Panasonic KX-TDA50 Handbuch
Technical Information
DATE: MONDAY, AUGUST 31, 2009
DOCUMENT NO.: TN-KX-TAUDIO-083109
Title: Audio Issue on IP Phone
Systems Affected: KX-TDA 50/100/200/600, KX-TDE 100/200/600, and KXT-NCP 500/1000
Associated Tech Notes: None
Applications:
• Identify and resolve audio issues on a network and over the Internet.
What is covered?
Troubleshooting VOIP audio issues may be new to you. By searching the phrase "troubleshooting voip audio issues" on
the Web, you'll be able to find a lot of useful information. But before you search the Web, we would like to share with you
the information that we have developed concerning the following topics:
• Use VoIP Tool Test to identified and prevent any issues with one-way audio on a network and over the Internet.
• Configure the router and/or firewall and PBX for both data voice traffic.
• Re-run the VoIP Tool Test to ensure that each UDP port numbers has been enabled for both data and voice traffic.
VoIP Test Tool Features:
1) You can confirm which UDP port numbers for VoIP signal are blocked by a router or firewall.
2) Audio test: Can talk using VoIP. (PC-to-PC talk)
3) Audio test: Pre recorded file can be played on the other PC and it is sent to your PC).
4) Audio test: Traffic option (Max.100 VoIP channels can be sent in order to increase traffic and disturb
talk test or disturb data transmission such as WEB access).
5) PING.
6) Trace Route.
7) Chat (You can use that as a tool to communicate to the Tech person in the other site).
8) Report.
Pg. 1
Please Continue to Next Page
3DQDVRQLF7HOHSKRQH6\VWHPV
www.voicesonic.com
Phone 877-289-2829
KX-TDA50
KX-TDA100
KX-TDA200
KX-TDA600
KX-TDE100
KX-TDE200
KX-TDE600
KX-NCP500
KX-NCP1000
For the purpose of this technical document, Two PCs are required at each specific IP network for this test.
Important Note:
Do not use any IP Softphone or SIP client while running this VoIP tool test.
Run the test in both directions of the IP network to get an accurate test result from the VoIP tool test.
Preparation:
1) Go to the BTS Dealer website at www.btsdealer.com.
2) Click on the Technical Support tab.
3) Click on the Software tab.
4) Under the KX-TDA/KX-TDE Unified Programming Tool & VoIP Test Tool, save the VoIP Test Tool
application onto the Local drive, preferable the Desktop folder.
5) Install the VoIP Test Tool onto both PCs.
6) Start the VoIP Test Tool on both PCs.
(*Reminder: If you are considering testing the VoIP Test Tool on a Point to Point IP network, between
two remote sites and you have verified that you are able to ping the remote gateway and PC, then
another person must be available at the remote site to conduct and simulate the VoIP Test.)
7) Configure the VoIP Test options accordingly, whether it is the VoIP Signal Test or the Audio Test.
8) Start the VoIP test from either PC, such as Site A or Site B) by clicking on the Connect button in the
Menu Bar.
9) The PC that started the connection will be Local and the other PC will be Remote.
10) The VoIP test will run for a period of 2 to 3 minutes and then will disconnect with the test result.
11) Save the test log onto you PC and run the same test on the remote PC.
Router Configuration:
1) Make sure you have either a router or a firewall with the latest firmware that can run and support VoIP
networks. Quality of Service (QOS)
2) Make sure you have the following UDP (RTP: Real-Time Protocol) ports enable on either router or
firewall to support VoIP traffic:
A) 1719 and 1720
B) 5004 through 5006.
C) 5060.
D) 5061.
E) 8000 through 8034.
F) 16384 through 16482.
3) Make sure that the router and firewall are configured for QoS: Quality Of Service and separate VLANs
to ensure priority of data and voice traffic on the IP network.
(*Note: Get assistance from the network administrator to configure the router, switch or firewall
accordingly).
Pg. 2
Please Continue to Next Page
PBX setting:
Make sure you have the IP addresses for both the IPCMPR and VoIP-DSP in sequence and in the same IP
range on the IP network. For example, if the private IP network is 192.168.0.0/24, then set the IPCMPR for
192.168.0.101, the VoIP-DSP for 192.168.0.102, Subnet mask 255.255.255.0 and the default gateway address
is 192.168.0.1.
(*Note: You can assign public IP address scheme on both IPCMPR and VoIP-DSP as well, check with your
provider for details.)
KX-NCP Screenshot:
From the System Menu, click on Configuration / Slot (1.1). Hover your mouse pointer onto the IPCMPR card
and select Card Property. From the LAN Setting tab, here is where you want to set the IP address scheme for
the PBX to communicate over the IP network.
Pg. 3
Please Continue to Next Page
KX-TDE Screenshot:
From the System Menu, click on Configuration / Slot (1.1). Hover your mouse pointer onto the IPCMPR card
and select Card Property. From the LAN Setting tab, here is where you want to set the IP address scheme for
the PBX to communicate over the IP network.
Pg. 4
Please Continue to Next Page
KX-TDA IPGW4 Screenshot:
(*Note: You will have to log onto the IPGW4 card via Microsoft Internet Explorer using the default IP address:
192.168.1.200, username / password: Administrator / Administrator. Make sure your PC is on the same
network: 192.168.1.0 / subnet mask: 255.255.255.0 in order to log into the IPGW4 card.)
Once the router and PBX system have been configured, run the VoIP Test Tool again for the final test result.
Pg. 5
Please Continue to Next Page
Troubleshooting the audio issue on an IP Network:
1) Ping the remote IP address of the router and PBX to ensure connectivity of the remote site are still
active. Ping Plotter, a useful tool to ping various nodes either at a remote site or over the Internet and
get statistic of the test result, can be downloaded from their website: http://www.pingplotter.com.
2) If using a VPN connection, make sure that packet forwarding is disabled on both VPN routers.
3) Make sure that the IP phone was configured on the same IP network as the PBX before relocating the
phone to the remote site.
4) If you are experiencing audio issue from a remote site, consult with your network team to troubleshoot
the NAT configuration. If NAT is involved in the call path, configuration of the various devices may be a
problem.
5) Download, install and use the network sniffer-capturing application called WireShark from their website:
http://www.wireshark.org to capture the packets on existing IP network. You would conduct the
following troubleshooting steps:
a. Start capturing from your PC at the local site.
b. Make a VoIP call that will have one-way audio.
c. Analyze the capture packet.
d. If the problem has been found, then resolve it and retest it again.
e. Otherwise run the capture tool, using another IP phone and restart the capturing test.
6) If the problem is intermittent, then a long-term simultaneous capture at multiple points can be used to
attempt to capture a complete call with the problem. Most capture tools will let you capture only traffic
from selected devices, so the volume of captured information can be kept to a reasonable size.
7) Finally, submit the test report to the Panasonic Technical Support’s e-mail address:
3DQDVRQLF7HOHSKRQH6\VWHPV
See More
Panasonic Manuals www.voicesonic.com
Phone 877-289-2829
Andere Handbücher für KX-TDA50
22
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
Andere Panasonic IP-Telefon Handbücher
Panasonic
Panasonic T-Mobile KX-HDV130 Service-Handbuch
Panasonic
Panasonic KX-UT133-B Bedienungsanleitung
Panasonic
Panasonic KX-TDA5920 Bedienungsanleitung
Panasonic
Panasonic KX-T7420 Bedienungsanleitung
Panasonic
Panasonic KX-TD7685 - Wireless Digital Phone Bedienungsanleitung
Panasonic
Panasonic KX-TVP100E Bedienungsanleitung
Panasonic
Panasonic KX-UT113 Bedienungsanleitung
Panasonic
Panasonic KX-UDT131 Bedienungsanleitung
Panasonic
Panasonic KX-TGP500 Handbuch
Panasonic
Panasonic KX-TD208E Technische Daten
Panasonic
Panasonic KX-TGP700 Bedienungsanleitung
Panasonic
Panasonic KX-UTG200 Bedienungsanleitung
Panasonic
Panasonic KX-UTG200 Service-Handbuch
Panasonic
Panasonic KX-UDT111 Bedienungsanleitung
Panasonic
Panasonic KX-NCP0158 Bedienungsanleitung
Panasonic
Panasonic KX-UT123 Handbuch
Panasonic
Panasonic KX-WT125 Bedienungsanleitung
Panasonic
Panasonic KX-UTG200 Bedienungsanleitung
Panasonic
Panasonic KX-TGC310UE Bedienungsanleitung
Panasonic
Panasonic KX-UTG200 Bedienungsanleitung
