Panasonic CF-27 Series Bedienungsanleitung

CF-27 Series

Reference Manual

Personal Computer

We recommend that this Reference Manual be printed.

Illustrations in this Reference Manual

Contents

Key Combinations ............................................. 2

LED Indicators ................................................... 3

Touch Pad (Advanced) .........................................4

Touchscreen ..................................................... 8

Panasonic Hand Writing................................. 10

Suspend/Hibernation Functions ................... 12

Security Measures.......................................... 15

Computing On The Road................................ 20

Battery Power ................................................. 21

Using a Multimedia Pocket Device................ 27

Using PC Cards .............................................. 29

Adding Memory .............................................. 30

Port Replicator ................................................ 31

Using a Printer ................................................ 32

Using an External Display ............................. 33

Using USB Devices ........................................ 37

Infrared Data Communications ..................... 38

Modem ............................................................. 39

Hard Disk Drive ............................................... 40

Setup Utility .................................................... 41

Technical Information .................................... 47

List of Error Codes ......................................... 48

DMI Viewer ...................................................... 50

Dealing With Problems................................... 51

NOTE:NOTE provides a useful fact or helpful information.

CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.

WARNING:WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Shut Down]: This illustration means to click [Start], then to click [Shut Down].

(For some applications, you may need to double-click.)

Enter : This illustration means to press the [Enter] key.

Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

page: When the cursor is moved to an item under [Contents] or to page (green display), the

shape of the cursor will change to . Under this condition, if characters are tapped (or a

click is made), the corresponding page in the Reference Manual will be displayed.

: This illustration means to refer to the Operating Instructions.

Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the

explanation easier to understand.

Functions

Hold down the Fn key and press F2 to change the

brightness.

By pressing this key combination, you can select

either an external display*1, LCD or simultaneous,

even if an external display is not connected.

Rebooting the computer, or powering off then on,

restores the display setting of the Setup Utility. The

combination does not work when the computer is

in the Dual-Display Mode.

Pressing this key combination turns on/off audio

from the internal speakers and headphone jack.

Rebooting the computer, or powering off then on,

restores the speaker setting of the Setup Utility.

Pressing this key combination adjusts the volume

of the internal speakers and headphone jack.

Pressing this key combination causes the current

screen on the display to be saved to memory, and

powers off the computer. When the computer is

powered on, by sliding the power switch, the saved

screen will be displayed. (The computer must be

plugged into the AC adapter or have a battery pack

with sufficient remaining power installed.)

Pressing this key combination displays the remain-

ing battery capacity on the screen. ( page 21)

Pressing this key combination turns off the LCD

and hard disk drive until operation is resumed by

pressing any key or mouse*3 (except the keyboard

and mouse connected to the USB port).

LCD brightness con-

trol

Display change

Speakers on/off switch

Volume control

(down)

Volume control ( up)

Holding down on the

keys changes the

sound level.

Power off using the

suspend function

With Windows 98, this

key combination is not

supported

Remaining capacity of

the battery pack

ECO mode for con-

serving power

Key Combinations

Do not press the following key combinations repeatedly in (quick) succession.

Do not press the following key combinations while using the touch pad (touchscreen or mouse) or other keys.

Fn + F2

Fn + F3

Fn + F4

Fn + F5

Fn + F7

Fn + F8

Fn + F9

Fn + F

Fn + F6

Is displayed

when the bright-

ness is at its

maximum value.

Key Popup Window

OFF

Disabling the speakers will also disable the

warning beep.

Remaining

capacity (%)

display

Battery pack is

not installed.

Down

This key combination cannot be used to adjust

the volume of the warning beep.

*1The optional port replicator or external display adapter is required for use with an external display. ( page 31, page 33)

*2When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.

*3 This “mouse” indicates the touch pad, the touchscreen and an external mouse.

CAUTION

NOTE

This indicator lights green when Caps Lock is pressed. Subsequent non-

shifted input is capitalized.

These indicators light green when NumLk is pressed and then Key Pad is

pressed while holding down the Fn key. This causes a portion of the

keyboard to function as a numeric keypad. The [Enter] key functions

differently depending on the application.

This indicator lights green when ScrLk is pressed. Scroll lock functions

differently depending on the application.

This indicator lights green when Key Pad is pressed while holding down

the Fn key. When the indicator is lit, a portion of the keyboard functions

as arrow keys. The [Enter] key functions differently depending on the

application.

This indicator lights when the multimedia pocket device (floppy disk drive,

CD-ROM drive, DVD-ROM drive or SuperDiskTM drive) is accessed.

(When using the floppy disk drive as an external floppy disk drive, only

the access lamp on the side of the floppy disk drive is lit.)

This indicator lights when the hard disk drive is accessed.

Not lit : AC adapter not connected or charging not being per-

formed.

Orange : Charging in progress.

Green : Charging finished.

Red : Battery is low

(remaining battery capacity is approx. 9% or less).

Blinking red : Battery pack or charging malfunction.

Blinking orange : Battery capacity being refreshed.

Blinking orange five times after the AC adapter is connected :

Charging on standby. (The ambient temperature is

outside the allowable range. Once the allowable range

requirement is satisfied, charging begins automati-

cally.)

Not lit : Power off / Hibernation mode

Green : Power on

Blinking green : Suspend* mode

Caps Lock

NumLk (Numeric key)

ScrLk (Scroll lock)

KeyPad (Arrow key)

Multimedia pocket

device status

Hard disk status

Battery pack sta-

tus

Power status

LED Indicators

* With Windows 98, the "Suspend" is called "Standby".

Touch Pad (Advanced)

Wheel mode operations (almost identical

to the case of using the Microsoft®

IntelliMouseTM for scroll, zoom, etc., op-

erations) are possible for Microsoft®wheel

function-compatible applications.

Microsoft®IntelliMouseTM is a mouse-type

device that, in addition to the two conven-

tional buttons, incorporates a wheel able

to rotate forwards/backwards.

Use the touch pad to move the cursor on the display and perform normal computer

operations.

The touch pad has the following two modes of operation.

Scrolling Area

Microsoft®IntelliMouseTM Wheel Mode

(Setting at the time of purchase)

Only scroll operation is possible for ap-

plications not compatible with the

Microsoft®wheel function.

Even for applications compatible with the

Microsoft®wheel function, there are

cases where only vertical scrolling or

only horizontal scrolling is possible in this

mode.

Scrolling side-to-side

Possible when a check mark

is added for [Horizontal].

Scrolling up/down

: Typical mouse operations use this area.

When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and

[Vertical] of [Scroll Configuration], the entire surface can be used for typical

mouse operations.

Scrolling Area

Scrolling up/down

Possible when a check

mark is added for

[Vertical].

For the Pan and Auto Scroll functions, the en-

tire work surface of the touch pad can be used

for scrolling.

Changing the mode of the touch pad

1Select from the taskbar and then select [TouchPad] or select [TouchPad] in

[Start] - [Settings] - [Control Panel] - [Mouse].

2To set the Microsoft®IntelliMouseTM Wheel mode

Add the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].

To set the original mode

Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration]

and add the check mark for [Horizontal] and/or [Vertical] .

3Press [OK].

When you are not sure whether an application is compatible with the Microsoft®

wheel function or not, try using both modes. Furthermore, depending on the appli-

cation, there are cases where scrolling may not be possible with either mode.

Original Mode

Left Button

Right Button

Work Surface

NOTE

The touch pad has been designed to work only when a finger is used. Therefore, do

not use any implement on the touch pad.

NOTE

(To next page)

Touch Pad (Advanced)

Operate after pressing the two buttons simultaneously.

When releasing the auto scroll function:

One tap on the work surface.

Two quick taps, but on the

second tap leaving your fin-

ger down (applying pres-

sure) and moving it on the

work surface.

While holding down the

button, moving your fin-

ger on the work surface.

Basic Operation

Function Touch Pad Operation

Moving the Cursor

Tapping/Clicking

Double-Tapping/

Double-Clicking

Dragging

Scroll*2

Scroll a document

(rotate the wheel)

Auto Scroll*2

Automatically scroll a

document

(move the mouse after

clicking the wheel)

Move the tip of your finger

lightly over the surface.

Wheel

Original

Wheel

Original

tapping

clicking

double-tapping double-clicking

Wheel

Original

Wheel Original

Wheel

Original

Wheel

Original

Wheel

Original

Indicates an operation applicable to the Microsoft®IntelliMouseTM Wheel mode.

Indicates an operation applicable to the original mode.

Within the parentheses () are operations to follow when using an external Microsoft®

IntelliMouseTM.

*2Indicates that the movements will differ depending on the application.

When a check mark is added for [use Drag

Lock]*1

After the drag operation (above : left side), it is nec-

essary to determine the destination (e.g., location of

drop) by one tap. Under the condition no destination

is selected, do not use the suspend or hibernation

function. Nothing is shown on the display, even after

resuming from the suspend or hibernation mode.

In this case, the display will return after a tap or click

is made.

*1In [Start] - [Settings] - [Control Panel] - [Mouse] -

[Tap and Buttons]

Operate while holding down the two buttons.

Ctrl +

Magnify

Reduce

Pan*

Scroll in various directions of a

document

(move the mouse slightly while

holding down the wheel)

Zoom*

Magnify/reduce the display of

a document.

(rotate the wheel while holding

down Ctrl )

Data Zoom*

Display or hide a document, or

perform operations to return to

or proceed with Internet Ex-

plorer.

(rotate the wheel while holding

down Shift )

Function Touch Pad Operation

Wheel

Shift +

Within the parentheses () are operations to follow when using an external Microsoft®

IntelliMouseTM.

*Indicates that the movements will differ depending on the application.

Wheel

(To next page)

When an external mouse or trackball with additional functions (e.g., wheel func-

tion) is connected, a part or all of the additional functions may fail to operate. To

use these additional functions, install the driver or application software of the

external device by following the procedure below. However, once the driver or

application software is installed, touch pad functions (e.g., auto scroll) and

touchscreen may not operate even if the touch pad and touchscreen are enabled

(see the procedure for “When you want to re-enable the touch pad and

touchscreen.”).

1In [Control Panel] - [Add/Remove Programs], select [touch pad/touchscreen]

from the list, press [Add/Remove...] to delete it, then press [Yes] to confirm the

deletion. If the message appears to reboot your computer, press [Yes].

2Power off your computer ( “Starting Up/Shutting down”) and connect

the external mouse or trackball device to the computer.

3Turn the power on and run the Setup Utility ( page 41). In [Main] menu, set

[Touch Pad] and [Touchscreen] to [Disable] and close the Setup Utility.

4Following the operating instructions for the connected external mouse, install

the necessary driver.

When you want to re-enable the touch pad and touchscreen: page 7

When [PS/2 Compatible Mouse Port] is displayed in [Mouse]: page 7

Touch Pad (Advanced)

CAUTION

Handling the Touch Pad

When using a key combination such as Fn + F5 , do not touch the touch pad.

If a key combination is used while the pad is being touched, the function of the key

combination will not work. In addition, it is possible that control of the cursor will be

lost and the cursor will not show proper movements. In such cases, the computer

has to be restarted by using the keyboard (e.g., ).

Do not place any object on the work surface or press down forcefully with sharp-

pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and

ball point pen).

Do not allow things that could dirty the touch pad, such as oil. The cursor may not

work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Touch Pad (Advanced)

When you want to re-enable the touch pad and touchscreen;

1Uninstall the driver or application software of an external mouse or trackball

device. (Refer to the manual of the external device.)

If the explanation of uninstalling the driver or application software can not be

found in the manual of the external device, execute the following steps.

In [Control Panel] - [System] - [Device Manager], when an external mouse

or trackball device is displayed in [Mouse], press [Remove] to delete it, and

then press [OK] to confirm the deletion.

2Power off your computer ( “Starting Up/Shutting down”) and remove

the external mouse or trackball device.

3Turn the power on and run the Setup Utility ( page 41). In [Main] menu, set

[Touch Pad] and [Touchscreen] to [Enable] and close the Setup Utility.

4Confirm whether [touch pad/touchscreen] exists in [Mouse] (in [Control Panel]

- [System] - [Device Manager]).

When [PS/2 Compatible Mouse Port] is displayed in [Mouse]:

1Select [PS/2 Compatible Mouse Port] and then press [Properties].

2Select [Driver] - [Update Driver] and then press [Next].

3Select [Display a list of all the drivers....] and then press [Next].

4Press [Have Disk].

5Input [c:\util\drivers\mouse] and then press [OK].

6At the [Update Device Driver Wizard], press [Next].

7Press [Next], then press [Finish].

8The display will ask you to restart Windows, press [Yes].

CAUTION

Do not place any object on the surface or press down forcefully with sharp-pointed

objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pen).

Do not apply pressure within 5 mm of the perimeter of the display panel. The

cursor may move to the edge of the display.

Do not operate the computer when such things as dust are on the screen. Do not

allow contact with substances that could dirty the touchscreen, such as oil. The

cursor may not work properly in such cases.

When the touchscreen becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as a gauze.

Do not use benzene or thinner, or disinfectant-type alcohol.

Handling the Touchscreen

Your computer is equipped with a touchscreen display allowing you to perform the same

operations as the touch pad or mouse by touching the surface of the display with your

finger. The following explanation gives one example (for the default settings). The op-

eration settings can be changed. ( page 9)

Moving the cursor Clicking

Double-clicking Dragging

Cursor

Touchscreen

The touchscreen function can not be used in the MS-DOS mode and when using

the full screen in [MS-DOS prompt].

When displaying with the LCD alone or displaying with the LCD and an external

display simultaneously, the touchscreen function cannot be used when the area

of either display is set larger (e.g., 1024 x 768 dots) than the resolution of the

LCD (i.e., 800 x 600 dots).

When mouse drivers are installed (e.g., Intellimouse), the touchscreen function

can not be used.

When you want to uninstall or reinstall the touchscreen (touch pad) driver, refer to

the “Touch Pad (Advanced)”. ( page 6 “CAUTION”, page 7 “CAUTION” )

If a change is made to the screen resolution, or the cursor can not be pointed

correctly with your finger, be sure to perform [Calibration]. ( page 9)

Even when only an external display is in use, the cursor will move on the external

display if the surface of the internal LCD is touched when the touchscreen driver

is active. Therefore, do not touch the LCD when only an external display is in use.

Touch and hold the object (i. e.

file or icon), move your finger on

the surface (dragging the object

to the desired location), then re-

lease your finger.

Two quick

taps

One tap

CAUTION

(To next page)

Configuring the Touchscreen

When needed, the touchscreen can be configured using the following steps.

2Make necessary changes

3Click [OK]

For more information, click at the upper right corner.

1Select from the taskbar and then select [TouchScreen]

or select [TouchScreen] in [Start] - [Settings] - [Control

Panel] - [Mouse]

The following screen will appear.

Advanced configuration

Set the advanced settings.

Calibration & Test

Define the calibration setup. Use

this procedure when the cursor

and your (finger) touches do not

appear to agree. (Necessary for

changes in the alignment of the

touchscreen with visual images or

an adjustment of the display reso-

lution.)

Touch the “+” mark on the calibra-

tion screen for about one second.

After the calibration procedure is

executed (e.g., after the nine “+”

marks are touched), the proce-

dure ends when the Enter is

pressed.

The double-click speed of the Touchscreen can be changed in [Tap and Buttons] in

[Start] - [Settings] - [Control Panel] - [Mouse].

Touchscreen

Test

Test for the “Double click settings”.

Double click settings

Set the width and height

of the double click.

NOTE

Drawing Characters or Figures

(To next page)

Panasonic Hand Writing

Simple characters and figures like signatures and arrows can be made by using the

work surface of the touchscreen, and can be saved to a file as a bitmap (.bmp) format.

1Select from the taskbar or select [Panasonic Hand Writing]

from [Start] - [Programs] - [Panasonic]

2Draw a character or figure using the work surface of the

touchscreen

To draw, an object with a rounded tip (e.g., a pen for tablets) can be used.

Do not use any of the following objects, as they may damage the work surface.

• Objects with an extremely sharp tip, like screwdrivers and nails.

• Objects that leave marks, like ball-point pens.

Do not perform a drag operation by the Touch Pad or the external mouse as

the movement will be input on the display.

3Select [Save As] or [Save] from [File]

• The file size of a bitmap image to be saved or pasted to another application

can be changed with [Option] - [Window size].

• Any change to the size of an image must be made before beginning to draw. If

the image size is changed after the drawing is completed, the image (quality)

will not be sharp.

• Data can be copied to the clipboard with [Edit] - [Copy]. Copied data can be

added to other applications that support the bitmap format by using the

paste function. Pasting is not possible to applications that do not support the

bitmap format.

Drawing accuracy may be degraded if another application, such as FD access-

ing, is being executed simultaneously. Begin drawing only after other applica-

tions have been closed.

Changing the number of colors of the display may affect the Panasonic Hand

Writing screen. If the screen is affected, click on the taskbar with the right

mouse button, close the application by selecting [Exit Panasonic Hand Writing],

and then run Panasonic Hand Writing again.

CAUTION

NOTE

CAUTION

NOTE

Andere Handbücher für CF-27 Series

Inhaltsverzeichnis

Andere Panasonic Desktop Handbücher

Panasonic

Panasonic CF-H1 Series Bedienungsanleitung

Panasonic

Panasonic 9TGCF-181A Bedienungsanleitung

Panasonic

Panasonic Toughpad FZ-M1CCAAXBM Bedienungsanleitung

Panasonic

Panasonic CF-D1DW2 Series Verdrahtungsschema

Panasonic

Panasonic CF-T2 Series Bedienungsanleitung

Panasonic

Panasonic CF-M34 Series Bedienungsanleitung

Panasonic

Panasonic FZ-M1 Series Bedienungsanleitung

Panasonic

Panasonic JS-970 Series Bedienungsanleitung

Panasonic

Panasonic CF-33 series Bedienungsanleitung

Panasonic

Panasonic CF-M34 Series Bedienungsanleitung

Panasonic

Panasonic CF18KHHZXBM Bedienungsanleitung

Panasonic

Panasonic CF-H1 Series Verdrahtungsschema

Panasonic

Panasonic Toughbook CF-18 Series Verdrahtungsschema

Panasonic

Panasonic CF55M5M8AM - PERSONAL COMPUTER Bedienungsanleitung

Panasonic

Panasonic 9TGCF-742 Bedienungsanleitung

Panasonic

Panasonic FZ-Y1 series Bedienungsanleitung

Panasonic

Panasonic FZ-G2 Series Bedienungsanleitung

Panasonic

Panasonic CF-52 Series Bedienungsanleitung

Panasonic

Panasonic CF-33 series Bedienungsanleitung

Panasonic

Panasonic CF-Y7B Bedienungsanleitung

Panasonic

Panasonic CF-T5 Series Bedienungsanleitung

Panasonic

Panasonic FZ-55 Series Bedienungsanleitung

Panasonic

Panasonic CF-51 Series Bedienungsanleitung

Panasonic

Panasonic CF-51 B Series Verdrahtungsschema

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung