Panasonic KX-NT543 Bedienungsanleitung

Quick Reference Guide

IP Proprietary Telephone

Model No. KX-NT543/KX-NT546

KX-NT560

Thank you for purchasing an IP Proprietary Telephone (IP-PT). Please read this

manual carefully before using this product and save this manual for future use. For

more details, please refer to the manuals of the PBX.

This product supports the following PBX versions and CODEC

types:

KX-NS1000: PSMPR Software File Version 2.0000 or later

KX-NCP500/KX-NCP1000: PBMPR Software File Version 7.1000 or later

KX-TDE100/KX-TDE200: PMMPR Software File Version 7.1000 or later

KX-TDE600: PGMPR Software File Version 7.1000 or later

CODEC: G.722, G.711, G.729A

Note

RIn this manual, the suffix of each model number (e.g., KX-NT546NE) is omitted

unless necessary.

Open Source Software Notice

Parts of this product use open source software. For details about the open source

software, refer to the following web site at:

http://panasonic.net/pcc/support/pbx

Trademarks

RPlantronics is a trademark or registered trademark of Plantronics, Inc.

RThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and

any use of such marks by Panasonic Corporation is under licence.

RAll other trademarks identified herein are the property of their respective owners.

For Your Safety

To reduce the risk of injury, loss of life, electric shock, fire, malfunction,

and damage to equipment or property, always observe the following

safety precautions.

WARNING

Denotes a potential hazard that

could result in serious injury or

death.

General Safety

RDo not disassemble this unit. Dangerous electrical shock

could result. The unit must only be disassembled and

repaired by qualified service technicians.

RNever attempt to insert wires, pins, etc. into the vents or

other holes of this unit.

RTo prevent possible fire or electric shock, do not expose this

unit to rain or moisture.

RDo not splash water on the AC adaptor or the power cord,

nor get them wet. Doing so can result in fire, electric shock,

or injury. If they do get wet, immediately disconnect the AC

adaptor and power cord, and contact an authorised service

centre.

RDo not touch the AC adaptor for extended periods of time.

Doing so can lead to low-degree burns.

RIf damage to the unit exposes any internal parts,

immediately disconnect the cable or cord. If the power is

supplied from the network to the IP-PT

[Power-over-Ethernet], disconnect the Ethernet cable.

Otherwise, disconnect the AC adaptor cord. Then return this

unit to a service centre.

For Your Safety

RUnplug this unit from the AC outlet and have the unit

serviced by qualified service personnel in the following

cases:

A. When the power supply cord or plug is damaged or

frayed.

B. If liquid has been spilled on the unit.

C. If the unit has been exposed to rain or water.

D. If the unit does not work normally by following the

manual. Adjust only controls covered by the manual.

Improper adjustment may require repair by an

authorised service centre.

E. If the unit has been dropped, or damaged.

F. If the unit’s performance deteriorates.

RThis handset earpiece is magnetised and may retain small

ferrous objects.

RThe use of excessive sound volume through earphones,

headphones, or headsets may cause hearing loss.

RDisconnect this unit from power outlet/the Ethernet cables if

it emits smoke, an abnormal smell, or makes unusual noise.

These conditions can cause fire or electric shock. Confirm

that smoke has stopped and contact an authorised service

centre.

Installation

RDo not make power connections that exceed the ratings for

the AC outlet or power equipment. If the power rating of a

surge protector, etc. is exceeded, it can cause a fire due to

heat buildup.

RDo not bundle up the AC adaptor cord. The cord may

become damaged, which can lead to a fire, electric shock,

or electric short.

RThe unit should only be connected to a power supply of the

type as shown on the label on the unit.

RCompletely insert the AC adaptor into the AC outlet. Failure

to do so may cause electric shock and/or excessive heat

resulting in a fire.

For Your Safety

Medical (KX-NT560 only)

RDo not use the product in health care facilities if any

regulations posted in the area instruct you not to do so.

Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

RConsult the manufacturer of any personal medical devices,

such as pacemakers or hearing aids, to determine if they

are adequately shielded from external RF (radio frequency)

energy (the product operates in the frequency range of

2.402 GHz to 2.480 GHz and the power output is 2.5 mW

[max.]).

Placement

RCare should be taken so that objects do not fall onto, and

liquids are not spilled into, the unit. Do not subject this unit

to excessive smoke, dust, moisture, mechanical vibration,

shock, or direct sunlight.

RDo not place heavy objects on top of this unit.

RPlace this unit on a flat surface.

RAllow 10 cm clearance around the unit for proper ventilation.

Wall Mounting

RMake sure that the wall that the unit will be attached to is

strong enough to support the unit (approx. 1.5 kg).

ROnly use the optional wall mount kit with the unit. The wall

mount kit includes the necessary screws, washers, and wall

mounting adaptor.

RWhen driving the screws into the wall, be careful to avoid

touching any metal laths, wire laths or metal plates in the

wall.

RWhen this unit is no longer in use, make sure to detach it

from the wall.

For Your Safety

CAUTION

Denotes a hazard that could result

in minor injury or damage to the

unit or other equipment.

RKeep the unit away from heating appliances and devices

that generate electrical noise, such as fluorescent lamps,

motors and televisions. These noise sources can interfere

with the performance of the unit. It also should not be

placed in rooms where the temperature is less than 0 ºC or

greater than 40 ºC.

RWipe the unit with a soft cloth. Do not clean the unit with

abrasive powders or with chemical agents such as benzine

or thinner.

RThe handset hook poses a choking hazard. Keep the

handset hook out of reach of children.

RWhen left unused for a long period of time, disconnect the

unit from the AC outlet. When the unit receives power from

a PoE power supply, disconnect the Ethernet cables.

RWhen the unit is mounted on a wall, make sure the cables

are securely fastened to the wall.

Note

RIf the unit does not operate properly, disconnect the AC adaptor cord

and Ethernet cables and then connect again.

RIf you are having problems making calls, disconnect the Ethernet

cable and connect a known working IP-PT. If the known working

IP-PT operates properly, have the defective IP-PT repaired by an

authorised Panasonic factory service centre. If the known working

IP-PT does not operate properly, check the PBX and the Ethernet

cable.

RUnder power failure conditions, the IP-PT may not operate. Please

ensure that a separate telephone, not dependent on local power, is

available for use in remote sites in case of emergency.

RFor information regarding network setup of the IP-PT such as IP

addresses, please refer to the Installation Manual for the PBX.

For Your Safety

RIf an error message is shown on your display, consult your dealer or

the network administrator.

RUse only the correct Panasonic handset.

Important Safety Instructions

When using this unit, basic safety precautions should always be followed

to reduce the risk of fire, electric shock and injury to persons, including

the following:

RDo not use the unit near water, for example, near a bathtub,

washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool.

RAvoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock from

lightning.

RDo not use the telephone to report a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

For Your Safety

Important Information

For Users in Australia and the United Kingdom

RThis unit is capable of being used in conjunction with hearing

aids fitted with inductive coil pick-ups. The handset should be

held as for normal conversation. For operation, the hearing aid

should be set to its "T" position or as directed in the operating

instructions for the hearing aid.

RThis unit is designed to aid the visually handicapped to locate dial keys

and buttons.

For Users in the United Kingdom

RThis unit is designed to be installed under controlled conditions of ambient

temperature and a relative humidity.

RAvoid installing the unit in damp or humid environments, such as bathrooms or

swimming pools.

R999 and 112 can be dialled on the product after accessing the outside line for

the purpose of making outgoing calls to the BT emergency (999) and (112)

services.

For Users in New Zealand

RThis equipment shall not be set to make automatic calls to the Telecom ‘111’

Emergency Service.

RThis device is equipped with pulse dialling while the telecom standard is DTMF

tone dialling. There is no guarantee that the Telecom Lines will always continue

to support pulse dialling.

PTC General Warning

RThe grant of a Telepermit for any item of terminal equipment indicates only that

Telecom has accepted that the item complies with minimum conditions for

connection to its network. It indicates no endorsement of the product by

Telecom, nor does it provide any sort of warranty. Above all, it provides no

assurance that any item will work correctly in all respects with another item of

Telepermitted equipment of a different make or model, nor does it imply that any

product is compatible with all of Telecom’s network services.

The Use of IP Networks through the PSTN

RInternet Protocol (IP) by its nature introduces delay into speech signals as each

data packet is formulated and addressed. Telecom Access Standards

Important Information

recommends that suppliers, designers and installers using this technology for

calls to or from the PSTN refer to ITU E Model requirements in the design of

their networks. The overall aim is to minimise delay, distortion and other

transmission impairments, particularly for those calls involving cellular and

international networks, which already suffer extensive delay.

Echo cancellation

REcho cancellers are not normally required in the Telecom PSTN because

geographic delays are acceptable where CPE return loss is maintained within

Telepermit limits. However, those private networks making use of Voice over IP

technology are required to provide echo cancellation for all voice calls. The

combined effect of audio/VoIP conversion delay and IP routing delay can cause

the echo cancellation time of ³64 mS to be required.

Information for Users on Collection and Disposal of

Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents

mean that used electrical and electronic products and batteries should not be

mixed with general household waste.

For proper treatment, recovery and recycling of old products and used

batteries, please take them to applicable collection points, in accordance with

your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save

valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products and

batteries, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please

contact your dealer or supplier for further information.

Information on disposal in other countries outside the

European Union

These symbols are only valid in the European Union. If you wish to

discard these items, please contact your local authorities or dealer

and ask for the correct method of disposal.

Important Information

Note for the battery symbol (bottom two symbol

examples):

This symbol might be used in combination with a chemical symbol.

In this case it complies with the requirement set by the Directive for

the chemical involved.

For Users in the European Union

KX-NT543/KX-NT546

KX-NT560

1731

For information of Compliance with EU relevant Regulatory

Directives, Contact to Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

KX-NT560 only

Panasonic System Networks Co., Ltd. declares that this equipment is in

compliance with the essential requirements and other relevant provisions

of Radio & Telecommunications Terminal Equipment (R&TTE) Directive

1999/5/EC.

Declarations of Conformity for the relevant Panasonic products

described in this manual are available for download by visiting:

http://www.doc.panasonic.de

Important Information

Accessory Information

Included Accessories

Handset (1) Handset Cord (1) Stand (1)

Note

RThe illustrations may differ from the appearance of the actual product.

Optional Accessories

AC adaptor*1*2 KX-A239AL (PQLV206AL)

KX-A239BX (PQLV206CE)

KX-A239UK (PQLV206E)

KX-A239X (PQLV206)

KX-A239EJ (PQLV206E)

KX-A420BR (PSLP1662)

Wall Mount Kit KX-A433X

*1 To order an optional AC adaptor, please order using the "KX-A239xx/

KX-A420BR" model number (not "PQLV206xx/PSLP1662").

*2 For users in Argentina, power can only be supplied by PoE.

Accessory Information

Andere Handbücher für KX-NT543

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic IP-Telefon Handbücher

Panasonic

Panasonic KX-UDT 111 Gebrauchsanweisung

Panasonic

Panasonic KX-TGP600 Betriebsanleitung

Panasonic

Panasonic KX-TS100EXW Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Bedienungsanleitung

Panasonic

Panasonic KX-UDT 111 Bedienungsanleitung

Panasonic

Panasonic DIgital Super hy KX-T7425 Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Bedienungsanleitung

Panasonic

Panasonic T-Mobile KX-HDV130 Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Service-Handbuch

Panasonic

Panasonic KX-TGP550 Bedienungsanleitung

Panasonic

Panasonic KX-UT133-B Bedienungsanleitung

Panasonic

Panasonic KX-UT113 Bedienungsanleitung

Panasonic

Panasonic KX-NT136 Bedienungsanleitung

Panasonic

Panasonic KX-UT248 Bedienungsanleitung

Panasonic

Panasonic KX-HGT100-B Bedienungsanleitung

Panasonic

Panasonic KX-NCP0158 Bedienungsanleitung

Panasonic

Panasonic GSM EB-G500 Series Bedienungsanleitung

Panasonic

Panasonic KX-HDV100 Service-Handbuch

Panasonic

Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Bedienungsanleitung

Panasonic

Panasonic KX-DT321C Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Bedienungsanleitung

Panasonic

Panasonic DBS 576 Bedienungsanleitung

Panasonic

Panasonic KX-UTG 300B Bedienungsanleitung

Panasonic

Panasonic KX-TG6721EB Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung