Panasonic KX-HDV100 Service-Handbuch
Document Version 2017-08
Model No.
SIP Phone
KX-HDV100
Supplement for Administrator Guide
Please use this supplement manual together
with the latest English Administrator Guide.
KX‐HDV100SoftwareFileVersion06.000orlater
1. Add the settings
1.1 Add the WEB settings
(1) 4.5.1 SIP Settings
4.5.1.3 Advanced
TLS Port Random
Description
Value Range
Default Value
Configuration File Reference
UDP Port Random
Description
Value Range
Default Value
Configuration File Reference
1.2 Add the configuration parameters
(1) 5.3.2 Basic Network Settings
NW_TEST_COUNT
Value Format
Description
Value Range
Default Value
NW_TEST_TIMER
Value Format
Description
Value Range
Default Value
1-16
4
BOOLEAN
Specifies the length of time, in seconds, for a PING network test timeout.
1-10
5
Selects whether to assign a source port number randomly (ephemeral port) or to use a static source
port number when using SIP-TLS.
Note
・This parameter applies to all lines that use SIP-TLS.
・UDP/TCP ports are completely unaffected by this parameter.
No
SIP_UDP_RANDOM_PORT
INTEGER
Specifies the number trials for a PING network test.
・Yes (Assign a source port number randomly)
・No (Use a static source port number (Refer to SIP_SRC_PORT_n))
Yes
SIP_TLS_RANDOM_PORT
Selects whether to assign a source port number randomly (ephemeral port) or to use a static source
port number when using UDP.
Note
・This parameter applies to all lines that use UDP.
・Yes (Assign a source port number randomly
・No: (Use a static source port number (Refer to SIP_SRC_PORT_n))
(2) 5.3.18 SIP Settings
ENH_FOVR_RESPONSE_CODE
Value Format
Description
Value Range
Default Value
ENH_FOVR_REGISTER_ENABLE_n
Value Format
Description
Value Range
Default Value
ENH_FOVR_INVITE_ENABLE_n
Value Format
Description
Value Range
Default Value
ENH_FOVR_SUBSCRIBE_ENABLE_n
Value Format
Description
Value Range
Default Value
ENH_FOVR_BYE_ENABLE_n
Value Format
Description
Value Range
Default Value
Y
BOOLEAN
Specifies whether to enable failover when the response to a REGISTER request is the error code set
for ENH_FOVR_RESPONSE_CODE.
Y: Enable
N: Disable
STRING
Specifies the error code for failover.
Note
・The available error codes are: 403, 404, 406, 408, 480, 488, 500, 502, 503, 504, 600, 603, 604, 606
Example: ENH_FOVR_RESPONSE_CODE="408,603"
Max. 256 characters
Empty string
For details about parameter names end with "_n", see "5.2.1 Configuration File Parameters" in Administrator Guide.
BOOLEAN
Specifies whether to enable failover when the response to a BYE request is the error code set for
ENH_FOVR_RESPONSE_CODE.
Y: Enable
N: Disable
Y
For details about parameter names end with "_n", see "5.2.1 Configuration File Parameters" in Administrator Guide.
For details about parameter names end with "_n", see "5.2.1 Configuration File Parameters" in Administrator Guide.
For details about parameter names end with "_n", see "5.2.1 Configuration File Parameters" in Administrator Guide.
BOOLEAN
Specifies whether to enable failover when the response to a SUBSCRIBE request is the error code
set for ENH_FOVR_RESPONSE_CODE.
Y: Enable
N: Disable
Y
BOOLEAN
Specifies whether to enable failover when the response to an INVITE request is the error code set for
ENH_FOVR_RESPONSE_CODE.
Y: Enable
N: Disable
Y
SUBSCRIBE_403_REGSEND_ENABLE_n
Value Format
Description
Value Range
Default Value
SIP_UDP_RANDOM_PORT
Value Format
Description
Value Range
Default Value
Web User Interface Referenc
e
(3) 5.3.25 Telephone Settings
EMBEDDED_WEB_PASS_ENABLE
Value Format
Description
Value Range
Default Value
NETWORK_SETTINGS_PASS_ENABLE
Value Format
Description
Value Range
Default Value
BOOLEAN
Specifies whether to send a REGISTER request when "403" is received as the response to a
SUBSCRIBE request.
Y: Send
N: Do not send
N
BOOLEAN
Specifies whether to assign a source port number randomly (ephemeral port) or to use a static source
port number when using UDP.
Note
・This parameter applies to all lines that use UDP.
Y: Assign a source port number randomly
N: Use a static source port number (Refer to SIP_SRC_PORT_n)
N
BOOLEAN
For details about parameter names end with "_n", see "5.2.1 Configuration File Parameters" in Administrator Guide.
UDP Port Random
Specifies whether to require password authentication when setting "Embedded Web" from the phone
interface.
Note
・This password is same as the administrator password for logging in to Web User Interface
Programing.
Y: Require password authentication
N: Do not require password authentication
N
BOOLEAN
Specifies whether to require password authentication when setting "Network Settings" from the
phone interface.
Note
・This password is same as the administrator password for logging in to Web User Interface
Programing.
Y: Require password authentication
N: Do not require password authentication
N
AUTHENTICATION_PASS_ENABLE
Value Format
Description
Value Range
Default Value
(4) 5.3.29 Logging Settings
SYSLOG_TRANSPORT
Value Format
Description
Value Range
Default Value
SYSLOG_TLS_VERIFY
Value Format
Description
Value Range
Default Value
SYSLOG_ROOT_CERT_PATH
Value Format
Description
Value Range
Default Value
SYSLOG_CLIENT_CERT_PATH
Value Format
Description
Value Range
Default Value
SYSLOG_PKEY_PATH
Value Format
Description
Value Range
Default Value
INTEGER
Specifies the protocol for syslog.
0: UDP
1: TLS
Max. 384 characters
0: Do not verify
1: Verify
0
STRING
Specifies the URL where the root certificate is stored for authenticating the syslog server.
Specifies the URL where the private key is stored for authenticating the syslog client.
Max. 384 characters
Empty string
Empty string
STRING
Specifies the URL where the client certificate is stored for authenticating the syslog client.
Max. 384 characters
Empty string
STRING
Specifies whether to verify the TLS certificate when "SYSLOG_TRANSPORT" is set to "1"
0
INTEGER
N
BOOLEAN
Specifies whether to require password authentication when setting "Authentication" from the phone
interface.
Note
・This password is same as the administrator password for logging in to Web User Interface
Programing.
Y: Require password authentication
N: Do not require password authentication
2. Change the descriptions
(1) 2.1.5 Obtaining a Provisioning Server Address from DHCP Options
Change "d. Format for pre-provisioning server address obtained from DHCP option 66" to the following. (Page 40)
Format: <scheme>://<user>:<password>@<host>:<port>/<path>/<file name>
<scheme> Optional Protocol (TFTP/FTP/HTTP/HTTPS)
<user> Optional User name
<password> Optional Password
<host> Mandatory IP Address or Domain
<port> Optional Port number
<path> Optional Path
<file name> Optional File name
If DHCP option 66 does not include <scheme>, {MODEL}.cfg is obtained.*1
If the last character of DHCP option 66 is "/", {MODEL}.cfg is obtained.*1
If XXX.cfg is specified as <file name> in DHCP option 66, XXX.cfg is obtained.
*1 For models except those in the USA: Regardless of DHCP option 67 setting, {MODEL}.cfg is obtained
For models in the USA: If DHCP option 67 is set, the file in DHCP option 67 is obtained.
The examples in parentheses below show when {MODEL}.cfg is obtained.
1. Case 1: Protocol and server name
http://10.0.0.1/ (http://10.0.0.1/{MODEL}.cfg)
http://prov.com/ (http://prov.com/{MODEL}.cfg)
2. Case 2: Protocol, server name and path
http://10.0.0.1/pana/ (http://10.0.0.1/pana/{MODEL}.cfg)
http://prov.com/pana/ (http://prov.com/pana/{MODEL}.cfg)
3. Case 3: Protocol, user name, password and server name
http://id:[email protected]/ (http://id:[email protected]/{MODEL}.cfg)
http://id:[email protected]/ (http://id:[email protected]/{MODEL}.cfg)
4. Case 4: Server name
tftp://10.0.0.1 (tftp://10.0.0.1/{MODEL}.cfg)
tftp://prov.com (tftp://prov.com/{MODEL}.cfg)
(2) ID/PASSWORD for logging in to WEB interface
・Detele "(except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =, >, ?, [, ], ^, `, {, |, }, ~, \ and space)"
from Value Range in the following settings.
・Add "An underscore ( _ ) cannot be used as the first character." to Value Range in the following settings.
4.4.2.1 User Password - Current Password, New Password, Confirm New Password
4.4.3.1 Admin Password - Current Password, New Password, Confirm New Password
5.3.8 HTTPD/WEB Settings - USER_ID, USER_PASS, ADMIN_ID, ADMIN_PASS
(3) 5.3.22 SIP Settings
Delete the following configuration parameter. (Page 248)
ENH_FOVR_408_ENABLE_n
PNQX8312SA PP0316SM7087
Andere Handbücher für KX-HDV100
3
Inhaltsverzeichnis
Andere Panasonic IP-Telefon Handbücher
Panasonic
Panasonic KX-TGA301C Bedienungsanleitung
Panasonic
Panasonic KX-TG6411C Bedienungsanleitung
Panasonic
Panasonic KX-DT521 Referenzhandbuch
Panasonic
Panasonic BBGT1540 - GLOBARANGE CORDLESS PHONE Bedienungsanleitung
Panasonic
Panasonic KX-NT343 Bedienungsanleitung
Panasonic
Panasonic VoiceSonic KX-NT700 Bedienungsanleitung
Panasonic
Panasonic KX-TGP550 Handbuch
Panasonic
Panasonic KX-UT133-B Bedienungsanleitung
Panasonic
Panasonic KX-NT136 Bedienungsanleitung
Panasonic
Panasonic KX-TDA50 Handbuch
Panasonic
Panasonic KX-TGP500 Bedienungsanleitung
Panasonic
Panasonic KX-TD7590CE Bedienungsanleitung
Panasonic
Panasonic KX-TCA155 Bedienungsanleitung
Panasonic
Panasonic KX-NT551 Bedienungsanleitung
Panasonic
Panasonic KX-TS100EXW Bedienungsanleitung
Panasonic
Panasonic KX-TGP500 Gebrauchsanweisung
Panasonic
Panasonic KX-DT321C Bedienungsanleitung
Panasonic
Panasonic KX TPA 65 Bedienungsanleitung
Panasonic
Panasonic KX-NT346 Bedienungsanleitung
Panasonic
Panasonic KX-UT113 Bedienungsanleitung
