the unit
is in the programming mode.
The battery icon indicates the battery
strength (p.11).
is pressed while dialling.
is pressed while dialling.
RCL
RDL
Characters
P
F
is pressed while dialling.
is pressed while dialling.
4
Installing the Batteries in the Handset
Install the batteries as shown.Then install the handset cover.
Settings
•If the rechargeable batteries are not inserted correctly, the handset will not work.
KX-TCD951EB(008~015) 99.6.16 5:37 PM Page 9
Connections
Plug in the AC adaptor and the telephone line cord to the bottom of the unit.Then connect the
cords as shown.
10
Settings
8V 9V
Fasten the cords to prevent them
from being disconnected.
Hooks
To Mains Outlet
(AC 230–240 V, 50 Hz)
To B.T. Socket
AC Adaptor
Telephone Line Cord
TNV*
Telephone
Line Cord AC
Adaptor
•USE ONLY WITH Panasonic AC ADAPTOR KX-TCA9E OR KX-TCA11E.
•Be careful not to confuse the telephone line jack with the AC adaptor jack on the base unit.If
connected improperly, the base unit will not work and damage may occur.
•The AC adaptor must remain connected at all times.(It is normal for the adaptor to feel warm during
use.)
•To connect a standard telephone on the same line, see page 45.
CONNECTION OF POWER SUPPLY
This apparatus is intended for use when powered by the KX-TCA9E or KX-TCA11E.
Using other power supplies will invalidate any approval given to this apparatus.
*The abbreviation TNV means
“Telephone Network Voltage”.
KX-TCD951EB(008~015) 99.6.16 5:37 PM Page 10
Inhaltsverzeichnis
Andere Panasonic Schnurloses Telefon Handbücher
Panasonic
Panasonic KX-TC180-B Bedienungsanleitung
Panasonic
Panasonic KX-TGC450G Bedienungsanleitung
Panasonic
Panasonic KX-TGB110UE Bedienungsanleitung
Panasonic
Panasonic KX-TC1484F Bedienungsanleitung
Panasonic
Panasonic KX-TGA659C Bedienungsanleitung
Panasonic
Panasonic KX-TG4011N Bedienungsanleitung
Panasonic
Panasonic KX-TG1711BX Bedienungsanleitung
Panasonic
Panasonic KX-TG4012C Bedienungsanleitung
Panasonic
Panasonic KX-TG9331 Bedienungsanleitung
Panasonic
Panasonic KX-TGB110NZ Bedienungsanleitung
Panasonic
Panasonic KX-TG2730S - 2.4 GHz DSS Expandable Cordless... Bedienungsanleitung
Panasonic
Panasonic KX-TG7733S Bedienungsanleitung
Panasonic
Panasonic KX-TCD203E Bedienungsanleitung
Panasonic
Panasonic Factory Line 100-60 Bedienungsanleitung
Panasonic
Panasonic KX-THA 16 Bedienungsanleitung
Panasonic
Panasonic KX-T7885 - Battery For Bedienungsanleitung
Panasonic
Panasonic KX-TG2650N Bedienungsanleitung
Panasonic
Panasonic KX-TG2239B Bedienungs- und Montageanleitung
Panasonic
Panasonic KX-TCD212E Bedienungsanleitung
Panasonic
Panasonic KX-TCD210E Bedienungsanleitung
