Panasonic CF-VDD283 Bedienungsanleitung

BEDIENUNGSANLEITUNG

Einführung........................................................... 11

Vorsichtsmaßnahmen zum Gebrauch .............. 12

Gebrauch des DVD-ROM-Laufwerk-Pack ......... 13

Installation der Software.................................... 15

Störungsbehebung ............................................. 16

Technische Daten............................................... 17

Introduction........................................................... 4

Usage Precautions ............................................... 5

Using the DVD-ROM Drive Pack.......................... 6

Software Preparation............................................ 8

Troubleshooting ................................................... 9

Specifications ..................................................... 10

OPERATING INSTRUCTIONS

DVD-ROM Drive Pack

DVD-ROM ドライブパックドライブパック

ドライブパックドライブパック

ドライブパック

CF-VDD283

DEUTSCH

ENGLISH

MODE D'EMPLOI

FRANÇAIS Introduction......................................................... 18

Précautions d’utilisation .................................... 19

Utilisation du lecteur DVD-ROM ........................ 20

Préparation du logiciel ....................................... 22

Dépannage .......................................................... 23

Spécifications ..................................................... 24

DFQX5301ZB FJ0102-1052

取扱説明書取扱説明書

取扱説明書

日本語日本語

日本語

保証書付き（日本国内向け）

・この取扱説明書と保証書をよくお

読みのうえ、正しくお使いくださ

い。そのあと保存し、必要なとき

にお読みください。

・保証書は「お買い上げ日・販売店

名」などの記入を必ず確かめ、販

売店からお受け取りください。

はじめにはじめに

はじめに ..........................................................................

..........................................................................

.....................................

安全上のご注意安全上のご注意

安全上のご注意 ..............................................................

..............................................................

...............................

使用上のお願い使用上のお願い

使用上のお願い ..............................................................

..............................................................

...............................

DVD-ROM

ドライブを使うドライブを使う

ドライブを使う ............................................

............................................

......................

困ったときの困ったときの

困ったときの

Q&A

..........................................................

.............................

仕様仕様

仕様 ..................................................................................

..................................................................................

.........................................

保証とアフターサービス保証とアフターサービス

保証とアフターサービス ..............................................

..............................................

.......................

Printed in Japan

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RA-

DIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL

WARNUNG!

DIESES PROUKT ERZEUGT LASERSTAHLUNG.

DURCHFÜHRUNG ANDERER VORGÄNGE ALS DER HIER ANGEGEBENEN KANN

ZU GEFÄHRLICHER STRAHLUNG FÜHREN.

REPARATUREN DÜRFEN NUR VON QUALIFIZIERTEM FACHPERSONAL

DURCHGEFÜHRT WERDEN.

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L'UTILISATION DE COMMANDES OU DE RÉGLAGES OU L'EXÉCUTION DE

PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE

EXPOSITION À DES RADIATIONS DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOI-MÊME.

CONFIER TOUT TRAVAIL D'ENTRETIEN À UN PERSONNEL QUALIFIÉ.

VARNING

Om apparaten används på annat sätt än i denna bruksanvisnig specificerats, kan användaren

utsättas för osynlig laserstrålning, som överskrider gränsen for laserklass 1.

CLASS 1 LASER PRODUCT

LASER KLASSE1

For U.S.A.

Federal Communications Commission Radio Frequency Interference

Statement

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the Panasonic Service Center or an experienced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded interface cables when connecting to a

computer or peripheral. Also, any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Responsible Party: Matsushita Electric Corporation of America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP-5 (1-800-527-8675)

For Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Thank you for purchasing the DVD-ROM Drive Pack for the Panasonic CF-27L/CF-28

notebook computer series.

The DVD-ROM Drive Pack connects to the computer through the Multimedia Pocket.

Store this manual in a safe place after reading it.

DVD-ROM Drive Pack*.............1 Operating Instructions ............1

Introduction

* The DVD-ROM Drive Pack may also be referred to as the DVD-ROM drive.

[Illustration in this manual]

Windows 2000 indicates Microsoft®Windows®2000 Professional Operating System.

Windows XP indicates Microsoft®Windows®XP Professional Operating System.

Windows 98 indicates Microsoft®Windows®98 Second Edition Operating System.

Windows NT indicates Microsoft®Windows NT®Workstation Version 4.0.

Windows XP

This manual explains the procedure for default settings. The procedure may differ

according to the settings.

NOTE

Microsoft®, MS-DOS®, Windows®and Windows NT®are registered trademarks of Microsoft Corpo-

ration in the United States and/or other countries.

Usage Precautions

If the disc gets dirty

After wiping the disc with a moist, soft

cloth, wipe it with a dry cloth. Always

wipe from the center toward the edge.

Do not place items other than discs on the tray.

Do not leave the tray in the open position or touch the lens area. Should the lens

become soiled by dust or dirt, the unit may not read discs properly.

Under some conditions, dust may build up on the optical lens or disc, possibly resulting in

malfunction.

Do not apply excessive force to the tray in the open position, doing so could damage the

tray.

Do not open the DVD-ROM drive or move the computer while the DVD-ROM drive is

being accessed. Doing so could cause it to malfunction. In addition, after running an

application involving access to a disc, do not open the DVD-ROM drive or remove the

disc until after the application has been closed.

After closing the tray, do not attempt to access a disc until the MP indicator ( ) disap-

pears.

Do not expose the DVD-ROM Drive Pack to oily or tobacco smoke. Doing so could

shorten the service life of the lens.

Cleaning the DVD-ROM drive using a CD lens cleaner (except a liquid type cleaner) is

recommended if it malfunctions.

Never insert foreign objects such as paper clips into the DVD-ROM Drive Pack.

Do not use discs that have become deformed (warped, not completely round, etc.).

The playback of CDs containing moving pictures (Video CDs, CDs including MPEG

data, etc.) may not be smooth.

For AutoPlay CDs:

• If an AutoPlay CD does not start after the computer resumes from the standby or hiber-

nation mode, we recommend reinserting the CD again after a 15-second wait.

• An AutoPlay CD may start during the access of a file.

To avoid damaging discs:

Do not touch the surface as it can cause the disc to become dirty or scratched.

Do not allow discs to become dirty or scratched.

Do not place or store discs in locations exposed to heat, direct sunlight, humidity or dust.

Do not write on the surface of the disc with a ball-point pen or other writing instrument.

If the disc is brought from a cold into a warm environment, moisture may form on the disc.

Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.

Do not drop, bend, or place heavy objects on top of discs.

Cleaning the disc using a CD cleaner is recommended once every 2 or 3 months.

Using the DVD-ROM Drive Pack

When booting up from the FIRSTAID FD (for example, to reinstall the operating sys-

tem), the DVD-ROM Drive does not have to be replaced by the CD-ROM Drive (CF-

VCD271). The CD-ROM driver will recognize the DVD-ROM Drive.

If the PC Card does not work, there may be no interrupt request (IRQ) line available.

Deactivate unnecessary equipment using in Setup Utility.

A PC Card is required to play DVD-Video or MPEG2 files when using CF-27 model.

Separate application software is required to play DVD-Video or MPEG2 files when us-

ing CF-28 model.

The picture quality of a DVD depends on the DVD playback software.

Refer to the manual of separate DVD playback software.

Refer to the Reference Manual included with your computer on how to install/remove the

DVD-ROM Drive Pack.

Installing/Removing a Device

Windows 2000

Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Settings] -

[Control Panel] - [System] - [Hardware] - [Device Manager] - [IDE ATA/ATAPI con-

trollers] - [Secondary IDE Channel] - [Advanced Settings] - [Device 0]. Perform this

setting if it has not yet been made.

Windows XP

Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Control Panel]

- [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [IDE

ATA/ATAPI controllers] - [Secondary IDE Channel] - [Advanced Settings] - [Device

0]. Perform this setting if it has not yet been made.

Windows 98

Confirm the following contents in [Start] - [Settings] - [Control Panel] - [System] -

[Device Manager] - [CDROM] - [MATSHITA DVD-ROM SR-**** ] - [Settings].

Make the settings if they have not yet been made.

• Add a check mark for [DMA].

• Set both [Start drive letter] and [End drive letter] in [Reserved drive letters] to [L:].

NOTE

If the DVD-ROM Drive Pack has not been accessed within 90 seconds, the drive motor will

automatically shut down to reduce the power consumption. When the DVD-ROM Drive

Pack is accessed once again, the power of the drive motor is turned on. However, approxi-

mately 30 seconds are required until data is actually read from the disc.

Power-saving Mode

Center Holder

Eject Button

Label side up

1Power on your computer

2Open the disc tray

Press the eject button and slowly pull out the tray.

3Place a disc

Place the disc with the label facing upward in the

drive and push down until the center holder clicks.

Place a finger on the center holder and lift up on the

edge of the disc.

4Close the disc tray

Close the tray without touching the eject button.

If the vibration of the DVD-ROM drive is excessively high, use the Setup Utility to

reduce the CD-ROM or DVD-ROM drive speed by setting it to [Low]. (This setting

does not work for the DVD-ROM disc.)

NOTE

Setting a Disc

Software Preparation (first time only)

Windows 98

To use the DVD-ROM Drive Pack in the MS-DOS mode, configure the drive following the

steps below after performing the preparations ( page 6, “NOTE”). If the steps listed

below are performed without completing the preparations first, the drive will not op-

erate properly.

Using the DVD-ROM Drive Pack in the MS-DOS Mode

1Click the [Start] button then select [Shut Down].

2Select [Restart in MS-DOS mode] and click [OK].

3Open the “CONFIG.SYS” file for editing by issuing the following commands:

cd \ Enter

edit config.sys Enter

4Move the cursor to the line containing “OAKCDROM.SYS” and delete the characters

“rem” at the beginning of the line. (Deleting “rem” causes the item to become valid.)

DEVICEHIGH=C:\WINDOWS\COMMAND\OAKCDROM.SYS /D:MSCD000

(If this line is missing, add it.)

5Press Alt + F, then Sto save the file. Then press Alt + F, then Xto

exit the Edit program.

6Follow the same steps to edit the “AUTOEXEC.BAT” file.

edit autoexec.bat Enter

7Move the cursor to the line containing “MSCDEX.EXE” and delete the characters “rem”

at the beginning of the line. (Deleting “rem” causes the item to become valid.)

LOADHIGH C:\WINDOWS\COMMAND\MSCDEX.EXE /D:MSCD000 /L:L

(If this line is missing, add it.)

8Press Alt + F, then Sto save the file. Then press Alt + F, then Xto

exit the Edit program.

9Restart the computer.

Check the settings by following the instructions in “In-

stalling / Removing a Device”.

Is the DVD-ROM Drive Pack properly mounted in the

multimedia pocket?

Is the disc loaded on the tray correctly?

Is the disc bent, scratched, or dirty?

Is the computer powered on?

To remove a disc when the computer is powered off, in-

sert a sharp object such as the bent-out tip of a paper clip

into the emergency hole. Pushing it completely to the end

will free the tray so that it can be pulled out.

Did you open the DVD-ROM drive or remove the disc

while it was operating?

Re-insert the disc and close the DVD-ROM drive. Press

Enter .

Did you touch the eject button when you close the tray?

When the DVD-ROM drive is replaced after the CD-R/RW

drive has been installed in the Multimedia Pocket, files in-

side the drive sometimes cannot be accessed.

In this case, execute [Scan for hardware changes] using the

following procedure.

1Select [Device Manager] in [start]-[Control Panel] - [Per-

formance andMaintenance] - [System] - [Hardware].

2Selectthedrivedisplayedunder [DVD/CD-ROMdrives] (e.g.,

MATSHITA****), then select [Action] - [Uninstall] from the

menu and select [OK].

3Select[Action]- [Scanforhardware changes]fromthe menu.

(Microsoft Corp. has reported that the above noted problem

occurs.)

Troubleshooting

The computer does not rec-

ognize the DVD-ROM

Drive Pack.

The MP indicator ( ) does

not light.

Cannot play disc or read data

from it.

Cannot eject disc.

A blue background appears

on the screen with the

MPEG image.

The disc tray does not close.

Windows XP

Cannot access file for DVD-

ROM drive.

Emergency Hole

Description

DC 5V ± 0.25 V

8x DVD-ROM Drive max. speed

24x/20x*1CD-ROM Drive max. speed

4.7GB(DVD-5), 8.5GB(DVD-9), 9.4GB(DVD-10)

88.64 Mbit/s(10816 KB/s) 8x speed (Max.)

220 ms (8x Speed, DVD-9, 1/3 Stroke*3)

DVD-5, DVD-9, DVD-10, DVD-R*4 (3.95 GB,

4.7 GB), DVD-RAM*4*5(2.6 GB, 4.7 GB)

656 MB

3600KB/s 24x speed (Max.)

3000KB/s 20x speed (Max.)*1

135 ms (24x Speed, 1/3 Stroke*3)

138 ms (20x Speed, 1/3 Stroke*3)*1

CD-Audio, CD-ROM, CD-R*4, Photo CD, Video

CD, Enhanced Music CD, CD-RW*4, CD-TEXT

256 KB

Conforms to enhanced IDE (ATAPI) standard

130 mm x 150 mm x 23.7 mm

{5.1 " x 5.9 " x 0.9 "}

Approx. 270 g {0.6 lb.}

5°C to 35 °C {41 °F to 95 °F} /30 % RH to

80 % RH (no condensation)

Specifications

The region code has been set to the following :

<CF-VDD283M> Set to “1”.

<CF-VDD283Z> Set to “2”.

Use of another region code or alteration of the region code invalidates the warranty. For

more information, contact Panasonic Technical Support.

If commercially available DVD playback software asks you the region code, set to the fol-

lowing :

<CF-VDD283M> Set to “1”.

<CF-VDD283Z> Set to “2”.

*1 When using CF-27 model.

*2 If an unbalanced disc (i.e., a disc with which the balance has been displaced from the center) is inserted, the

speed may become slower if there are large vibrations while the disc is rotating.

*3 Stroke:Indicates the amount of movement the lens (pickup) of the DVD-ROM Drive Pack must make in

order to read data.

*4 Read only.

*5 In the case of DVD-RAM, only non-cartridge disks or removable cartridge disks can be used.

Item

Operating voltage range

Drive

Data Capacity

Data transfer rate*2

Access Time

Supports

Data Capacity

Data transfer rate*2

Access Time

Supports

Cache memory

Interface

Dimensions (width x depthx height)

Weight

Operating temperature /

Humidity range

DVD

-ROM

NOTE

Andere Handbücher für CF-VDD283

Inhaltsverzeichnis

Sprachen:

Andere Panasonic DVD-Laufwerk Handbücher

Panasonic

Panasonic LF-D103E Bedienungsanleitung

Panasonic

Panasonic CF-VDM302U Bedienungsanleitung

Panasonic

Panasonic CF-VDM311U Bedienungsanleitung

Panasonic

Panasonic CF-VDR302U Bedienungsanleitung

Panasonic

Panasonic VW-BN1 - DVD-RW / DVD-RAM Drive Bedienungsanleitung

Panasonic

Panasonic VW-BN1 - DVD-RW / DVD-RAM Drive Bedienungsanleitung

Panasonic

Panasonic CF-VDD283 Bedienungsanleitung

Panasonic

Panasonic CF-VDD285M Bedienungsanleitung

Panasonic

Panasonic SR-8588-B Bedienungsanleitung

Panasonic

Panasonic VW-BN1PP Bedienungsanleitung

Panasonic

Panasonic LF-D321U Bedienungsanleitung

Panasonic

Panasonic SR-8585-B Bedienungsanleitung

Panasonic

Panasonic LF-M621U Bedienungsanleitung

Panasonic

Panasonic VWBN2 - PORTABLE DVD BURNER Bedienungsanleitung

Panasonic

Panasonic CF-VDM312U Bedienungsanleitung

Panasonic

Panasonic KXL-CB30AU Bedienungsanleitung

Panasonic

Panasonic SR-8585-E Bedienungsanleitung

Panasonic

Panasonic FZ-VDR551 Series Bedienungsanleitung

Panasonic

Panasonic CF-VDM302AT Bedienungsanleitung

Panasonic

Panasonic CF-VDD711W Bedienungsanleitung

Panasonic

Panasonic SR-8586-B Bedienungsanleitung

Panasonic

Panasonic CF-VDM Series Bedienungsanleitung

Panasonic

Panasonic CF-VDD271W Bedienungsanleitung

Panasonic

Panasonic CF-VDD712M Bedienungsanleitung

Beliebte DVD-Laufwerk Handbücher anderer Marken

LG GSA-4160B Bedienungsanleitung

Sony

Sony DRU-500AX Bedienungsanleitung

LG GSA-2164D Bedienungsanleitung

Plextor

Plextor PX-755SA Bedienungsanleitung

Pioneer

Pioneer BDC-TD03RS Betriebsanleitung

Samsung

Samsung SM-332B Bedienungsanleitung

Freecom

Freecom MOBILE DVD RW II Bedienungsanleitung

Plextor

Plextor PX-712 Bedienungsanleitung

NEC

NEC ND-3550A Bedienungsanleitung

Emprex

Emprex Slim Writer DVD R/RW USB 2.0 External Drive Bedienungsanleitung

Philips

Philips PCA532K Bedienungsanleitung

Sony

Sony AD-7740H Bedienungsanleitung

Philips

Philips PCDV5016 Series Referenzhandbuch

Pioneer

Pioneer LaserMemory DVD-115 Bedienungsanleitung

Samsung

Samsung SE-S224Q Bedienungsanleitung

IBM

IBM 71P7285 Bedienungsanleitung

Pioneer

Pioneer DVR-A04 Bedienungsanleitung

IBM

IBM 27L2579 Bedienungsanleitung