Panasonic ET-DLE035C Bedienungsanleitung

ENGLISH

Model No. ET-DLE035C

DPQX1335ZB/X1

Fixed-Focus Lens 　　　　　　　　　

Operating Instructions

Thank you for purchasing this Panasonic product.

■To ensure correct use of this lens, please read the operating instructions supplied

with the lens and the projector carefully.

■Before using this product, be sure to read “Read this rst!” (Page 3).

■Please save this manual for future use.

Commercial Use

2-ENGLISH

Read this rst! ......................................................................................3

Before Use.............................................................................................4

Attaching the Lens / Detaching the Lens...........................................4

Before replacing the projection lens........................................................ 4

Attaching the Lens................................................................................... 5

Detaching the Lens ................................................................................. 6

Projection relationships.......................................................................7

Lens position setup and focus adjustment .......................................9

Lens position setup ................................................................................. 9

Focus Adjustment Function................................................................... 12

Specications .....................................................................................13

Dimensions .........................................................................................13

Dimensional relationship......................................... 附表 / Appendix 1

█ Contents

ENGLISH-3

Read this rst! Always follow these precautions

WARNING:

Do not look at or place your skin into the light emitted from the lens while the

projector is being used.

Doing so can cause burns or loss of sight.

zStrong light is emitted from the projector’s lens. Do not look at or place your hands

directly into this light.

zTurn o󰀨 the power when moving away from the projection lens or projector.

Do not project an image with the lens cover attached.

zDoing so can cause re.

CAUTION:

Before replacing the projection lens, be sure to turn o󰀨 the power and

disconnect the power plug from the wall outlet.

zUnexpected projection of light may cause injury to eyes.

zReplacing the projection lens without removing the power plug may result in electric

shock.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

zStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to the object, or malfunction of the lens and

projector.

zStrong light is emitted from the projector’s lens.

Do not open the desiccant bag. Do not eat the contents.

Inadvertently ingesting desiccant could be harmful.

zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water

and seek medical attention.

zKeep desiccant out of the reach of children.

4-ENGLISH

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating

instructions of the projector.

Attention

zMake sure that the projector power supply is switched o󰀨 before attaching or detaching the

projection lens.

zAfter removing the projection lens, store it safely away from vibration or impacts.

zDo not touch the electric contact points of the projection lens with your ngers. Dust and

dirt on the contacts may cause contact malfunctions.

zBefore attaching the Fixed-focus lens, remove the protective lm from the light projecting

surface and the lens cap from the lens.

Lens surface Light

projecting

surface

Lens cap

Protective lm

Attaching the Lens / Detaching the Lens

Before Use

 Supported projectors

PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C / PT-FRZ78C /

PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ97C / PT-FDW93C / PT-FDX110C /

PT-FDZ88C / PT-FDW85C / PT-FDX92C / PT-FD605CB / PT-FD601C

Note

zModels other than the above may also be supported. Refer to the operating instructions of

the projector you are using.

zIn this document, the alphabet letters at the end of the projector part numbers are omitted.

 Supplied Accessories

Make sure that the following has been provided. Numbers enclosed in < > show the

number of accessories.

Lens cap <1> Lens shift gauge <1>

(The product is

delivered with a

lens cap attached.)

ENGLISH-5

1) With this lens already passed

through the lens mount cover that

came with your projector, align the

positioning guide with the guide

groove on the projector, and insert

the lens fully.

zThere is a red dot at the bottom right

end of the positioning guide.

2) Turn the xed-focus lens clockwise

until you hear a click.

3) Attach the lens mount cover to the

projector.

zTurn the lens mount cover clockwise

to x it in place.

Attention

zGently turn the projection lens

counterclockwise to check that it will not

fall out.

Attaching the Lens

Attaching the Lens / Detaching the Lens (continued)

zBe sure not to touch the light projecting surface or the surface of the lens. Any ngerprints

or smudges on these surfaces will be magnied and lower the quality of the image

displayed on the screen.

zThe light projecting surface and lens are made of glass. The lens could be damaged if

brought into contact with or rubbed against hard objects. Handle the lens carefully.

zUse a clean, soft, and dry cloth to wipe away dust and dirt from the light projecting surface

and projection lens. Do not use u󰀨y cloths containing oil, water or dust for cleaning.

zWhen the Fixed-focus lens is removed from the projector, place it with the light projecting

surface facing downwards.

* Unless specied otherwise, the illustrations in these operating instructions show the lens used

with the PT-FDZ97C projector.

Guide groove

Lens mount cover

Positioning guide

Fixed-focus lens

6-ENGLISH

Attaching the Lens / Detaching the Lens (continued)

Lens mount cover

Lens release

button

1) Turn the lens mount cover

counterclockwise to detach it from

the lens and slide it towards the

front end of the lens.

2) Hold down the lens release

button while turning the lens

counterclockwise to release it.

3) Turn the lens mount cover

clockwise to reattach it.

Attention

zAttach the supplied lens cap before

storing the lens.

Detaching the Lens

ENGLISH-7

The dimensional relationship between the screen and the projector is shown below.

 Dimensional relationship diagram

Projected image

Screen

Note

zThe indications of this illustration are premised on aligning the projected image size and position

to the full screen.

zThis illustration is not drawn to scale.

SH Projected image height L3 Screen to projector front end

SW Projected image width L4 Screen to projector rear end

SD Diagonal length of the projected image A1 Bottom edge of the screen to the top of

the projector

L1 Projection distance

(from screen to mirror reective surface*) A2 Bottom edge of the screen to the bottom

of the projector

L2 Screen to lens front end

* The mirror reective surface is inside the xed-focus lens, and is not visible from the outside.

Note

zThe illustrations of projectors in this manual are for informational purposes only and do not

represent a specic projector model. Congurations may vary with the model.

zDimension L4 is the distance from the projector rear panel to the screen.

zDimension A2 is the distance from the bottom edge of the screen to the bottom of the

adjustable projector legs (with the legs fully screwed in).

Attention

zDimension L4 is not the distance from the projector rear panel to a wall, but the distance

from the projector rear panel to the screen. To prevent obstruction of the intake and

exhaust vents, install the projector with a clearance at least 500 mm (19-11/16") from walls

and objects.

When placing the projector in a conned space, a ventilation and/or air conditioning system

is required.

Exhaust heat may accumulate when the ventilation is not su󰀩cient triggering the protection

circuit of the projector.

zAvoid setting up in places which are subject to sudden temperature changes, such as near

an air conditioner or lighting equipment (studio lamps, etc.).

Projection relationships

8-ENGLISH

Projection relationships (continued)

zWhen using one of

PT-FDW93C / PT-FDX110C / PT-FDZ88C / PT-FDW85C / PT-FDX92C /

PT-FD605CB / PT-FD601C

If keystone distortion in vertical direction or horizontal direction is corrected, the projected

image overall will no longer be in focus. Set up the projector so that the projected image is

rectangular and the back of the projector and the screen are parallel.

zWhen using a projector other than one listed above

Please see "Setting up" in the operating instructions for the projector you are using.

 Dimensional relationship

zWhen using one of

PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C /

PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ97C / PT-FDW93C /

PT-FDX110C / PT-FDZ88C / PT-FDW85C / PT-FDX92C / PT-FD605CB / PT-FD601C

For details on projection distance (L1), and A1, A2, L2, L3 and L4 values, refer to "Projected

image size and Projection distance" or "Projection distance formulas" in the Appendix.

zWhen using a projector other than one listed above

Please see "Setting up" in the operating instructions for the projector you are using.

 Keystone distortion correction

When attaching this lens for use, regardless of the projector model, set up the projector

so that the projected image is rectangular and the back of the projector and the screen

are parallel. In addition, depending on the projector used, keystone distortion correction

may be feasible after setup.

zWhen using one of PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C /

PT-FRZ88C / PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C /PT-FDZ97C

For keystone distortion in the vertical direction generated within the angle range

below, select [MAIN MENU] → [POSITION] → [GEOMETRY] / [GEOMETRY(2D)] →

[KEYSTONE] → [VERTICAL KEYSTONE] to perform correction.

Keystone distortion in the vertical direction greater than this angle and keystone

distortion in the horizontal direction can be corrected but the projected image overall

will no longer be in focus.

Correction feasible angle (α): 0 - 5°

Screen

(Side view)

ENGLISH-9

Lens position setup and focus adjustment

Lens position setup

zWhen using PT-FRZ120C

When moving the lens position to the home position, perform the operation with the

following procedure.

1) Turn on the projector to start the

projection.

2) Press the < 菜单 >button to display

the [MAIN MENU] screen.

3) Select [PROJECTOR SETUP] in

the main menu and then press the

<执行 > button.

4) Select [LENS] in the [PROJECTOR

SETUP] menu and then press the

<执行 > button.

zThe [LENS] screen appears.

5) Select [LENS TYPE] on the [LENS]

screen and then use the

◄►

buttons to select [ET-DLE035].

zEach press of the

◄►

buttons

switches the item to [NORMAL] or

[ET-DLE035].

6) Select [LENS HOME POSITION] on

the [LENS] screen and then press

the < 执行 >button.

z A conrmation screen appears.

7) Use the

◄►

buttons to select [OK]

and then press the < 执行 > button.

z[PROGRESS] is displayed on the

[HOME POSITION] screen and the

projection lens moves to the home

position.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

MENU SELECT

SUB MENU

1/2

执行

1/2

MENU SELECT

SUB MENU

执行

PROJECTOR SETUP

PROJECTOR ID ALL

PROJECTION METHOD

LENS

OPERATION SETTING NORMAL

LIGHT OUTPUT 100.0%

BRIGHTNESS CONTROL AUTO

STANDBY MODE NORMAL

QUICK STARTUP OFF

NO SIGNAL SHUT-OFF DISABLE

NO SIGNAL LIGHTS-OUT DISABLE

MENU SELECT

CHANGE

LENS

LENS TYPE NORMAL

LENS HOME POSITION

LENS CALIBRATION

Note

zIf [LENS TYPE] is mistakenly set to [NORMAL], the projection lens will not move to the

correct home position.

10-ENGLISH

Lens position setup and focus adjustment (continued)

zWhen using one of PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C /

PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ88C / PT-FDW85C /

PT-FDX92C / PT-FD605CB / PT-FD601C

When moving the lens position to the lens standard position, perform the operation with

the following procedure.

1) Turn on the projector to start the

projection.

2) Press the < 移位 > button on the

remote control.

zThe shift adjustment screen appears.

3) Press the < 默认 > button on the

remote control while the shift ad-

justment screen is displayed.

zThe [HOME POSITION] screen

appears.

4) Use the

◄►

buttons to select

[ET-DLE030].

zEach press of the

◄►

buttons

switches the item to [NORMAL] or

[ET-DLE030].

5) Press the < 执行 > button.

z[PROGRESS] is displayed on the

[HOME POSITION] screen and

the lens position moves to the lens

standard position for ET-DLE035C.

HOME POSITION

ADJUST

默认

LENS

SHIFT

VERTICAL POSITION

HORIZONTAL POSITION

LENS

CANCEL

CHANGE

EXECUTE 菜单

执行

HOME POSITION NORMAL

Inhaltsverzeichnis

Andere Panasonic Linse Handbücher

Panasonic

Panasonic Lumix H-F007014 Bedienungsanleitung

Panasonic

Panasonic AW-LZ16MD73P Bedienungsanleitung

Panasonic

Panasonic WV-LZF61/2 Bedienungsanleitung

Panasonic

Panasonic ET-D3LEF70 Bedienungsanleitung

Panasonic

Panasonic AG-LW7208G Bedienungsanleitung

Panasonic

Panasonic H-PS14042PP Bedienungsanleitung

Panasonic

Panasonic Lumix H-ES12060 Installationsanleitung

Panasonic

Panasonic ET-DLE105C Bedienungsanleitung

Panasonic

Panasonic VW-W4907 Bedienungsanleitung

Panasonic

Panasonic Lumix H-FS14140 Bedienungsanleitung

Panasonic

Panasonic ET-PLF10 Bedienungsanleitung

Panasonic

Panasonic ET-C1W300 Bedienungsanleitung

Panasonic

Panasonic ET-EMS650 Bedienungsanleitung

Panasonic

Panasonic VW-CLT1P Bedienungsanleitung

Panasonic

Panasonic H-HSA35100PP Bedienungsanleitung

Panasonic

Panasonic ET-D75LE95C Bedienungsanleitung

Panasonic

Panasonic H-RS100400PP Bedienungsanleitung

Panasonic

Panasonic ET-D3QW300 Bedienungsanleitung

Panasonic

Panasonic Lumix H-ES200 Bedienungsanleitung

Panasonic

Panasonic H-FS14140PP Bedienungsanleitung

Panasonic

Panasonic ET-D75LE90 Bedienungsanleitung

Panasonic

Panasonic ET-EMW200 Bedienungsanleitung

Panasonic

Panasonic ET-DLE060C Bedienungsanleitung

Panasonic

Panasonic ET-D3LEW60 Bedienungsanleitung

Beliebte Linse Handbücher anderer Marken

Navitar

Navitar 1-62314 Leitfaden

Angenieux

Angenieux OPTIMO PRIME Bedienungsanleitung

Sealife

Sealife SL050 Bedienungsanleitung

Navitar

Navitar 1-51200 Leitfaden

MeCan

MeCan NY1S-a5100 Bedienungsanleitung

Tamron

Tamron SP 70-300mm F/4-56 Di VC USD Bedienungsanleitung

FujiFilm

FujiFilm FUJINON ZA17x7.6BERD-S6 Bedienungsanleitung

Navitar

Navitar 1-51332 Leitfaden

Leica

Leica APO-SUMMICRON-SL 1:2/50 ASPH. Bedienungsanleitung

Sony

Sony LKRL-Z200 Series Bedienungsanleitung

Cosina

Cosina Voigtländer SUPER NOKTON 29mm F0.8... Bedienungsanleitung

Arax

Arax PCS ARSAT H(K) 4.5/55 Bedienungsanleitung

Cosina

Cosina Voigtländer NOKTON Bedienungsanleitung

Cosina

Cosina Voigtländer NOKTON Bedienungsanleitung

Navitar

Navitar 1-51338 Leitfaden

Shamir

Shamir Star Einrichtungshandbuch

Canon

Canon J11ex4.5B Bedienungsanleitung

Sony

Sony SAL70200G2 Bedienungsanleitung