Panasonic ToughBook CF-72 Series Verdrahtungsschema

Illustrations in this Manual

CF-72 with Internal LAN Port

Supplementary Instructions

Personal Computer

This Supplementary Instructions manual explains how to get started with an internal LAN and point out cases where the operation

of the computer will differ from that in the Operating Instructions and/or Reference Manual.

Windows 98 : Information for Microsoft®Windows®98 users.

Windows NT : Information for Microsoft®Windows NT® Workstation Version 4.0 users.

Windows 2000 : Information for Microsoft®Windows®2000 Professional users.

Replace the step 8for the following.

First-time Operation “OPERATING INSTRUCTIONS (page 11, 12)”

Windows 98 Windows 2000

8SetupWindows

Moving the cursor ( ) or clicking buttons can be performed with the touch pad.

Windows 98

1In [Add New Hardware Wizard], press [Next].

2Select [Search for the best driver for your device], press [Next].

3Input [c:\util\drivers\clan], then press [Next].

4Press [Next], then press [Next].

If the [Insert Disk] is displayed, press [OK] and input [c:\util\drivers\clan], then

press [OK].

Each time the [Version Conflict] is displayed, select [Yes].

5Press [Finish].

The display will ask you to restart Windows, press [Yes].

At [Enter Network Password], press [OK].

6In [Add New Hardware Wizard], press [Next].

7Select [Search for the best driver for your device], press [Next].

8Input [c:\util\drivers\cmodem], then press [Next].

9Press [Next].

Press [Finish].

Select settings for your region and your keyboard layout, then press [Next].

(for U.S.A.: United States 101)

Enter your name, then press [Next].

Select [Skip] at the [Using Your Modem to Connect].

Select [Yes] at the [Cancel Dialing], then press [Next].

The License Agreement will be displayed.

(To next page)

5Enter your computer name and administrator password, then press [Next].

2After reading the agreement, select [I accept this agreement] or [I don't accept this

agreement], then press [Next].

3Select settings for your region, then press [Next].

4Enter your name and organization, then press [Next].

NOTE

If [I don't accept this agreement] is selected, the Windows setup will be aborted.

The [Your product key] is displayed after you enter your name and organiza-

tion.

Input the Product Key written down in the “Customer's Record”, then press

[Next].

NOTE

CAUTION

Remember this password! If the password is forgotten, Windows 2000 cannot be

operated.

6Input the correct date, time and time zone and press [Next].

You can also complete these settings at a later time.

7At the [Networking Settings], select [Typical settings], then press [Next].

8At the [Workgroup or Computer Domain], select [No, this computer is not on a net-

work, or is on a network without a domain], then press [Next].

9Press [Finish]. The computer will restart.

At the [Network Identification Wizard], press [Next].

1At the [Welcome to the Windows 2000 Setup Wizard], press [Next].

Do not press any key or move the touch pad until [Windows 2000 Professional Setup]

is displayed.

CAUTION

Windows 2000

If [I do not accept the agreement] is selected, the Windows setup will be aborted.

After accepting the agreement, the [Windows product key] is displayed.

Input the Product Key written down in the "Customer's Record" section, then

press [Next].

NOTE

After reading the agreement, select [I accept this agreement] or [I do not accept the

agreement], then press [Next].

Press [Finish].

Input the correct date, time and time zone and press [Close]. You can also complete

these settings at a later time.

Supplementary Instructions

At the [Users of This Computer], select [Users must enter a user name and password to

use this computer], then press [Next].

Press [Finish].

Enter your administrator password, then press [OK].

When [Digital Signature Not Found] is displayed, press [Yes].

Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] - [Hard-

ware].

Double-click [Intel 8255x-based PCI Ethernet Adapter (10/100)] in [Network adapt-

ers].

Select [Driver] and press [Update Driver].

Press [Next], then press [Next].

Add the check mark for [Specify a location] and press [Next].

Input [c:\util\drivers\clan] and press [OK].

Add the check mark for [Install one of the other drivers] and press [Next].

Select the driver for which the [Provider] is [Intel], and then press [Next].

Each time [Digital Signature Not Found] is displayed, press [Yes].

Press [Finish] and press [Close].

NOTE

About the steps after 7, we recommend asking your system administrator or the

person in charge of the network.

At the [Getting started with Windows 2000]:

Press [Exit] to close.

When selecting [Discover Windows], the computer may ask you to install the Win-

dows 2000 CD. In such cases, close the windows, and then specify

[c:\winnt\cdimage\discover], then select [OK].

LAN Port

WARNING

Do not insert a telephone line connector (including a

PBX internal phone) into the LAN port. Doing so

may cause fire or electric shock.

Using LAN

This model has an internal LAN port.

Setting for LAN

Windows NT

Select [Network] in [Start] - [Settings] - [Control Panel]

2Select [Yes]

After selecting [Adapter] and pressing [Add], proceed to step 5.

When using the LAN, set [Modem/LAN] to [Enable]* in the Setup Utility. (* Default)

3Select [Wired to the network] and then press [Next]

4Select [Select from list]

NOTE

Select [Intel(R) PRO Adapter] and then press [OK]

1Select [Intel(R) PRO Adapter] and then press [OK]

2Select your protocol and network service (etc.).

3Press [Close] and follow the on-screen instructions, then proceed to step 12.

Press [Next]

Select your protocol and then press [Next]

Select your network service and then press [Next]

Press [Next]

Input [c:\winnt\i386] and then press [Continue]

Perform this procedure only when the screen to insert the Windows NT CD is

displayed.

Follow the on-screen instructions.

The settings will vary for different network environments depending on the network

system being used. For more details, ask your system administrator or the person in

charge of the network.

In [Start] - [Run], input [c:\sp6\sp6i386.exe], then press [OK]

Follow the on-screen instructions.

6Input [c:\util\drivers\clan] and then press [OK]

Press [Have Disk]

Do not use standby or hibernation functions during communications.

Unable to connect to network (When the indicator of your HUB unit does not light):

Windows 98

1Select [Network] in [Start] - [Settings] - [Control Panel].

2Select [Intel 8255x-based PCI Ethernet Adapter (10/100)].

3Select [Properties].

4Select [Advanced].

5Select [Link Speed & Duplex] from [Property], set [Value] to the communication

speed (10 Mbps or 100 Mbps) suitable for your network environment, and then press

[OK].

Windows NT

1Select [Adapters] in [Start] - [Settings] - [Control Panel] - [Network].

2Select [Intel 8255x-based PCI Ethernet Adapter (10/100)].

3Select [Properties] - [Advanced].

4Select [Link Speed & Duplex] from [Setting], set [Value] to the communication speed

(10 Mbps or 100 Mbps) suitable for your network environment, and then press [OK].

Windows 2000

1Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] - [Hard-

ware].

2Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] from [Network adapters].

3Select [Action] - [Properties].

4Select [Advanced].

5Select [Link Speed & Duplex] from [Property], and set [Value] to the communication

speed (10 Mbps or 100 Mbps) suitable for your network environment, and then press

[OK].

Supplementary Instructions

Using the Computer as a Network Computer

This is a function to automatically power ON the computer from a network server. To use

this function, it is necessary to have a network environment that accommodates Wake up

from LAN.

To use this function:

Windows 98 Windows 2000

1Select [Device Manager]*1in [Start] - [Settings] - [Control Panel] - [System].

2Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] from [Network adapters].

3Select [Properties]*2.

4Select [Power Management] and add the check mark for [Allow this device to bring the

computer out of standby], and then press [OK].

*1Windows 2000: [Hardware] - [Device Manager]

*2Windows 2000: [Action] - [Properties]

Windows NT

Set [Wake up from LAN] to [Enable] with the Setup Utility. ( page 7)

Be sure to connect the AC adaptor, and enable the supply of power.

Make settings to allow the use of a Local Area Network.

Windows 98 Windows 2000

When using the Wake up from LAN function, delete the check mark for [Prompt for

password when computer goes off standby] in [Start] - [Settings] - [Control Panel] -

[Power Management]* - [Advanced].

* Windows 2000 : [Power Options]

The Wake up from LAN function will not operate under the following conditions:

- When the computer has been shut down.

-Windows 98

When the computer has been placed in standby or hibernation mode from MS-DOS

mode.

This works on Windows 98 or Windows 2000 irrespective of the [Wake up from LAN]

setting of the Setup Utility.

Windows NT

The Wake up from LAN function will not operate under the following conditions:

- When the computer has been shut down by sliding the power switch for more than

four seconds.

- When the password has been input incorrectly, and the computer has returned to

standby, hibernation, or power off status.

When using the Wake up from LAN function, the password is not necessary even if

the password has been set in the Setup Utility.

When using the computer as a network computer, some additional settings may have to be

made depending on the usage conditions. We recommend asking your system administrator

or the person in charge of the network.

Wake up from LAN

NOTE

Windows 98

Modem “REFERENCE MANUAL (page 50,52)”

Replace the step 2for the following.

21Select [Modems] in [Start] - [Settings] - [Control Panel].

2Select [Lucent Win Modem] and press [Remove].

3Select [Dialing Properties].

Input the necessary information (items such as the country, area code, etc.) and press

[OK], then press [Close].

Reinstallation “OPERATING INSTRUCTIONS (page 26)”

Add the following information in step 8of “Setup Windows after reinstalling”.

The driver for the internal LAN port is in [c:\util\drivers\clan]. Be sure to select [Intel(R) PRO

Adapter].

Windows NT

Specifications “OPERATING INSTRUCTIONS (page 33)”

Internal LAN IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX

Add the following information.

Windows NT

21Select [Start] - [Run].

2Type [c:\util\drivers\cmodem\setup.exe] and press [OK].

3Select [Next], then select [Next].

4Select [Finish].

Replace the step 2for the following.

Supplementary Instructions

Replace the step 14 for the following.

14 Perform the setup procedure for Windows by following the instructions on the screen.

Windows 98 Windows 2000 Supplementary Instructions page 1 - 3

Windows 98 Windows 2000

Modem/LAN

Wake up from LAN*

Setup Utility “REFERENCE MANUAL (page 56)”

Replace the “Advanced”menu for the following.

Parameters ( : Default)

Device Configuration: [BIOS]

Serial Port: [Auto]

IrDA Port: [Auto]

Parallel Port: [Auto]

Mode: [ECP]

Sound Controller: [Enable]

Modem/LAN: [Enable]

Wake up from LAN: [Disable]

*[Disable] is automatically set when [Modem/LAN] is set to [Disable].

Wake up function works on Windows 98 or Windows 2000 irrespective of the [Wake up form LAN]

setting.

When the [Wake up from LAN] has been enabled;

In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your computer

consumes approximately 3.0 W.

Disable

Enable

Disable

Enable

FJ1100-0

DFQX5236ZA

Panasonic Personal Computer Company,

50 Meadowlands Parkway, Panazip 2F-5,

Secaucus, NJ 07094

Panasonic Canada Inc.

5770 Ambler Drive Mississauga,

Ontario L4W 2T3

Printed in Japan

Andere Handbücher für ToughBook CF-72 Series

Inhaltsverzeichnis

Andere Panasonic Desktop Handbücher

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic CF-19 series Verdrahtungsschema

Panasonic

Panasonic CF-52AJCBUAE Bedienungsanleitung

Panasonic

Panasonic AY-NE2000E Bedienungsanleitung

Panasonic

Panasonic CF-25 Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-18 Series Verdrahtungsschema

Panasonic

Panasonic CF-T2 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-48 Series Bedienungsanleitung

Panasonic

Panasonic 5000 Series Bedienungsanleitung

Panasonic

Panasonic CF-LX6 Series Bedienungsanleitung

Panasonic

Panasonic CF-27 Series Bedienungsanleitung

Panasonic

Panasonic CF-M34 Series Bedienungsanleitung

Panasonic

Panasonic CF-30 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-H1ADBAZJM Bedienungsanleitung

Panasonic

Panasonic CF-W2 Series Bedienungsanleitung

Panasonic

Panasonic CF55M5M8AM - PERSONAL COMPUTER Bedienungsanleitung

Panasonic

Panasonic CF-71 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-47 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-18 Series Bedienungsanleitung

Panasonic

Panasonic CF-T5 Series Verdrahtungsschema

Panasonic

Panasonic 3E Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-47 Series Bedienungsanleitung

Panasonic

Panasonic UT-MA6 series Bedienungsanleitung

Panasonic

Panasonic CF-T1 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung